1、 How to clean Xiaomi air purifier
1. How to clean Xiaomi air purifier? First, open the filter element hatch at the rear of the purifier, unlock and take out the filter element.
2. The air outlet and impeller of the millet purifier are detachable to facilitate the cleaning work of users. Press gently with both hands and rotate anticlockwise about 20 degrees to take out the air outlet cover at the top of the purifier.
3. One hand blocks the impeller from rotating, and the other hand rotates the impeller fastening device clockwise, holding the center of the impeller and lifting it up vertically to take out the impeller. It can be seen that there is also a lot of dirt accumulation in the air outlet area.
4. Use a vacuum cleaner to clean the dust accumulated at the honeycomb mouth at the lower part of the fuselage. Then clean the residual dust in the filter element compartment.
5. The garbage in some small parts of the upper corner of the millet purifier can be removed with an abandoned brush or toothbrush (pay attention to prevent dust from falling into the nacelle).
6. If conditions permit, too dirty millet air purifier filter element can be replaced in advance even if it does not reach the service life. If not, use a vacuum cleaner to remove garbage.
7. The air outlet net cover and impeller can be washed with water. It is better to add a moderate amount of neutral detergent. After cleaning, it can be dried.
8. * Wipe the machine in all directions with a damp cloth.
10. Start up test after cleaning. If the filter element is replaced, reset the filter element.
2、 How to clean the filter element of Xiaomi air purifier
How to clean the filter element of Xiaomi air purifier? When cleaning the filter element of Xiaomi air purifier, you should not blindly clean the filter element with water. Some filter elements cannot be cleaned directly with water. If the filter screen is installed in the filter element of Xiaomi air purifier, after it is dirty, you can intelligently replace it with a new filter screen, which cannot be cleaned.
If the millet air purifier filter element is electrostatic dedusting, water cannot be used to remove it. Soaking in water will destroy the electrostatic function of the air purifier filter element. After reinstallation, the effect of dedusting cannot be achieved. This kind of electrostatic filter element uses an intelligent outlet fan or some blowers to remove the impurities above.
There are also relatively simple filter elements, which can be cleaned directly with water. Therefore, when cleaning the filter element of the air purifier, it is necessary to distinguish the structure of the filter element. Different filter element cleaning methods are different.
3、 How to connect Xiaomi air purifier to wifi
(1) How to connect Xiaomi air purifier to wifi
1. Download and install the Xiaomi Smart Home app first.
2. Xiaomi air purifier starts. Open the "Smart Home" application and add a device in the upper right corner. Select the "Other" option in the * column
3. The wifi indicator on Xiaomi air purifier keeps flashing, and click "OK" on the mobile phone.
(2) Xiaomi air purifier connection app
Xiaomi air purifier app Android system can be used. The app that controls Xiaomi air purifier is Xiaomi smart home app, which can be applied on Android and Apple iOS platforms. It can be downloaded, installed and used in the Android App Store or Apple App Store.
As a household appliance product, Xiaomi air purifier aims to build Xiaomi ecosystem. Xiaomi's ecosystem is not closed, but relatively open. For example, Xiaomi earphones, Xiaomi bracelets, etc., not only Xiaomi mobile phones can be connected for use, but other Android smart phones can also be connected for use after downloading corresponding apps, including Apple, which currently does not support Windows mobile phones.