Previously, the charging head networkHuaweiOwn or third-party brand with certificationChargerThe performance measurement shows that the charging power covers 22.5W, 40W, 66W, 88W, 90W, 100W, etc.
Recently, the charging head network has received another modelHuawei100WCharger, configured with a single USB-A port, which can support the SCP 100W fast charging protocol. Next, follow the charging head network to see this modelChargerHow about its performance.
Unpacking Introduction
Huawei100WChargerIt still continues the classic design of high flame retardant PC shell with white bright surface, with rounded edges.
The side concave processing makes it easier to insert and pull.
The output end panel is configured with a single USB-A port, and the female rubber core is orange;The words "100W" and "HUAWEI SuperCharge" are printed below.
The pins are still fixed, which is more stable on the wall or in the row;The input end panel is also printed withChargerSpecification parameter inscription of.
The supporting A to C fast charging line is bound and fixed with environment-friendly paper tape. The body of the line is soft, and the skin friendly TPE material is used as the outer cover, with excellent hand feel.
The wire rod sub end shell and the wire body have thickened injection design, which is more resistant to swing and bending in daily use;At the same time, the words "6A" are intaglio printed on the sub end housing.
The USB-C terminal has an internal non full PIN pin design, and the interior is classic orange.
The measured length of A to C fast charging line is about 101cm.
HuaweiThe length of 100W charger is about 54.95mm.
The height of Huawei 100W charger is about 54.84mm.
The width (thickness) of Huawei 100W charger is about 28.18mm.The size of the charger is about 54.95 × 54.84 × 28.18mm, the volume is about 84.92cm ³, and the power density is about 1.18W/cm ³ when the power of the charger is 100W. This power performance is quite good.
The weight of Huawei 100W charger is about 126.2g.
Protocol testing
The purpose of this test is to explore a complete protocol. At the same time, it is convenient for users to select devices according to specific protocols to achieve a better fast charging experience.
Combined with the supporting A to C charging wire, POWER-Z KM003C was used to measure that the USB-A port of Huawei 100W charger supports UFSFCP, SCP, QC2.0, DCP and other fast charging protocols.
When the test is conducted separately, it can read the UFS fast charge protocol voltage gear of the USB-A port, and supports five groups of UFS fast charge gears, namely 3.4-5.5V5A, 5.5-10V6.6A, 10-11V6A, 11-20V5A, and 20-21V4.7A.
When tested separately, the SCP fast charging protocol of the USB-A port can be read. The Huawei 100W charger supports multi gear intelligent adjustment between 3.4-21V 0.03-6A.
Product testing
Next, let's take a look at the specific use experience of Huawei 100W charger.The charging head network will take you to know this product from the aspects of compatibility test, full charging test, standby power consumption test, etc.
Compatibility test
During the compatibility test, we can clearly know the charging condition of the charger for each device. The charging head network will use dozens of models to test with the charger, presenting the real test data for the readers.
To charge Huawei Mate 60 Pro, the power read by POWER-Z KM003C is 18.29 4.23A 77.45W.
To charge the iPhone 15 Pro Max, the power read by POWER-Z KM003C is 5V 0A, which cannot be charged normally.
Summarize the measured product data to the table. On the whole, most of the tested mobile phones can shake hands at 5V and 9V. Only Huawei's own mobile phones can shake hands at 18V, and the maximum charging power is above 77W;Game consoles, tablets and laptops only run to 5V voltage.
The histogram shows that the charger has the best compatibility with Huawei's own mobile phones, which can reach more than 40W;The second is the model that supports UFS integrated fast charging protocol, with the overall charging power of about 23W;For other common mobile phones, the charging power is only about 10W;For Apple family buckets, game consoles and laptops that only support the PD fast charging protocol, they cannot be charged. On the whole, the compatibility of Huawei 100W charger's USB-A interface is average.
Full charge test
Huawei 100W charger selected Huawei Mate 60 Pro as the test object for the charging head network in terms of test equipment. The Huawei 100W charger and Huawei Mate 60 Pro were placed in a 25 ℃ incubator and powered on. The test results are as follows.
After connecting the power supply, shake hands with 18.5V voltage, and the power is stable at about 79W in the first two minutes;Then the power drops to about 43-75W and continues to charge until the 10th minute, while the voltage drops from 18.5V to 9V;Then the power drops to about 18W and continues to charge until the 11th minute;Then the power is increased to 40W and charged to the 21st minute;Then the power drops to 34W and is charged to the 24th minute;Then the power rises to 27W for 27 minutes, and then the power decreases continuously until it is fully charged. The whole charging process takes about 37 minutes.
The line chart is drawn. It can be seen that it takes 12 minutes for Huawei 100W charger to charge Huawei Mate 60 Pro to 50%, 23 minutes for 80%, and 37 minutes for 100%.
Let's see how Huawei's 100W charger performs in charging Huawei's MatePad.
After connecting the power supply, shake hands with the 18V voltage, and the power is stable at about 87W for the first 46 seconds;Then the power dropped to about 60W and continued to charge until the 20th minute, then the power dropped to about 56W and lasted for 27 minutes;Then the power is reduced to 43W and charged to the 34th minute;Then the power drops to 29W and lasts for 41 minutes;The voltage changes from 18V to 5V in one hour and five minutes, and then the power decreases continuously until it is fully charged. The whole charging process takes about one hour and eight minutes.
The line chart is drawn. It can be seen that it takes 21 minutes to charge Huawei MatePad to 50% with Huawei 100W charger, 36 minutes to charge to 80%, and 1 hour and 08 minutes to charge to 100%.
Summary of charging head network
Huawei 100W charger continues Huawei's classic white bright surface design, and is equipped with a single USB-A port, which makes the fixed pin wall plug more stable;Support Huawei 100W SCP super quick charge+UFS integration quick charge;However, because it does not support the PD protocol, the compatibility of other mainstream mobile phones in the market or tablets, game consoles, laptops and other devices that only support the PD fast charging protocol is relatively general.
In the charging test, Huawei 100W charger is used as Mate 60 ProMatPad Pro 13.2 charging models can both shake hands with 88W super fast charging. The charging time of both models is 37 minutes and 68 minutes, respectively, and the charging performance is excellent.On the whole, Huawei's 100W charger has good charging performance for Huawei's own mobile phones, and can also be downward compatible with 66W, 40W and other fast charging protocols.