-
Code for Seismic Design of Buildings 2010 The latest seismic structural design code is applicable to the design of civil seismic structures. The content is detailed. Welcome to download -
Code for Seismic Design of Buildings 2010 There are 14 chapters and 12 appendices after this revision. In addition to maintaining the provisions partially revised in 2008, the main contents of the revision are: the provisions on seismic measures for fortification of 7 degrees (0.15g) and 8 degrees (0.30g) have been supplemented, and the design earthquake grouping has been adjusted according to the Seismic Ground Motion Parameter Zoning Map of China; Improved the formula of soil liquefaction; The seismic influence coefficient is adjusted -
Code for Seismic Design of Buildings 2008 According to the requirements of the Regulations on Post Wenchuan Earthquake Recovery and Reconstruction issued by the State Council and the No. 1 Revision of Earthquake Ground Motion Parameters of the disaster area revised by the Seismological Bureau, the fortification intensity of the disaster area has been changed accordingly, and it is proposed to add some amendments to the articles. A total of 28 to 29 articles have been changed. The contents are as follows: 1 Change of fortification intensity in disaster area, involving Sichuan, Shaanxi and Gansu -
Code for seismic design of building structures New version of Code for Seismic Design of Building Structures -
Code for Seismic Design of Buildings (latest) The latest national authoritative standard Code for Seismic Design of Buildings! Very comprehensive, detailed and practical! -
Code for Seismic Design of Hydraulic Structures [SL203-97] This title is Code for Seismic Design of Hydraulic Structures [SL203-97], and its contents are for reference only -
Appendix _A of Code for Seismic Design of Buildings This appendix only provides the seismic fortification intensity, the design basic seismic acceleration value and the design earthquake group used in the seismic design of building projects in the central areas of cities and towns at and above the county level in the seismic fortification areas of China. Note: In this appendix, "design earthquake groups I, II and III" are generally referred to as "group I, II and III". A. -
Detailed Interpretation of the Code for Seismic Design of Buildings The seismic code is one of the codes used for structural design with the highest frequency of appearance. Based on this, I will reinterpret the 2010 version of the seismic code, the key points of the new code and the differences between the old code, hoping to help the majority of netizens. -
Strong Article 2010 of Code for Seismic Design of Buildings Buildings in areas with seismic fortification intensity of 6 degrees or above must be designed for earthquake resistance. The seismic fortification intensity must be determined in accordance with the documents (maps) approved and issued within the limits of authority specified by the State. -
Code for Seismic Design of Buildings (GB50011-2010) This code is formulated to implement the national laws and regulations on construction engineering, earthquake prevention and disaster reduction, and to implement the policy of putting prevention first, so that after the earthquake fortification of buildings, the earthquake damage of buildings can be reduced, casualties can be avoided, and economic losses can be reduced. -
GB50011-2010 Code for Seismic Design of Buildings GB50011-2010 Code for Seismic Design of Buildings.. Include a description of the article.. For everyone to share -
GB50011-2001 Code for Seismic Design of Buildings GB50011-2001 Code for Seismic Design of Buildings -
Partial revision of code for seismic design of buildings Partial revision of code for seismic design of buildings -
Revision of Code for Seismic Design of Buildings This partial revision is based on the requirements of the Notice of the Ministry of Housing and Urban Rural Development on Printing and Distributing the 2014 Revision Plan of Engineering Construction Standards and Specifications (JB [2013] No. 169). The Chinese Academy of Building Sciences, together with relevant design, survey, research and teaching units, has made partial revisions to the Code for Seismic Design of Buildings (GB 50011-2010) -
Analysis of seismic design code for buildings in a certain place This material is an analysis of the code for seismic design of buildings in a certain place. It contains complete and detailed contents, which can be downloaded by designers for reference. -
Code for Seismic Design of Buildings GB50011-2001 This document is the Code for Seismic Design of Buildings GB50011-2001, which is detailed and clear, and has high reference value. It can be downloaded for reference. -
DL5073-2000 Code for Seismic Design of Hydraulic Structures DL5073-2000 Code for Seismic Design of Hydraulic Structures -
