-
Construction technology of general brick masonry General brick masonry construction technology! -
Technical disclosure of brick masonry construction Check whether the hammer head is broken and whether the handle is firm before throwing stones. The hammer shall be dropped according to the stone pattern, the hammer mouth shall be flat, and the drop hammer shall be accurate. The hammer shall be dropped in the direction to see if there is any danger in the vicinity, so as to prevent injury. -
Code for construction of building masonry Building masonry atlas water and electricity charges water and electricity charges are incurred, received, occurred, occurred, and occurred at the demonstration site -
Construction of lime sand brick masonry for complex building The construction sequence of the project is an objective law existing in the construction steps. According to the characteristics of the project and in order to ensure the full implementation of the project progress control points, the construction project should pay close attention to the early construction, try to provide the site for the subsequent construction, provide conditions, seize the time, and generally arrange the parallel construction by sections, so as to ensure the delivery and completion before the control points required by the total construction period. -
2011 Code for Construction of Masonry Structures The 2011 Code for Construction of Masonry Structures mainly refers to the relevant construction process and technical requirements of brick masonry. -
General brick masonry construction disclosure record The disclosure record of general brick masonry construction. doc is detailed and rich, which can be downloaded by netizens. -
Construction and key points of hollow brick masonry The strength grade of bricks must meet the design requirements, and shall be inspected and accepted according to the Load bearing Clay Hollow Bricks JC196-75 -
Measures to ensure the construction quality of brick masonry This data is a measure to ensure the construction quality of brick masonry. It is valuable and detailed for reference. -
Winter construction scheme of multi-layer brick masonry The project is located in the south of Changshan Road and east of West Ring Road. The drawings of the Garden Community newly built by the real estate development company are designed by the Design Institute Co., Ltd; 8 multi-storey buildings (1 #, 2 #, 3 #, 5 #, 8 #, 9 #, 10 #, 11 # buildings) are temporarily constructed in this project -
Technical disclosure of brick masonry construction 1.1 Non accessible insulation roof 15~20 thick 1:2.5 cement mortar leveling (laying woven steel mesh protective layer) APP waterproof coiled material one layer 40 thick C20 fine aggregate concrete (with Φ 4 @ 200 two-way) resin hydrophobic perlite slope making, the thinnest part 60 (slope I=3%) APP waterproof coiled material one layer 20 thick 1:2.5 cement sand -
Technical disclosure record of brick masonry construction It is not allowed to use a sledgehammer to build stones on the scaffold. Wear protective goggles when trimming the stones. It is not allowed to operate opposite to each other. Wear thick canvas protective gloves during operation. After the work is completed, the stone debris on the scaffold board shall be cleaned. -
Technical construction disclosure record of brick masonry When lifting blocks and components, pay attention to their center of gravity. It is forbidden to use lifting rods to haul blocks, and it is not allowed to lift blocks that are in danger of falling off. When the lifting rod rotates, it is strictly prohibited to stay the block above the operator or repair or process the block in the air. Stabilizing ropes shall be added when lifting long components. No work shall be carried out in the next floor when hoisting. -
Technical disclosure record of brick masonry before construction According to the drawing, the bus duct, integrated wiring duct, accessories and other equipment and materials must be kept intact during transportation. When using the elevator and hanging basket, you should obey the command. During transportation, you must prevent bumping to protect the finished products of this profession and other professions. During installation, you must protect the finished products of the floor from tools, accessories and other damage. It is required to coordinate with the elevated floor construction unit in time -
Detailed construction scheme of lime sand brick masonry The basic requirements are: the completion of the previous process should create construction conditions for the next process, and the construction of the next process should be able to ensure that the finished products of the previous process are complete and undamaged, so as to reduce unnecessary rework waste and ensure project quality. The construction flow direction is to make full use of time and space. Especially when grade separation operation is adopted, reasonable construction flow direction is not only the guarantee of project quality -
Construction scheme of secondary structure and brick masonry This data is: Construction Scheme for Secondary Structure and Brick Masonry, which is detailed and can be used for reference. -
Technical disclosure of foundation brick masonry construction Before mixing the mortar, add proper amount of water into the rotating mixer, and then add sand, cement, lime paste in turn. Add water and mix for at least 2min -
Construction scheme of brick masonry with brick concrete structure The project is located in Zhonghua Village, Yangma Town, Chongzhou City. The structural form is brick concrete and bottom frame structure. The building has five to six floors and 28 buildings in total. The total planned building area is about 83242.15 square meters, and the building height is 18.80 meters. -
Construction Scheme for Brick Masonry of Square Project The project is located in Zhongxing Street, Tuopai Town, Shehong County. The project name is Wanjin Square, Wuxianlou Village, Tuopai Town. The project has one underground floor and two overground floors for 1 # and 2 # buildings, one underground floor and 23 overground floors for 3 # and 4 # buildings. The building area is 53300 ㎡. The seismic fortification intensity of the project is 6 degrees, and the reasonable service life is 50 years. -
Special construction scheme for brick masonry works Building # 3 has a building area of about 31202.01 ㎡, a total height of 93 meters, 31 floors above the ground and 2 floors below the ground. The safety level of the building works is Grade II. The seismic fortification intensity is 6 degrees. The fire resistance rating is Grade I, and the building durability is 50 years. -
