Long core network

Description:

STEVAL-MKI212V1 adapter board of STEVAL-MKI212V1 of STEVAL-MKI212V1 is designed to help evaluate MEMS devices in ASM330LHHX product family. The board provides an effective solution for rapid system prototype design and equipment evaluation directly in users' own applications. STEVAL-MKI212V1 can be plugged into standard DIL 24 socket. The adapter provides a complete ASM330LHHX pin and can

Description:

EVLVIPGAN50PD 45 W USB Type-C of STC ® The power transmission 3.0 adapter is an isolated power supply based on VIPERGAN50. The ViperGaN 50 is an offline high-voltage converter of VIPer series, with 650 V HEMT power GaN transistor, designed for quasi resonant flyback converter, which can provide up to 45 W of output power in a wide range. At

Description:

EVLMG4-500WIBCK of STC is a reverse buck converter based on MasterGaN4, which is specially designed for LED lighting applications requiring minimum size and high efficiency. The device embeds two GaN power transistors and a driver in the same package, allowing it to interface directly with any type of SMPS controller. Thanks to GaN technology and embedded driver, the operating frequency of converter can be higher than that of traditional M

Description:

ECS's ECS-3225MVLC series is a HCMOS surface mounted oscillator, which is packaged in a ceramic 3.2mm x 2.5mm x 1.0mm industrial standard package. These oscillators have multi volt capability to operate across+1.8 V,+2.5 V,+3.0 V, or+3.3 V compatible power supplies. They also provide a low current draw of up to 1.5 mA (no load) at 1.8 volts 20 MHz. ECS-......

Description:

Littelfuse's 435 series quick acting surface mount film fuse has an ultra small size (0402 size), which is very suitable for circuit secondary protection in space limited applications (such as handheld portable electronic devices). Features 50 A interrupting rating at 32 V DC small size, rated current 0.25 A to 5.0 A RoHS compliant, lead-free and halogen-free enhanced breaking capacity, high l2t sensitivity

Description:

Littelfuse's 494 series quick acting SMF is an ultra small (0603 size) film device designed for circuit secondary protection in space constrained applications, such as handheld portable electronic devices. This series of products are 100% lead-free and meet the requirements of RoHS directive. Features Compatible with lead-free solders and high temperature profiles High performance materials provide better performance in high temperature applications Mark the code on the top surface so that without testing

Description:

WAGO's 221 series compact splice connector provides flexible, fast and safe use, can be used in a variety of applications, and provides a large number of accessories. They come in many designs and variations. This process is very simple, just pull the lever up, insert the conductor, and then push the lever down. As a tool free lever driven connector, its 221 series splice connector can easily, quickly and safely connect 24 AWG to 10 AWG solid

Description:

TDK Lambda's RGA series of rugged, non isolated DC/DC converters can operate at 9 V to 40 V or 9 V to 53 V input voltages. The output voltage provided by these step-down converters can be adjusted from 3.3 V to 15 V, 3.3 V to 24 V or 3.3 V to 40 V, and the output current can reach 20 A. They are designed for harsh environmental applications, including robots, robots and robots

Description:

EPCOS B72314S2 * series (advanced S14 compact) of EPCOS/TDK disk varistor with lead can cover 175V to 150V wide working voltage RMS to 625VRMS single pulse current (8/20 µ s), and the maximum surge current capacity is up to 6000a. According to category 5 listed in the fourth edition of UL 1449, they provide a weight of 3000 a at 8/20 μ s

Description:

TE Connectivity's SFP112G SMT socket connector can meet the needs of the next generation data center by increasing the density of the existing SFP shape factor to achieve a speed of up to 112 Gbps. TE Connectivity is an industry leader in this field and one of the first companies in the market to use innovative thermal bridge technology to provide customers with enhanced signal quality, which is specially designed for 112

Description:

