Lavida water tank frame is disassembled by first removing the front bumper of the vehicle, then the anti-collision beam, the condenser, and finally the water tank frame. Lavida water tank is in the front compartment of the engine, near the engine. It is forbidden to open the lid of the kettle when the engine is high temperature is marked on the water tank. It is not allowed to fill ordinary water (tap water, mineral water) into the car water tank. It is necessary to fill the automobile engine coolant (zero temperature does not freeze at low temperature, 100 temperature does not boil at high temperature). The coolant will not produce scale, which can ensure the cleanness of the engine waterway. The maintenance method of automobile water tank is as follows:
1. Stop the vehicle and turn off the engine. When the coolant temperature drops, open the expansion kettle and fill in the water tank cleaner.
2. Start the engine until the cooling fan works, and then idle for 5-10 minutes.
3. Turn off the engine and remove the front bumper of the vehicle. When disassembling, make sure that all the fixing screws have been unscrewed. At the same time, slowly remove them from both ends to the middle. Do not break the fixing clips.
4. Make sure that the coolant temperature is completely cooled, and then drain the water tank cleaning agent with the coolant. Finally, replace the engine coolant with a new one.