Precautions for use of electrothermal constant temperature cultivation
Updated on: November 30, 2015 Number of hits: three thousand one hundred and fifty-two
Electrothermal constant temperature culture Technology microcomputer intelligent temperature controller, high temperature control precision, LED dual screen display, set temperature and actual temperature display at the same time, stainless steel liner, easy to clean, rust. Electrothermal constant temperature culture is applicable to the scientific research and industrial production departments such as medical and health care, pharmaceutical industry, biochemistry and agricultural science for bacterial culture, fermentation and constant temperature test.
Precautions for use of electrothermal constant temperature cultivation
1. The box is non explosion proof, so corrosive and flammable articles are not allowed to be put into the box.
2. Do not put the case in a corrosive environment containing acid and alkali to avoid damaging electronic components.
3. Pay attention to protecting the paint surface of the box to affect the appearance of the box.
4. If it is not used for a long time, the power supply should be cut off. It is strictly forbidden to let liquids enter the machine to avoid damaging the host.
5. The working voltage of this box is AC 220V, 50Hz. Before use, pay attention to whether the power supply voltage is consistent with the specified voltage, and effectively ground the grounding electrode of the power socket according to the regulations.
6. During power on use, it is forbidden to touch the electrical parts and the space on the left side of the box with hands or wipe them with wet cloth and flush them with water.
7. The power cord shall not be wound on metal objects or placed in high temperature or damp places to prevent rubber aging and electric leakage.
8. The test object should not be placed in the box too crowded to make the air flow smooth and keep the box evenly heated. The bottom plate of the inner chamber is close to the electric heater, so it is not suitable to place the test object. In the laboratory, the air roof valve should be properly unscrewed to facilitate the adjustment of the temperature in the box.
9. When the incubator is filled with valuable strains and cultures, it should be observed frequently. In case of abnormal conditions, the power supply should be cut off immediately to avoid external or unnecessary losses.
10. Do not open the temperature controller unnecessarily to prevent damage.
11. After each use, the power must be cut off. Always keep the inside and outside of the tank clean and the water in the tank clean.
12. When using at a high temperature, be careful of burns.
13. The fuse tube is installed in the left space of the box. The side door needs to be opened and the power must be cut off when replacing.
14. If the packaged incubator can not work normally within one year from the date of delivery (service life), the manufacturer shall replace or repair the parts for the user free of charge.