Performance and characteristics of concrete reinforcement agent:
1. Super permeability
Concrete reinforcing agent can quickly penetrate into the surface of concrete components. The higher the penetration degree, the more the rebound value increases
2. Long term improvement degree and hardness
It can solidify the components of concrete to form a hard entity, forming a three-dimensional space network structure, thus increasing the density, strength and hardness of concrete, and greatly improving the abrasion resistance and surface weather resistance of concrete. The rebound value of concrete component surface is increased by 10-40%.
The water binder ratio is an important indicator to ensure the strength and workability of concrete, and both must be taken into account to meet the construction quality of the project. The selection of water binder ratio shall be within a reasonable range as far as possible to avoid problems such as excessive adhesion and hardening of concrete caused by blindly pursuing low water binder ratio, or bleeding, shallow sand, low rebound value, etc. caused by high water binder ratio.
The strength of concrete is mainly controlled by water cement ratio cement Once a certain component of mineral powder and fly ash fluctuates, the strength of concrete will fluctuate.
Since the quality acceptance of concrete is based on its 28 day compressive strength, the quality feedback of production has a large lag, so the quality control in the production process is particularly important.
When the rebound strength of concrete fails to meet the design requirements, the use of Tianjin Xianghuan concrete brand concrete reinforcement can effectively improve the rebound value of concrete in 4-7 days, and solve the quality problems and disputes caused by low rebound value.
I Auspicious concrete Z2 Main functions of concrete reinforcing agent
one Rapid hardening concrete wall;
two Improve the compressive strength of the original concrete, improve the rebound strength of the wall, and improve the impact resistance of the concrete;
three Improve the overall appearance of concrete.
concrete wall How to solve the problem of insufficient rebound strength
2、 Auspicious concrete Z2 Applicable scope of concrete reinforcing agent
one The rebound of concrete wall is not enough, column The beam strength is poor;
two The strength of concrete ground is insufficient;
three The concrete strength shall be increased and the concrete grade shall be increased by one grade.
3、 Auspicious concrete Z2 Construction method of concrete reinforcing agent
one First, completely clean the dust on the wall and keep the base dry;
two Roll coating shall be adopted to drive away the materials evenly, so that the materials can fully penetrate into the concrete; forty Replenish the materials at any time at the place with drying phenomenon within minutes, and sweep the accumulated materials evenly. There should be no excessive aggregate, otherwise it is easy to cause the surface conjunctiva and affect the appearance.
three It should be noted that the amount of material is directly related to the porosity of the base course, and the effect can be achieved by painting for many times.
The rebound of concrete wall surface is improved, the concrete strength is not enough, the concrete is strengthened, the concrete surface strength is low, and the concrete reinforcement agent.
At present, Tianjin Zhengxiang produces pin There are more than 40 kinds of products sold in more than 100 specifications, and dozens of related application technologies can be provided at the same time. Tianjin Zhengxiang is committed to professional development, providing a wide range of specific, advanced technology products to meet consumer needs. It has a wide range of products and has become an important part of many buildings.
The enterprise development strategic planning of Tianjin Zhengxiang Technology Co., Ltd.: in order to seek long-term survival and development, based on the analysis and research of the external environment and internal conditions, the enterprise makes a long-term, systematic and integrated plan for its mission, objectives, business direction, major business policies, strategies and implementation steps with the correct guiding ideology
Tianjin Zhengxiang Technology Co., Ltd. was established in 2000. At that time, the country was implementing the transformation from a planned economy to a market economy, and the policy for private enterprises began to relax, with various opportunities emerging. With his own courage and vision, President Li of Zhengxiang Science and Technology entered the construction repair industry at the right time. After more than ten years of hard work, he has accumulated a certain amount of original capital. Change the means of promoting enterprise development from "distribution profit" to "innovation profit", including integrated innovation of strategic management, technology, products, marketing, etc. Effectively control product quality, reasonably plan marketing expenses, and appropriately strengthen cost advantages - Tianjin Zhengxiang Technology Co., Ltd. has always been flexible and steady, from victory to victory, from glory to glory!