Special construction scheme for brick masonry works The corner and junction of the wall shall be built at the same time. If the joint cannot be built at the same time but must be reserved, it shall be built into an oblique joint. The length of the oblique joint shall not be less than 2/3 of the height of the oblique joint. If it is really difficult to leave oblique tenons, except for corners, straight tenons can be left, but the straight tenons must be made into convex tenons and provided with tie bars. -
Construction scheme of brick masonry with brick concrete structure 1. Snap the axis, wall body line and inspection line, snap the position line of door and window openings according to the actual specification and size of the incoming bricks, the experience line meets the design requirements, and complete the pre inspection procedures. 2. The height pole shall be erected according to the design elevation. The distance between height poles shall be 15~20m, or both ends of each wall. 3. There is a mortar mix proportion notice, and the mortar trial mold is ready. -
Latest GB 50924-2014 Code for Construction of Masonry Structures The latest GB 50924-2014 Code for Construction of Masonry Structures is detailed and rich, which can be downloaded by netizens. -
Steel structure construction specification (latest version) This design specification is the latest version in line with the national standards, which is very useful -
Construction process standard for brick masonry works Brick masonry is built with cement mortar or cement mortar mixed mortar. The production process of brick wall materials is simple, the construction is convenient, the work efficiency is high, the construction speed is fast, and the adaptability is strong. -
Construction Scheme for Brick Masonry of Jiaotong University The brick masonry construction scheme of Jiaotong University, specifically introduces the relevant information of the project and the specific construction scheme. -
GB50924-2014 Code for Construction of Masonry Structures GB50924-2014 Code for Construction of Masonry Structures GB50924-2014 Code for Construction of Masonry Structures -
General brick masonry process standard (construction preparation) This process standard is applicable to brick concrete, external brick internal formwork and brick wall masonry works with seismic structural columns in general industrial and civil buildings. -
Construction scheme of lime sand brick masonry for complex building 2) The safety production objective is to comprehensively implement the Production Safety Law of the People's Republic of China and the Regulations of the State Council on the Supervision and Administration of Work Safety in Construction Projects, improve the safety management level of the project, eliminate serious injuries, fatal accidents and other safety accidents (including poisoning, heatstroke, fire, electric shock, etc.), and control the monthly frequency of minor injuries below 1.2 ‰, Economic loss control -
Construction Scheme of Brick Masonry for a Residential Project in Huizhou ? The project is a commercial and residential building invested and constructed by Huizhou * * Real Estate Development Co., Ltd., which integrates commerce and residence. The project is located at No. Designed by Huiyang * * Architectural Design and Research Institute; Supervised by Huizhou * * Construction Supervision Company? The worker -
Construction scheme of shale hollow brick masonry The masonry structure of this project is infilled wall masonry. The external wall material of each building is JN200 thick sintered shale hollow brick wall (more than 12 holes), and the internal wall is 200100 thick JN sintered shale hollow brick wall (more than 12 holes, volume weight more than 800). Shale hollow brick shall meet 12 holes and above, wall thickness ≥ 25mm, rib thickness ≥ 7mm, strength grade ≥ MU -
Technical disclosure of hollow brick masonry construction The position lines of door and window openings, walls and structural columns shall be set out according to the construction drawings. Tie bars and lintel bars shall be planted and the pull-out test shall be qualified. Before brick masonry, the surface of floor masonry base shall be cleaned and watered. The bricks shall be watered 1-2 days in advance, and shall not be laid while pouring. The simple method for on-site inspection of water content shall be the brick breaking method. When the melting depth around the brick section is 15-2 -
Technical disclosure of brick masonry construction 1. Materials: MU15 ordinary bricks, DM M10-GB/T25181-2010, are used for the wall below the indoor floor, balcony brick barrage and ceiling parapet masonry; The wall above the indoor floor shall be constructed with A5.0 aerated concrete blocks, DM M5-GT25181-2010; Block dry unit weight ≤ 7.5kN/m -
Technical disclosure of brick masonry construction The number of operators on each scaffold board shall not exceed two, and the number of bricks stacked shall not exceed four in a single row. It is advisable to stand on one board and stack materials on the other. The scaffold shall not jump up or down sharply. -
Technical construction disclosure of brick masonry works Before tip opening, check whether the iron tip, sledge hammer, etc. have cracks and are firm; If any, it shall be repaired before use. The iron tip shall be fastened with a small hemp rope, and the hemp rope shall be firmly trodden with feet during operation to prevent the iron tip from flying out and hurting people. When turning the stones at the tip opening, use a stylus, and use small stones at the bottom slope of the stones to pad firmly to prevent the stones from rolling. -
Construction organization scheme for lime sand brick masonry of comprehensive building Construction scale: eight floors, building area of 11852m2 Structure type: eight floors reinforced concrete frame, height of 30.750m Masonry type: standard lime sand brick seismic fortification intensity: 7 degrees Building fire resistance rating: II -
Detailed winter construction scheme of multi-layer brick masonry 8 multi-storey buildings (1 #, 2 #, 3 #, 5 #, 8 #, 9 #, 10 #, 11 # buildings) are temporarily constructed in this project. In principle, the winter construction time is from November 15, 2011 to March 15, 2012. Winter construction starts when the outdoor daily average temperature is steadily lower than 5 ℃ for 5 consecutive days, and ends when the outdoor daily average temperature is steadily higher than 5 ℃ for 5 consecutive days.
-
one Latest masonry structure code -
two Atlas of brick masonry construction specifications -
three Code for construction of hollow brick masonry -
four Summary of brick masonry structure construction -
five Construction of brick masonry structure in winter -
six Code for perforated brick masonry structures -
seven Technical code for brick masonry structure -
eight Construction scheme of brick masonry enclosure