ST50 thermocouple | Japan RKC physicochemical ST-50 thermocouple

ST50 thermocouple | Japan RKC physicochemical ST-50 thermocouple

ST50 thermocouple | Japan RKC physicochemical ST-50 thermocouple ST50 thermocouple temperature measurement part with pasting function, suitable for hot press temperature measurement ， It is pasted on a small surface, and the temperature measurement is simple. The ST-50 pasted temperature sensor wire (thermocouple) is used for measuring the surface

It is a Japanese RKC physical and chemical brand product, including model ST-50, ST-50-300，ST-50-500。

1： Rapid responsiveness

In the case of metal surface, the response time of ST-50 (reaching 95% of the displayed time) is 0.4 seconds, and the time constant

(The time to reach 63% of the displayed time) is 0.04 seconds high speed.

Example) Pre heating paraffin (about 250 ° C) to make its response characteristics during leaching adopt large LED with identification signal of about 0.05 seconds

2： Measure high temperature

The high operating temperature of zui is 300 ℃, which can measure high temperature. It can also accurately measure the temperature of small surfaces with frequent temperature changes.
 

3： Excellent economy

Because ST-50 is adhesive type, it is easy to measure the temperature of micro surface. Strong adhesion, can be used repeatedly according to the use conditions.

Moreover, it is easy to replace the sensor by plug-in connection.
5 ST-50 sensors/1 group
Plug in wires are also provided.
1 piece/group for long type (ST-50-300, ST-50-500)

4： Strong adhesion

Heat hardening epoxy is used for strong adhesive, which can be pasted on most surfaces except for a small number of objects that are difficult to paste

Adhesion durability
To 150 degrees: can be repeatedly pasted and peeled for use
To 200 degrees: under the condition of no less than 150 degrees, it can be repeatedly pasted and peeled for use
To 250 degrees: under the condition of no less than 200 degrees, it can be repeatedly pasted and peeled for use
Above 250 degrees: cannot be pasted again
The times of pasting vary according to the use environment (cleanliness of the bonding surface, etc.)

5: Use case

Use ST-50 to measure the temperature of CPU heat sink

Test of various devices and temperature measurement during evaluation.
In order to obtain UL/CSA certification, it is very convenient to measure data (internal temperature, self heating, etc.).

6： Type of thermocouple

7： ST-50 plug-in wire

8： Model

ST-50 plug-in wire must be used when ST-50 is used

9： ST-50 plug-in wire

Plug in conductor for ST-50-DP-350/500 plug-in type (1M)

Plug in conductor for ST-50-Y terminal type (1M)

W-ST-50A new connecting cable
 


Ten: Precautions for use

When using ST-50, be sure to use ST-50 plug-in wire.

Since the thermocouple wire is very thin (50? M), please be careful not to bend the middle part and do not use excessive force.

When using, please clean up the oil stain and dust on the adhesive surface, and then press hard to make it stick.

When it is used for a long time at above 250 ℃, it will become light brown, but this will not affect its performance.

In addition: if the adhesive is used at high temperature for a long time, it will be baked hard and cannot be used again.