PGT646xNL series extends the pulse electronic EFD15 power transformer, which is famous for its versatility in DC/DC converter applications. The platform adopts innovative spool design to extend the creepage distance of the needle core to the minimum of 5.1 mm, which has the smallest impact on the size, and uses the 5+5 pin SMD platform design (22.0 mm × 16.5 mm x 11 mm). PGT646x series includes two transformers

Description:

ABLIC's s-35710 and s-35720 series facilitate the operation of CMOS timer IC with low current consumption, and are suitable for time management of relative time. These devices compare the timer value and the value written to the internal register, and then output an interrupt signal when the values match each other. S-35710M timer is a 24 bit binary up counter; The user can freely set the internal register data through the two-wire serial interface. It can be freely set

Description:

OnsemiRSL15 is based on Arm ® The ultra low power security Bluetooth Low Energy (BLE) 5.2 wireless MCU of Cortex ® - M33 processor is designed for connecting intelligent devices in industrial and medical applications. RSL15 has built-in power management, wide power supply voltage range, flexible GPIO and clock schemes and a wide range of peripherals, providing maximum design flexibility for high-performance and ultra-low power consumption applications

Description:

TE Connectivity's LUMAWISE power input terminal block (TB) provides a unique and highly engineered terminal block that can replace the traditional terminal blocks used in LED outdoor lighting lamps and high intensity discharge (HID) lamps, including high-pressure sodium lamps (HPS) and metal halide lamps (MHL), which are rapidly transitioning to LED lamps. TE's innovative design is replaced by vertical vice screw connection

Description:

Molex's SMB connector is a subminiature connector series, designed for 4 GHz applications, and available in 50 Ω and 75 Ω versions. The series includes snap on interfaces controlled by industry standards and specifications, which are easy to connect and disconnect. The SMB interface provides mechanical stability, and its relatively small size allows it to be used in applications with limited space. The rated temperature of SMB series is - 65 ° C to+165 ° C, and the voltage range is 335 VRM

Description:

Riedon series resistance temperature sensors are suitable for many applications. The RTDW series utilizes Riedon's expertise in wire winding technology to enable almost any resistance value and many temperature coefficients to be used for direct temperature sensing or temperature compensation. The most common TCR options include nickel (6000 ppm), Balco (4500 ppm), platinum (3850 ppm), and resealing (3500 ppm). Standard configuration

Description:

STEVAL-MKI212V1 adapter board of STEVAL-MKI212V1 of STEVAL-MKI212V1 is designed to help evaluate MEMS devices in ASM330LHHX product family. The board provides an effective solution for rapid system prototype design and equipment evaluation directly in users' own applications. STEVAL-MKI212V1 can be plugged into standard DIL 24 socket. The adapter provides a complete ASM330LHHX pin and can

Description:

EVLVIPGAN50PD 45 W USB Type-C of STC ® The power transmission 3.0 adapter is an isolated power supply based on VIPERGAN50. The ViperGaN 50 is an offline high-voltage converter of VIPer series, with 650 V HEMT power GaN transistor, designed for quasi resonant flyback converter, which can provide up to 45 W of output power in a wide range. At

Description:

EVLMG4-500WIBCK of STC is a reverse buck converter based on MasterGaN4, which is specially designed for LED lighting applications requiring minimum size and high efficiency. The device embeds two GaN power transistors and a driver in the same package, allowing it to interface directly with any type of SMPS controller. Thanks to GaN technology and embedded driver, the operating frequency of converter can be higher than that of traditional M

Description:

ECS's ECS-3225MVLC series is a HCMOS surface mounted oscillator, which is packaged in a ceramic 3.2mm x 2.5mm x 1.0mm industrial standard package. These oscillators have multi volt capability to operate across+1.8 V,+2.5 V,+3.0 V, or+3.3 V compatible power supplies. They also provide a low current draw of up to 1.5 mA (no load) at 1.8 volts 20 MHz. ECS-......