The method of adding cameras to Anritte video recorder is as follows:
 Step 1: take out the bracket and prepare tools and parts: check the size and model of the expansion plug and self tapping screw according to the predetermined installation position of the expansion plug, screw, screwdriver, hammer, electric drill and other necessary tools, test whether the bracket screw and the screw port of the camera base are suitable, whether the embedded pipeline interface is properly handled, and test whether the cable is unblocked, When ready, enter the installation program.
 Step 2: take out the camera, carefully install the lens according to the camera lens model and specification determined in advance (the infrared integrated camera does not need to install the lens), take care not to touch the lens and CCD to confirm that they are firmly fixed, connect the power supply, connect the host computer or use the monitor and small TV on site to adjust the aperture focal length.
 Step 3: Take out the support, expansion plug, screw, screwdriver, small hammer, electric drill and other tools, and install the support according to the predetermined position. After checking, install the camera in the agreed direction
 Step 4: If the shield needs to be installed, install the shield directly from here after the second step.
 1. Open the upper cover plate and tailgate of the shield
 2. Pull out the fixed metal sheet and fix the camera
 3. Install the power adapter into the shield
 Reset the upper cover plate and tailgate, straighten out the cables, fix them, and install them on the bracket.
 Step 5: Insert the BNC plug of the welded video cable into the socket of the video cable, and confirm that it is firmly fixed.
 Step 6: Insert the power output plug of the power adapter into the power socket of the surveillance camera and confirm its firmness.
 Step 7: Connect the other end of the cable to the control host or monitor (TV) to ensure it is secure.
 Step 8: Turn on the power supply of the monitoring host and the camera, and adjust the camera angle to the predetermined range through the monitor.
 How to add cameras to Anruite video recorder
 The method for adding cameras to Anritte video recorder is as follows
 First, you need to connect the camera, and then search for the device directly in the recorder settings, and then reassign the IP addresses of all devices. At this time, all images can be recognized, and then select Add to display normally. Even previously used cameras need to reassign the IP addresses before they can be used.