Xianghuan concrete Z2 concrete surface strengthening agent (super permeable)
1、 Purpose
The concrete surface reinforcing agent has * * * low surface tension, which can quickly penetrate into the concrete cement The byproduct of hydration, such as calcium hydroxide, undergoes secondary reaction, generating a large amount of silicon dioxide Gels, which can block the capillary pores inside the concrete, thus increasing the compactness, compressive strength, hardness and wear resistance of the concrete surface, and generally improving the concrete strength by 5-10MPa. The chemical reaction between the concrete surface reinforcement agent and the relevant components in the concrete is more complex. In addition to the formation of silica gel, it will also generate some hardening and dense substances, which will increase the strength of the concrete more significantly.
2、 Features
n ***、 It is tasteless, green and environmentally friendly, and produces chemical reaction through infiltration with concrete to form dense crystals. The construction is simple, and only spraying and brushing can achieve the ideal wear resistance, hardening strength;
N Infiltration and solidification: effective penetration of 1~30mm, chemical reaction with substances in the concrete, forming a dense whole; Compressive strength is increased by 10% - 40%, effectively improving * * * degree and density;
N Brightening and impermeability: make the hardened ground shiny and have good visual effect to prevent water and oil from seeping into the concrete.
3、 Performance
S/N | index | parameter |
one | appearance | Clear liquid |
two | Abrasion resistance | Difficult to wear, no peeling |
three | *** | 20 years |
four | Impermeability | 0.1ml/h |
4、 Usage
1. Base course requirements
The concrete surface shall be cleaned and kept dry. If the base course is relatively dense, it needs to be simply treated with steel brush, so that the concrete surface is loose and beneficial to absorbing materials
N After cracks and defects are repaired with Xianghuan concrete AB-1 grouting series and * * * repair materials, Xianghuan concrete Z2 concrete reinforcement is used for hardening treatment.
2. Hardening treatment
N Directly spray reinforcing agent to ensure that the base course is fully soaked and absorbed, and replenish the absorbed reinforcing agent at any time to maintain the wetting state and make the whole ground completely saturated;
N Sweep the excessive hardener at the low-lying place to the absorbed place at any time to ensure that the base course is fully absorbed within 2 hours, and there should be no accumulation of surplus materials;
N Spray twice a day at 5-6 hour intervals for three consecutive days.
4. Maintenance:
N It can be used normally after 7 days of drying and curing;
N The construction temperature should be 10~35 ℃, and outdoor operations should not be carried out in rainy days, strong winds and freezing conditions.
5、 Packaging