Floor renovation, old floor renovation, floor brightener, indoor and outdoor industrial floor treatment

Refurbishment of old ground cement ground curing agent Penetrant hardener Brightener Polishing liquid - Litec

Litec curing agent completely solves the problem of dust and sand on the ground, and improves the hardness and wear resistance of the ground for a long time Marble Glossy like!
【1】 First, under the condition that the ground is clean and tidy, according to the ground conditions, use 50 mesh, 100 mesh, 200 mesh and 500 mesh resin grinding discs to polish.
(Note: In these polishing operations, the transparent curing agent needs to be used once or twice, and the hardness should be well prepared first. This will enable faster coloring.)

【2】 After 500 meshes are polished and the ground is completely dry, use roller Or the brush starts to paint. According to the customer's requirements for color, one-time dyeing is required. After 24 hours of dyeing, use
1: 8 When the upper layer of curing agent does not bubble for about an hour (lengthen or shorten according to the ground conditions), polish it with 1000 mesh and 2000 day grinding discs. Wet grinding as far as possible. Then use cleaning pad and brightener to finish.
Note:
1. After polishing 500 meshes, the ground must be completely dry before dyeing. According to the ground conditions, the last curing agent may be required in this process.
2. Dyeing must be done at one time, not in batches.
3. After dyeing, wait for 24 hours or more before curing with curing agent.
4. During the 2000 mesh operation, turn the machine down a bit.