Product features:
1. It has the properties of impermeability, frost resistance, salt resistance, alkali resistance, weak acid resistance, and bonding with various materials
Very strong.
2. Coefficient of thermal expansion vs concrete Therefore, it is not easy to detach from these bonded substrates and has good durability.
3. It can be applied on wet substrate surface without dry It can be hardened in wet environment or under water.
4. Convenient operation and construction cement mortar Similar construction, easy to clean, water can be cleaned.
Scope of application:
1. It is applicable to the treatment of defects such as honeycomb, loophole and exposed reinforcement on the surface of concrete structures.
2. Concrete structures stairs Repair the damaged steps.
3. Steel bonding reinforcement and bonding carbon fibre The bottom layer shall be leveled during reinforcement.
4. It can be used as a corrosion resistant material in seawater, saline alkali areas, chemical plants and other corrosive environments.
Usage of single component:
1. Check whether the package of the product is intact and the label is correct.
2. Open the lid and take out the ingredients of 2 bags B and C from the barrel
3. Shake material B and pour it into the bucket, then pour material C and fully mix it into a uniform mortar The shape is fine.
If the mixture is viscous or difficult to mix evenly, 1-2 kg of clean water can be added to the package for mixing
Sound performance.
Two component usage:
1. Check whether the package of the product is intact and the label is correct.. 2. Open the barrel lid and take out three bags of ingredients marked with A, B and C from the barrel. 3. Shake materials A and B evenly and pour them into the barrel respectively. After fully mixing, slowly pour the powder marked with "C" into the barrel while mixing, and mix them into a uniform mortar. If the mixture is viscous or difficult to mix evenly, 1-2 kg clean water can be added to the package for mixing without affecting the performance. matters needing attention:
1. This product is cement It takes 28 days for the base material to fully harden, and it can enter after 24 hours of use
Go to the next process. 2. The mixed epoxy mortar should be used up within 2 hours. If it becomes dry within this time
If it is thick, it can be mixed with proper water before use.
Packaging and transportation:
1. The packaging specification of this product is 20kg/barrel, and the unopened shelf life is 12 months. If the shelf life is exceeded, the product must be inspected
It can only be used after being checked. It can be transported as general goods.