Product Center Products
Recommended products
two thousand and twenty-three - eleven - 07
● Overview WTN6040FP-14S is a high-power voice chip developed by Shenzhen Weichuang Zhiyin Electronics Co., Ltd. Its audio output type is PWM, and it has a built-in class D audio power amplifier circuit, which can directly push a 4W 3W speaker. Its output can work normally without LC filtering. It reduces EMI interference in the full bandwidth range and minimizes the impact on other components. At present, the speech length of WTN6040FP-14S is 40 seconds. The audio sampling rate is currently up to 32kHz, 16 level volume control, PWM output mode. The time of this chip
two thousand and twenty-three - eleven - 07
● Overview WT588F02BP-14S is a high-power voice chip developed by Shenzhen Weichuang Zhiyin Electronics Co., Ltd. Its audio output type is PWM, and it has a built-in class D audio power amplifier circuit, which can directly push a 4W 3W speaker. Its output can work normally without LC filtering. It reduces EMI interference in the full bandwidth range and minimizes the impact on other components. At present, the WT588F02BP-14S can store voice content of 170 seconds at most (if the customer has no requirements for voice quality, it can store voice content of 320 seconds at most). W...
two thousand and twenty-three - 09 - twenty-three
Module introduction: WTK6900HM01 is the recognition speech recognition module of the local speech trigger engine, which has the characteristics of low cost, high reliability and strong versatility. In terms of voice technology, it has achieved high reliable wake-up recognition rate, longer distance wake-up, lower false wake-up rate, richer number of voice control commands, stronger anti noise ability, and faster response recognition time. Module features: ● Core and storage - high-performance 32-bit core, 240MHz main frequency, support hardware floating point operation - built-in 1MB SPI FLASH ●&#
two thousand and twenty-three - 09 - fifteen
Product introduction WT2605C is a powerful high-quality voice chip, which uses a high-performance 32-bit processor and can reach a maximum frequency of 240MHz. It has the characteristics of low cost, low power consumption, high reliability, and strong versatility. The existing WT2605C-32N (small size 4 * 4MM) packaging chip. Customize serial communication protocol standard (AT) instructions. SPI Flash, TF card and USB flash drive are supported as memory. It has the functions of file index play, insert, single track cycle, all track cycle, random play, etc. The 31 level volume is adjustable, and the maximum support is
WT588F02BP series

WT588F02BP-14S high-power voice chip IC

Product features:

1. The working voltage is 2.5V~5.5V (in order to make the power amplifier work normally, the minimum working voltage is recommended to be no less than 3.0V);

2. Audio output mode: 16bit PWM;

3. Direct drive 4R 3W@5V Horn;

4. Support audio playback of 6K~32Khz sampling rate;

5. Customers can change the internal voice content of the chip through the supporting downloader;


Scope of application:
Time to market: two thousand and twenty-three - eleven - 07
Product description:
Product description:
● Overview WT588F02BP-14S is a high-power voice chip developed by Shenzhen Weichuang Zhiyin Electronics Co., Ltd. Its audio output type is PWM, and it has a built-in class D audio power amplifier circuit, which can directly push a 4W 3W speaker. Its output can work normally without LC filtering. It reduces EMI interference in the full bandwidth range and minimizes the impact on other components. At present, the WT588F02BP-14S can store voice content of 170 seconds at most (if the customer has no requirements for voice quality, it can store voice content of 320 seconds at most). WT588F02BP-14S is different from the traditional voice chip. It can change the internal voice content of the chip online through the matching downloader; The chip supports 1-wire and 2-wire serial communication. ● Function description 1. The working voltage is 2.5V~5.5V (in order to make the power amplifier work normally, the minimum working voltage is recommended to be no less than 3.0V); 2. Audio output mode: 16bit PWM; 3. Direct drive 4R 3W@5V Horn; 4. Support audio playback of 6K~32Khz sampling rate; 5. Customers can change the internal voice content of the chip through the supporting downloader; 6. Support 1-wire serial port and 2-wire serial port; 7. Support 1000 segments of address voice at most; 8. The chip has a built-in 220KB Flash, which can play high-quality voice for up to 170 seconds. 9. Flash type voice chip, chip master program and Flash data can be repeatedly burned. 10. The power on initialization time of the chip is about 200ms11. After the play of the chip is over and the I/O port (DATA and CLK) maintains a stable level (both high and low levels are available) for 1s, the chip goes into sleep 12. The chip is equipped with a class D audio power amplifier, with an efficiency of up to 88%, and no filter is required; 13. Built in short circuit protection, overcurrent protection and overheat protection; 14. Excellent full bandwidth EMI suppression capability 15. Excellent "power on/power off" noise suppression 16. Note: the PA2 pin of the chip is usually low and plays high ● Pin description Note: Do not add up and down to PA2, which may cause the IC to enter the non working mode. ● Remarks on limit parameters: the chip can work normally at - 40 ℃~+85 ℃ according to the laboratory test results of samples. ● Electrical characteristics VCC=3.0V, Ta=25 ℃ Note: when the chip is playing normally and initializing, the power supply should not exceed 1
  • product details

