VALTRON ® TriAct ™ DF dicing solution series is made of non-ionic surfactant, disinfectant and other functional ingredients, and is suitable for semiconductor wafer dicing process. This product can effectively eliminate silica dust particles and sterilize the production system pipeline. It has low foam, fast defoaming and easy washing. The concentrated solution or low diluent of the scribing solution can prevent microbial growth, prevent corrosion, and reduce and neutralize the static charge. In addition to cleaning, VALTRON ® TriAct ™ DF series lubricating cutting blade can significantly reduce friction and surface tension when the dilution ratio is up to 1:4000, and act as a coolant to reduce the heat of silicon wafer cracking.
VALTRON®TriAct ™ DF310 is prepared by water-soluble coating and other additives to reduce surface tension and form protection
Coating, lubricating and wetting the substrate surface to prevent or reduce chips, burrs, silicon dust and heat induced cracking and ash
The corrosion in the process of semiconductor laser wafer cutting is inhibited. VALTRON ® DF310 laser dice is biodegradable.
Ablestik 3145 can resist low temperature and can bond metal, silicon dioxide, talc, alumina sapphire,
Ceramics, glass and plastics
ABLESTIK 3145 passed NASA standards. Product glue.
Loctite ABLESTIK 3145 is a strong, high impact key at room temperature to improve heat transfer and maintain electrical isolation.
It is often used in transistors, diodes, resistors, integrated circuits, and thermistors. Medical device bonding. Low temperature curing.
Loctite 3900 three proof paint, Loctite 3900 three proof paint, three proof paint, three proof paint, fast curing three proof paint, transparent coating, UV curing three proof paint, spraying three proof paint, common film coating three proof paint, silicon based three proof paint. Solventless three proof paint, automobile application three proof paint, compatible with solder mask, no cleaning flux, environmental protection three proof paint. Crc70 three proof paint, crc three proof paint, crc2403 three proof paint, red three proof paint, transparent three proof paint. The circuit board is coated with three proofing paint. Marine paint, seawater resistant paint
Henkel Henkel Loctite 2651 two-component epoxy potting adhesive Stycast 2651MM epoxy resin adhesive
LOCTITE ® STYCAST 2651MM CAT 23LV is a general-purpose packaging material designed for machine distribution and parts requiring post forming processing. LOCTITE ® STYCAST 2651MM CAT 23LV can be used for a variety of catalysts. For more information on mixing performance when used with other available catalysts, contact your local Technical Service Representative for assistance and advice. Product advantages: general low viscosity, low color, good processability, good adhesion to glass, thermal shock resistance and impact resistance, reducing wear of instruments/mixing equipment.
VALTRON ® AD4803A/B temporary adhesive system is made by VALTRON ® Two component epoxy resin system composed of AD4803A
Resin and VALTRON ® AD4803B hardener. The curing time of this adhesive at room temperature is about 2 hours. So fast
The curing adhesive system effectively sticks the material to the cut butyl board and allows rapid and effective removal. This series of
Temporary adhesive can replace temporary wax adhesive. The wax is not easy to remove after use, but VALTRON ®
The AD4803A/B system can be taken out with hot water in a few minutes.
Special functions
• Room temperature curing time is 2 hours
• Can be used in various packaging systems
• Hot water is easy to degumm
• Fully removable from all bonding surfaces
Using VALTRON ® Alkaline detergent
System Properties
colour
Specific gravity (25 ° C)
Viscosity, cps (# 7
Rotator, 20 revolutions per minute
25°C)
off-white
one point one four
