Quotation and pictures of silica gel in Xishuangbanna

XP-704 silicone rubber
Classification: Single package fast curing dealcoholized RTV silicone rubber
XP-704 silicone rubber is one component dealcoholized room temperature curing silicone rubber,

XP-704 silicone rubber has better temperature resistance than 703 rubber, and the temperature resistance can reach - 60 ℃~+250 ℃. Easy to disassemble and repair, no yellowing after curing, but not resistant to blisters, and slightly poor adhesive fastness (if conditions permit heating, the adhesive strength can be increased).

Operation process:
Clean the surface: clean the surface of stuck or coated components to remove dust, oil, rust, etc
Gluing: place the cleaned components at a stable place, unscrew the rubber tube cap, and install the matching plastic tip,

Use a blade to open the nozzle according to the required size, and squeeze the glue to the position where it needs to be coated. This adhesive is cured from the surface to the inside by absorbing the moisture in the air. The large curing void of the adhesive layer is 2~4mm. If the depth is more than 4mm, it is better to apply it twice. The curing time will also be extended in winter when the temperature is low.

706 Silicone rubber packaging specification:
45ml/metal hose, 200 pieces/box of 100ml/metal hose, 100 pieces/box of 300ml/plastic pipe, 25 pieces/box of 330ml/plastic pipe, 25 pieces/box

Classification:
XP-1323 silicone rubber is one component dealcoholized room temperature curing silicone rubber, which is non flowing, has good thixotropy, high elongation, does not yellowing after lighting, and has a flame retardant and flame retardant grade of FV-0, equivalent to UL94-0, good positioning, strong adhesion, and is mainly used for fixing, bonding and sealing.

key word:

XP-1323 silicone rubber is one component dealcoholized room temperature curing silicone rubber