product name |
Instant glue |
Region oriented |
|
Hot melt adhesive type |
Instant glue |
Type of bonding material |
Instant glue |
Viscosity |
5w-30 |
Hardware plastic instant glue High temperature resistant glue Zhejiang instant glue Guangdong instant glue
Price ¥ 26.00 ¥ 23.00 ¥ 20.00
Starting batch 1-99 pieces 100-499 pieces ≥ 500 pieces
Suggested retail price ¥ 30.00 Brand nine point brand model JD-480
Type of bonding material: glass, rubber, ceramic, plastic, metal, stone, electronic components Classification of resin adhesive Acrylate adhesive shear strength 26 (MPa)
Active substance ≥ 99 (%) Active life 12 (min) Working temperature 25 (℃)
Shelf life 12 (months) Executive standard ROHS CAS 1
Typical viscosity 50 (cps) Complete curing time 24 (h) Viscosity 500
Curing method: room temperature curing, validity 12 months, functional bonding
Scope of use Technical support for plastic and metal featured services
Jiudian Electronic Toys Instant Adhesive JD-480
characteristic:
1. Pass the European Union ROHS standard and SGS test;
2. It is a low whitening instant adhesive prepared for the whitening phenomenon of instant adhesive after curing;
3. It is a single component with convenient construction. It is very suitable for continuous production line operation.
4. It has low odor, low whitening, moisture resistance and other properties;
Scope of application:
It belongs to methyl ethyl cyanoacrylate, and its low odor and low whitening characteristics are very suitable for electronic appliances and electronic instruments made of precision metals, plastics, ceramics, hardware, rubber and other materials, and for bonding electronic toys or being used in the cosmetics industry.
Performance Index
model
JD-430
JD-480
Product characteristics
Low odor, low whitening, medium viscosity, good humidity resistance
Low viscosity, low odor, no whitening
Scope of application
Precise bonding of metal, plastic elastic materials and cosmetics
It is suitable for bonding rubber, leather, plastic, metal and other materials, electronic and electrical instruments, automobiles, etc
colour
Colorless Transparent Liquid
Colorless Transparent Liquid
Viscosity (mpa. s)
1000-3000
5-120
Temperature range (℃)
-50~+120
-50~+80
Tensile strength (kg/cm2)
one hundred and fifty
one hundred and twenty
Shear strength (Mpa)
eight
eight
Curing speed (s)
50-80
50-80
Appearance/packaging
20g/piece
20g/piece
Warm prompt: The above performance data are typical data measured in the laboratory environment with temperature of 25 ℃ and humidity of 70%. They are only for customers' reference when using, and cannot be all data that can be achieved in a specific environment. Please refer to the test data when using.
usage method:
Before using the electronic toy instant bonding agent JD-480, remove the dust, oil stain, rust, etc. on the bonding surface with dry cotton cloth or sandpaper, and then wipe with cleaning agent to clean the bonding surface.
Unscrew the front cover of glue and use it; If there is glue at the bottle mouth, wipe the glue with a cotton cloth first, and then put a needle or PE dropper on it for use, so as to control the glue flow and use effect.
Apply a small drop of adhesive to the bonded surface, and immediately bond until it hardens. The hardening time varies from seconds to minutes. Practical strength can be achieved in about 30 minutes, and high strength can be achieved after 24 hours.
Clean the bottle mouth after use and tighten the cap.
matters needing attention
Do not wear woven gloves for use. The instant drying adhesive absorbed by the woven material of the gloves will quickly polymerize and generate high heat during the reaction, which will burn your hands, so please remember not to wear woven gloves for use.
If the eyes are accidentally touched, because the hard glue after curing will hurt the eyes, do not rub them with hands, and immediately wash them with a large amount of water or use warm towels to compress them, so that the eyelid sweat will naturally separate, do not force them open, and send them to the hospital for emergency treatment in serious cases; In case of skin contact, soak it in warm soapy water and remove it with unglued agent.
The instant drying adhesive is volatile and irritant. Please keep the workplace ventilated when using it in large quantities.
When there is a large amount of leakage, it can be cured with water and then scraped off.
Storage and packaging
This product should be sealed and stored in a ventilated, cool and dry place;
In order to extend the storage time, it can be refrigerated;
The warranty period is 12 months, and it can continue to be used after passing the test;
The packing specification is 10 pieces/box, 20 boxes/box.
View all introductions