Comparative study of a seismic design code In this project, the seismic fortification target, seismic fortification category, site classification, response spectrum and seismic design method of the Chinese seismic code GB 50011-2010 and the Australian seismic code AS1170 4-2007 carried out a detailed comparative analysis, and pointed out the similarities and differences between the two codes, which is helpful to further understand China's seismic code GB -
Q&A of Code for Seismic Design of Buildings GB50011-2001 Q&A of Code for Seismic Design of Buildings GB50011-2001 -
Code for Seismic Design of Buildings GB50011-2010 This code is the Code for Seismic Design of Buildings GB50011-2010 for everyone to learn -
11 Code for load design of hydraulic structures 11 Code for load design of hydraulic structures -
Code for Seismic Design of Buildings - Clause description Code for Seismic Design of Buildings - Clause description -
Some Application Problems of the Code for Seismic Design of Buildings It's Mr. Dai's handout, and I've converted it to pdf version. -
Code for Seismic Design of Buildings 132885_GB50011-2010 The main contents of the revision are: adjusting the depth range and formula of site soil liquefaction discrimination, and adding the seismic settlement discrimination method of soft clay layer and corresponding treatment countermeasures; The damping adjustment coefficient and shape parameters of the seismic influence coefficient curve (response spectrum) are improved, and the calculation method of vertical seismic action is supplemented; -
Some Ideas on the Revision of the Code for Seismic Design of Buildings Some Assumptions about the Revision of the Code for Seismic Design of Buildings This paper introduces the situation and existing problems since the promulgation and implementation of the national standard "Code for Seismic Design of Buildings" GB50011-2001. For the upcoming new round of revision work, it puts forward some ideas such as the revision requirements and main contents, as well as the experimental research work needed to cooperate with the revision work. -
Code for Seismic Design of Buildings (2016 Edition) Code for Seismic Design of Buildings _ GB 50011-2010 (2016 version), the latest and clearest PDF version -
04 Code for Seismic Design of Buildings GB50011-2010 This data is: 04 Code for Seismic Design of Buildings GB50011-2010, which is detailed and can be used for reference. -
Code for Seismic Design of Buildings (GB50011-2010) Code for Seismic Design of Buildings (GB50011-2010) jointly issued by the Ministry of Housing and Urban Rural Development of the People's Republic of China -
Code for Seismic Design of Buildings, 16th Edition New version of seismic code, high-definition version, including appendix and clause description..................... -
Code for seismic design of hydraulic structures of hydropower projects Code for Seismic Design of Hydraulic Structures of Hydropower Engineering NBT 35047-2015 Good files can be downloaded if necessary -
Partial revision of Code for Seismic Design of Buildings GB11-2008 Partial revision of Code for Seismic Design of Buildings GB11-2008 -
Code for Seismic Design of Buildings GB 50011-2001 Code for Seismic Design of Buildings GB 50011-2001_Unified Training Textbook_Revision_ -
GB50011 Code for Seismic Design of Buildings, Partial Revision 2008-8-1 GB50011 Code for Seismic Design of Buildings, Partial Revision 2008-8-1 -
Code for Seismic Design of Buildings GB11-2008 (partially revised) Code for Seismic Design of Buildings GB11-2008 (partially revised) -
Code for Seismic Design of Buildings 2010 latest edition Code for Seismic Design of Buildings GB50011-2010, high-definition PDF contains regulations -
Official version of Code for Seismic Design of Buildings (GB50011-2010) According to the requirements of [2008] JB No. 65 issued by the Ministry of Construction, the Standard is revised by the Chinese Academy of Building Sciences in conjunction with relevant design, research and teaching units on the Standard for Classification of Seismic Protection of Building Engineering (GB 50223-2004). -
Complete Code for Design of Lightning Protection of Buildings This specification is formulated to make the lightning protection design of buildings (including structures, the same below) take lightning protection measures according to local conditions, prevent or reduce the casualties, cultural relics and property losses caused by lightning strikes on buildings, and ensure safety, reliability, advanced technology, and economic rationality. This specification is applicable to the lightning protection design of new buildings. -
Code for Seismic Design of Buildings (GB50011-2001) Code for Seismic Design of Buildings (GB50011-2001)
-
one Code for seismic design Building -
two Code for seismic design of buildings -
three Code for seismic design of buildings -
four Seismic code for hydraulic structures -
five Code for design of earthquake resistant buildings -
six Code for seismic design of buildings -
seven Code for seismic design of buildings -
eight Code for design of building grounding