Operation method
The air outlet shall be kept smooth. It is not suitable to place large pieces of furniture at the air outlet to block the air outlet and increase power consumption.
Set the air conditioner mode to dehumidification mode. Set the snowflake mode (refrigeration) on the remote control to the water drop mode (dehumidification). Under this mode, the indoor blower will keep running at a low speed, and the compressor will also operate intermittently, so as to keep circulating, so as to achieve the effect of power saving and cooling.
When sleeping, switch to sleep mode. It can save about 20% electricity.
Select the angle of the air outlet. When the air becomes cold, the cold air flow is easy to go down, so when blowing the air conditioner in summer, the air outlet should be kept at an upward angle to make it easier to cool.
Putting an electric fan in an air-conditioned room can help to circulate indoor air and save electricity at the same time.
Reasonably install the air conditioning piping. The piping of the air conditioner is short and does not bend, and the cooling effect is good and does not consume electricity.
Avoid direct sunlight. In summer, when blowing air conditioners, draw curtains or shades to reduce solar radiation, which can save electricity and make it cooler.
Clean the filter screen regularly. Too much dust will plug the mesh, making the air conditioner more laborious and more power consuming. Therefore, it is very important to clean the filter screen regularly.
The air conditioner should not be turned off when going out for a short time. Frequently turning off the air conditioner will cause damage to the compressor, and the high voltage generated by restarting the air conditioner will consume more power.
If you go out for a long time, you can turn off the air conditioner 20 minutes in advance to save power.