Gas stoves are household appliances in the kitchen. It is inevitable that they sometimes break down when used every day. Gas stoves are not high-tech products. For ordinary small faults, sometimes we can solve them ourselves. Domestic gas stove maintenance, gas stove failure and maintenance Gas stove use problems:
1、 Ignition failure (ignition failure):
1. The pulse igniter has no battery or the battery voltage is insufficient → Install the battery or replace the battery;
2. Whether the gas is stopped;
3. Improper or polluted ignition electrode and induction electrode → Adjust ignition electrode to a reasonable distance and clean the electrode;
4. If the air pressure is too high, the air flow speed is too fast, and the electric spark is impacted → the opening of the air source switch is properly adjusted to reduce the air pressure;
5. The ignition nozzle is too large, and the nozzle is too large, causing too much air flow, which impacts the electric spark → Replace the nozzle;
6. The roller head is damaged, causing ignition near the damaged part → Replace the magnetic head;
8. The ignition output cable is not firmly connected with the porcelain head → firmly inserted and stuck with 502 glue or other glue;
9. The output cable is damaged, resulting in ultra close spark → Replace the cable or wrap the damaged part with insulating tape;
10. The impact block inside the switch assembly is worn or broken → Replace with a new impact block, and pay attention to the correct installation position;
11. Poor contact of microswitch of pulse ignition master range → Repair or replace microswitch;
12. Spider web in front of ignition nozzle or ignition support → remove spider web;
13. The rubber hose is twisted or blocked → clear the blockage, correct or replace the rubber hose.
Gas stove maintenance and failure:
1. When the water heater is plugged into the power indicator, it will not be heated if there is no indication;
2. When the water heater is plugged into the power supply, the indicator light is on but the water heater is not heated;
3. If the water heater cannot be plugged in, it will trip;
4. The water heater is leaking, and the safety valve can be replaced if it leaks. If the tank leaks, please contact the manufacturer.
Gas stove maintenance, service hotline: --, check first, then quote, refuse to charge indiscriminately for maintenance, place orders online, do not collect door-to-door fees, our company, your full-time home appliance butler!
Common faults and maintenance methods of gas stove failing to ignite:
In the kitchen, whether it's making a loving breakfast for the family or rewarding yourself with a delicious snack, we can't do without our cooking utensils. However, sometimes the gas cooker will make some small tantrums, but often the whole kitchen will have to pay attention to it. If the fire can't be started, half of it will be fired. Can we only stare at these faults? Don't worry. Look down. There's a good idea.
Why do you find it difficult to ignite a new cooker? Many new users will immediately let go of the spark when they see it, which will reduce the success rate of ignition. It is recommended that users press down to the right position and then rotate left. When they hear the click, they will pause for 2-3 seconds (when using the Fangtai gas stove, it needs to be extended appropriately), which will greatly improve the success rate of ignition.
Why do you find it difficult to ignite when using a new cooker? Many new users will immediately let go of the spark when they see it, which will reduce the success rate of ignition. It is recommended that users press down to the right position and then rotate left. When they hear the click, they will pause for 2-3 seconds (when using the Fangtai gas cooker, different brands need to extend the use time appropriately), so that the success rate of ignition will be greatly improved.
The gas stove is a common kitchen appliance in our life. Due to long-term use and disrepair, various failures will occur. The following are some common gas stove failures and their maintenance methods:
1. Ignition failure: the possible causes are that the main air source switch is not turned on, the battery power is insufficient, the ignition needle has too much oil dirt, the ignition needle is improperly positioned, the microswitch is damaged, and the induction needle is short circuited. The corresponding maintenance methods include turning on the main air source switch, replacing the battery, cleaning the oil dirt on the ignition needle, adjusting the position of the ignition needle, replacing the microswitch and adjusting the induction needle.
2. Air leakage (or peculiar smell): the possible causes are aging, cracking or falling off of the rubber hose, failure to ignite the main fire at the furnace head, accidental flameout, and aging of the sealing rubber ring of the air inlet pipe. The corresponding maintenance methods include replacing or reconnecting the rubber hose, igniting after the gas is exhausted, and replacing the rubber ring.
3. Abnormal flame: possible causes include too small opening of air valve, low gas pressure and deviation of ion sensor needle from the flame. The corresponding maintenance methods include opening the air valve, checking whether the valve of the liquefied gas cylinder is open and whether the pressure reducing valve of the small river is faulty, and adjusting the ion sensing needle.
4. Incorrect flame color: if the flame color of the gas stove is red or the flame flickers, it means that the gas is not completely burned. Check whether the burner of the gas stove is cleaned. If there is iron deposition, it needs to be cleaned with acid cleaning agent.
5. Incomplete burner of gas range: if the burner of gas range is not complete, check whether the bracket of gas range is uniform first, and if not, adjust it. It is also necessary to check whether the burner of the gas stove has dust or grease, which needs to be cleaned.
6. Automatic ignition failure of gas cooker: if the automatic ignition failure of gas cooker occurs, it is necessary to check whether the power switch is turned on first, and then check whether the battery of the igniter is exhausted, and it is necessary to replace the battery. If the connecting wire of the igniter is loose, it needs to be reconnected.
When the gas stove emits peculiar smell, it is necessary to immediately turn off the gas switch and ventilate. Then check whether the connecting pipe of the gas stove leaks, and fasten it. If there is iron deposit on the burner of gas stove, it needs to be cleaned with acid cleaner.
Please note that if the gas cooker fails, it must be safe. Turn off the gas switch in time and take corresponding maintenance measures. If you are not familiar with the maintenance of gas stoves, it is recommended to seek the help of maintenance personnel.
