Xinxin will talk about the modification of jeep guiders and the knowledge points of about 120000 jeep guiders, hoping to help you with the problems you encounter.
1、; The jeep guide's headlamp modification diagram is as follows: the guide's operation method for LED headlamp modification is as follows: first ensure that the headlamp is closed, open the hood, find the position of the lamp, and remove the dust cover.
2. Unplug the power connector, pop out the spring clamp, and carefully pull out the original lamp.
3. Then take out the LED headlamp, hold the headlamp holder and rotate the lamp body counterclockwise to remove the holder.
4. Install the headlamp holder into the lamp holder and snap the spring back to its original position.
5. Insert the LED headlamp body into the holder and rotate clockwise to a certain angle to insert the lamp body into the holder.
6. Then connect the power cord, and insert the driver and power cord into the assembly (if the lamp socket is small, insert the driver into the assembly first, and then install the headlamp body).
7. Open the heat dissipation copper ribbon all around (to maximize heat dissipation) and insert it into the assembly.
8. Finally, cover the dust cover.
9. Light the test to complete the installation.
10. The most ideal LED light source to replace the traditional light source, it has a wide range of uses.
11. Mingtu's LED headlights have many advantages: first, energy saving: LED car lights are cold light sources, which generally consume less power, and the power consumed is not more than - W, which is more than 70% more energy than traditional light sources.
12. II. Environmental protection: there are no ultraviolet and infrared rays in the spectrum, neither heat nor radiation, small glare, recyclable waste, no pollution, no mercury, safe touch, and it is a typical green lighting led source.
13. III. Long service life: there is no loose part in the lamp body, and there are no defects such as filament burning, hot deposition, light decay, etc. Under proper current and voltage, the service life can reach 60000 to 100000 hours, more than 10 times longer than the service life of traditional light sources.