The charging head network has purchasedShadowstoneInsta360The fill light of Flow mobile phone's PTZ is fixed on the phone clip through its own snap, and can be used when connected to the Type-C power supply interface of PTZ.The fill light adopts Ra95 high color rendering image level lamp beads, which can restore 95% of natural sunlight and provide true color restoration.
The fill light also has three color temperature modes of heating and cooling and mixing, and has three brightness options, a total of nine combinations.It also supports forward and backward rotation to meet the needs of different use scenarios.Here comesShadowstoneInsta360Disassemble the Flow mobile phone PTZ fill light to see the internal design and materials.
Spotlight, product appearance andInsta360Flow,The bottom is decorated with red color.
Product information close-up on the back, model: CINSBBBA, manufacturer:ShadowstoneInnovative Technology Co., Ltd., whose products have passed CE, FCC and UKCA certification.
Inside the packageInsta360There is also an instruction manual for the flow fill lamp.
ShadowstoneInsta360 Flow fill light is structurally composed of fill light, metal material fixing clip and extended USB-C short line. The overall design is very compact and light, convenient for users to assemble and use, and the strength is also guaranteed.
The surface of USB-C cable head shell is frosted for easy plugging, and Insta360 is also designed.
Internal close-up of USB-C male head, full of PIN design.
The support frame below the fill light is made of metal, and there are also fixing clips on both sides, so the auxiliary fixing is not easy to fall off, and the emphasis is also guaranteed.
The fixing clip is opened by manual extrusion.
The top fill light is rotatable, and the rotatable angle is also large, which is convenient for users to adjust to obtain the best fill light effect.
The top of the fill light is equipped with a color temperature selection button and a brightness selection button
Supply power to the shadow stone Insta360 Flow fill light, and the input power measured with ChargeLAB POWER-Z KT002 is about 0.52W.
Finally, the brightness and light color scenes of the shadow stone Insta360 Flow fill light are displayed. The above figure shows the measured scene of the three levels of brightness of the fill light.
The three light color scenes of cold light, mixed light and warm light are as above.
Disassembly of shadow stone Insta360 Flow fill light
After seeing the unpacking and display of the shadow stone Insta360 Flow fill light, we will take a look at the internal design and materials.
First pry off the hood along the joint between the hood and the housing.
The interior of the fill light is provided with a lighting plate, and both sides are fixed by screws.The light plate is welded with two rows of LED lights, including 9 cold lights+9 warm lights, a total of 18 LED lights, which are staggered in cold and warm colors.
Unscrew the fixing screws on both sides of the light board, take out the light board, and weld the red and black wires on the light board for power supply.
Weld two patch buttons, one MCU and one synchronous step-down circuit on the back of the lamp board.
The main control MCU is a 32-bit low-power MCU with M0 core. The maximum operating frequency is 24MHz. It comes from Core Sea Technology, and the model is CS32L010F8. It has 64KB FLASH memory and 4KB SRAM. It is packaged with QFN20 and used to control the brightness and color temperature of fill light.
A step-down chip, MP1605, is a synchronous step-down converter with 2A output current. The chip has a built-in switch tube, which supports 5.5 V input voltage, 100% duty cycle, output discharge and short circuit protection.
The inching button is pasted with high temperature adhesive tape to facilitate the extraction of the mounting machine.
Take a look at all of them and have a family photo.
Disassembly summary of charging head network
Yingshi Insta360 Flow mobile phone PTZ fill light has its own Type-C interface power supply cable, which is fixed on the phone clip through a snap, and connected to the PTZ's own Type-C power supply interface for power supply.The fill light has built-in Ra95 high color display lamp beads, which have three brightness levels and three color temperature options to meet different scene applications.
According to the disassembly of the charging head network, this fill light is a combination of cold light bulbs and warm light bulbs, with a total of 18 bulbs staggered.The interior of the fill light is equipped with the core sea technology CS32L010F8 MCU for brightness and color temperature control, and the core source semiconductor MP1605 synchronous step-down chip is used.The interior structure of the fill light is compact and the function is practical.