-
Quality control scheme construction organization design This data is the construction organization design of the quality control scheme, which is detailed and comprehensive, and can be used for reference. -
Quality control of design and construction of post cast strip Send you an engineering data. It will be of great help to engineers and technicians. -
Construction organization design of controlled blasting Control measures for blasting excavation of water intake head shaft -
Case of bridge construction organization design Case of bridge construction organization design -
Construction organization design of small bridges The reconstruction project of the new Xilai Bridge is a bridge project of Chuanxin Port. The bridge is located at the junction of Chuanxin Port and Xingfu North Road in Xilaiqiao Town, with a span of 10 meters+10 meters+10 meters, a deck width of 12.7 meters, and 35cm sidewalk railings on both sides. The construction of this section mainly includes the foundation, substructure, superstructure (including bridge deck pavement) and cone slope protection of Chuanxin Port Bridge. -
Construction organization design of bridge hanging basket Detailed design of construction process of bridge hanging basket -
Organization design of bridge power construction Section VI of A30 Expressway (Jiehe Outer Ring Road) belongs to A30 Pudong Section. It crosses Cao Road and Gaodong Town. It is located in the northeast corner of Caolu Town, east of Fengfeng Highway in South Sichuan and north of Gugao Highway; The construction scope of this bid is v119+000~v124+550, but (k20+500~k22+200) is the bid section of Huchongsu Interchange. -
Thesis on Bridge Construction Organization Design In the 21st century, with the rapid development of economy and the continuous innovation of science and technology, bridges, a key project related to national infrastructure, have been developed qualitatively. Especially in the construction of expressways and railways, as well as the construction of bridges across rivers and seas, China's bridge technology has a relatively mature theoretical basis and empirical methods both in design and construction -
Model of bridge construction organization design The beam yard is mainly composed of precast bridge sections. Each 56m box girder span is composed of 13 segments, 2.65m+3.4m+2 * 4.7m+5 * 3.8m+2 * 4.7m+3.4m+2.65m=57.1m (60cm wet joint between each segment). A total of 364 precast beam segments are required. The maximum lifting weight of beam section is 150 tons. -
Analysis on the construction organization design of a bridge This title is the construction organization design of a bridge, and its contents are only for reference. Thank you for your participation -
Construction organization design of a bridge in Chongqing The project (K0+258.526~K0+300.526) is a bridge project with a length of about 42 meters and a width of 54 meters, including pile foundation, cushion cap, abutment, bridge, retaining wall between piles, sidewalk and railing, rainwater and sewage drainage, earthwork backfilling works, etc. within the scope. -
Construction organization design of a road and bridge Phase I: take the north side of the current median as the enclosure, and construct Larsen steel sheet piles for enclosure. Vehicles will be moved to the north half of the road for two-way traffic. The road width is 2 motorways (4m * 2). People from east to west can only pass through the cofferdam on the north side. The current south half of the non motorized lane is used from west to east. -
Construction organization design of bridge reconstruction Chaoyang Bridge is located in Chaoyanghu Town, Pujiang County, with a total length of 57.54 meters and a width of 10 meters. -
Construction organization design of box bridge The Pudong Canal Bridge is a bridge project across the Pudong Canal on Chuanhuan South Road in Shanghai, including the main bridge (self anchored suspension bridge, which is the main content of this construction organization design), the approach bridge on both sides of the east and west, and the pedestrian ramp bridge on both sides. The road grade is urban secondary road grade I. -
Quality control of a construction procedure This document is about the quality control of a construction process, including the content of process quality control, the setting of quality control points, the inspection of process quality, the pre control of construction project quality, etc. It is accurate in design, detailed in content, and worth downloading. -
Construction organization design of bridge reinforcement **********The bridge is a newly built bridge crossing Zhujiashan River. The cross section of the bridge is distributed as 4m (sidewalk)+16m (roadway)+14m (river viewing platform)=34m (from north to south). The construction of the bridge was completed in August 2004, but the subgrade and approach slab behind the abutment on the east bank were not completed due to land acquisition. The bridge is orthogonal to the river -
Bridge maintenance construction organization design In order to ensure that other bridge parts will not be damaged during demolition, the bridge deck concrete pavement shall be cut into blocks by cutting machine, then excavated by excavator, and transported by dump truck. In order to improve work efficiency, all vehicles are prohibited from coming and going during construction. Warning signs are set up at the removed parts and special personnel are assigned to guard them to avoid accidents. -
