1. How to make a sink under the table
Step 1: Prepare tools and materials
Tools required: electric drill, saw, electric hammer, wrench, screwdriver, cutting machine, grinder, etc.
Required materials: sink, stone table top, glue, sealant, water pipe, etc.
Step 2: Measure the size of the table top and the sink
First, measure the size of the stone countertop and the sink to ensure that the sink can be completely embedded in the countertop. At the same time, measure the position and size of the water pipe for adjustment during installation.
Step 3: Cutting table top
Use the cutting machine to cut the stone table top into the size and shape of the sink. When cutting, be careful not to cut excessively to avoid stone cracking.
Step 4: Install the water tank
Put the sink into the cut table and fix it with glue. Then apply sealant between the sink and the table top to ensure that water will not penetrate under the table top.
Step 5: Connect the water pipe
Connect the water pipe to the sink, and then place the sink in the space below the countertop. Finally, tighten the screw on the water pipe with a wrench to ensure that the water pipe will not leak.
2. How to remove the basin and sink under the platform
Step 1: Turn off the water source
Before removing the basin and sink under the platform, the water source must be closed to avoid water leakage of the water pipe.
Step 2: Remove the water pipe
Use a wrench to loosen the screw on the water pipe, and then remove the water pipe from the sink. If the screw on the water pipe is very tight, use lubricant to help loosen it.
Step 3: Remove the water tank
Use an electric hammer or saw to cut the glue and sealant on the sink, and then take the sink out from under the table.
Step 4: Clean the table top
After the sink is removed, clean the residue and glue on the table. You can use a grinder to smooth the table top so that you can install a new sink.
Step 5: Install a new sink
After selecting a new sink, install it according to the above method. During installation, pay attention to the size and position of the sink and the table top to ensure that the sink can be fully embedded in the table top, and the water pipe connection is correct without water leakage.