Construction quality control and organization design scheme of highway and bridge in high-speed engineering The superstructure of the project adopts 20m span simple supported and then continuous prestressed concrete small box girder. The whole bridge is divided into two parts, and four simple supported to continuous small box girders are arranged at the left and right sides. Column pier is adopted for bridge pier, and single row bored pile foundation is adopted. The column diameter is 130cm, and the pile diameter is 150cm. Reinforced concrete rectangular section is adopted for pier capping beam, with end height of 0.8m, mid span height of 1.4m and width -
Construction technology and quality control design of cut-off wall This paper introduces the construction technology of the cut-off wall and the solutions to common problems, and summarizes some quality control measures in combination with the site management. -
Waterproof roof construction and quality control Building leakage is a common quality problem that has puzzled design, construction and users for many years. It affects the normal use of buildings, erodes the main structure of buildings, and shortens the service life of buildings. The treatment of building leakage is a long-term comprehensive prevention work. -
Construction organization design of prestressed bridge Construction organization design of prestressed bridge fabrication, erection and girder erection -
Bridge construction organization design scheme 2 Hanqu Bridge is located at K2+700 of Hedong Main Canal. The total length of the bridge is 42 meters, and the aperture is 3 equal spans and 14 meters. The upper structure is hollow slab, the lower part is column pier, and the rigid expanded foundation is used. The clear width of the bridge deck is 11.5m, the same width as the road, the clearance height under the bridge is 1.0m, and the maximum water level is 1136.12m -
Box bridge construction organization design - attached drawings The construction organization design of box bridge - attached figure, with detailed description, is available for reference and download. -
Road and bridge construction organization design This document is the construction organization design of road and bridge. The contents of the document are detailed and the data are available for reference. -
Construction and quality control of post cast strip Abstract: Reasonable setting and correct construction organization are the key factors for the successful setting of post cast strip. This paper expounds the principle, setting and construction of post cast strip in combination with actual construction cases. -
Construction organization design of a large bridge The main bridge adopts fully welded flat streamline closed steel box girder, and spatial double cable plane sector steel strand stay cables. The steel box girder is 3.0m high (at the center line of the bridge), and there are 16 pairs of 64 stay cables in total. The standard anchorage spacing on the beam is 15m, and the anchorage spacing on the tower is 2.0~2.5m. The connection with the cable tower is steel box anchorage, and the connection with the main beam is anchor box anchorage. Stay cable -
Power construction organization design of a bridge Section VI of A30 Expressway (Jiehe Outer Ring Road) belongs to A30 Pudong Section. It crosses Cao Road and Gaodong Town. It is located in the northeast corner of Caolu Town, east of Fengfeng Highway in South Sichuan and north of Gugao Highway; The construction scope of this bid is v119+000~v124+550, but (k20+500~k22+200) is the bid section of Huchongsu Interchange. -
Construction organization design scheme of a bridge The project is located in the urban area of Jiangyin, connected with Huancheng North Road in the east and Wuxing Road in the planning in the west. The main bridge continuously spans the old Xicheng Canal, Xicheng Canal and Tongjiang Road close to the canal in the west. -
Quality control of building concrete construction Abstract: How to control the construction quality of concrete works? First, control the quality of raw materials. Secondly, scientific preparation of concrete is a prerequisite to ensure quality. Third, do a good job in the field laboratory. Fourth, the concrete specimens are qualified, but not all structural concrete is qualified. Fifthly, workability is the main factor that determines the quality of concrete. -
Bridge construction organization design for bidding A complete set of construction organization design related to bridge bidding................... -
Construction organization design of bridges and auxiliary roads The construction organization design of bridges and auxiliary roads is detailed for the designer's reference. -
Bridge construction organization design scheme The bridge construction organization design scheme of a project has detailed description for reference and download. -
Construction organization design of urban box girder bridge In urban areas, the focus is on construction organization. It contains details of box girder transportation and prefabrication, and is located in the downtown area.