● General

WT588F02BP-14S is developed by Shenzhen Weichuang Zhiyin Electronics Co., Ltd High power voice chip The audio output type is PWM, and the built-in class D audio power amplifier circuit can directly push a 4 ohm 3W speaker. Its output can work normally without LC filtering. It reduces EMI interference in the full bandwidth range and minimizes the impact on other components. At present, the WT588F02BP-14S can store voice content of 170 seconds at most (if the customer has no requirements for voice quality, it can store voice content of 320 seconds at most). WT588F02BP-14S is different from the traditional voice chip. It can change the internal voice content of the chip online through the matching downloader; The chip supports 1-wire and 2-wire serial communication.



● Function description

1. The working voltage is 2.5V~5.5V (in order to make the power amplifier work normally, the minimum working voltage is recommended to be no less than 3.0V);

2. Audio output mode: 16bit PWM;

3. Direct drive 4R 3W@5V Horn;

4. Support audio playback of 6K~32Khz sampling rate;

5. Customers can change the internal voice content of the chip through the supporting downloader;

6. Support 1-wire serial port and 2-wire serial port;

7. Support 1000 segments of address voice at most;

8. The chip has a built-in 220KB Flash, which can play high-quality voice for up to 170 seconds.

9. Flash type voice chip, chip master program and Flash data can be repeatedly burned.

10. The chip power on initialization time is about 200ms

11. After the chip plays, and the I/O port (DATA and CLK) keeps the level stable (both high and low levels are available) for 1s, the chip goes into sleep

12. The chip is equipped with Class D audio power amplifier, with efficiency up to 88%, and no filter is required;

13. Built in short circuit protection, overcurrent protection and overheat protection;

14. Excellent full bandwidth EMI suppression capability

15. Excellent "power on/power off" noise suppression

16. Note: the PA2 pin of the chip is usually low, and the playback is high



● Pin description

 WT588F02BP-14S high-power voice chip IC

 WT588F02BP-14S high-power voice chip IC

Note: Do not add up and down to PA2, which may cause IC to enter non working mode.


● Limit parameters

 WT588F02BP-14S high-power voice chip IC

Note: According to the laboratory test results of the sample, the chip can work normally at - 40 ℃~+85 ℃.


● Electrical characteristics

VCC=3.0V, Ta=25℃

 WT588F02BP-14S high-power voice chip IC

Note: When the chip is playing normally and initializing, the power supply should not fluctuate more than 1.3V.


●  Typical application field | Product:

 WT588F02BP-14S high-power voice chip IC


●  Cooperative customers:

 OTP voice chip


●  Supporting tools:

 Repeatable voice IC


●  Online platform introduction:

Weichuang Zhiyin Online Voice Platform: https://wt588f.waytronic.com:8443/user/login?redirect=%2Fdashboard%2Fanalysis

Advantages of Weichuang Zhiyin online voice platform: platform based development process, fast and flexible development method, rich voice resource database, one minute voice editing, one click download and debugging, and accelerating the development progress of engineers' projects.


●  Product application field:

 Repeatable voice IC



Published: two thousand and twenty-three - eleven - 07
● Overview WT588F02BP-14S is a high-power voice chip developed by Shenzhen Weichuang Zhiyin Electronics Co., Ltd. Its audio output type is PWM, and it has a built-in class D audio power amplifier circuit, which can directly push a 4W 3W speaker. Its output can work normally without LC filtering. It reduces EMI interference in the full bandwidth range and minimizes the impact on other components. At present, the WT588F02BP-14S can store voice content of 170 seconds at most (if the customer has no requirements for voice quality, it can store voice content of 320 seconds at most). WT588F02BP-14S is different from the traditional voice chip. It can change the internal voice content of the chip online through the matching downloader; The chip supports 1-wire and 2-wire serial communication. ● Function description 1. The working voltage is 2.5V~5.5V (in order to make the power amplifier work normally, the minimum working voltage is recommended to be no less than 3.0V); 2. Audio output mode: 16bit PWM; 3. Direct drive 4R 3W@5V Horn; 4. Support audio playback of 6K~32Khz sampling rate; 5. Customers can change the internal voice content of the chip through the supporting downloader; 6. Support 1-wire serial port and 2-wire serial port; 7. Support 1000 segments of address voice at most; 8. The chip has a built-in 220KB Flash, which can play high-quality voice for up to 170 seconds. 9. Flash type voice chip, chip master program and Flash data can be repeatedly burned. 10. The power on initialization time of the chip is about 200ms11. After the play of the chip is over and the I/O port (DATA and CLK) maintains a stable level (both high and low levels are available) for 1s, the chip goes into sleep 12. The chip is equipped with a class D audio power amplifier, with an efficiency of up to 88%, and no filter is required; 13. Built in short circuit protection, overcurrent protection and overheat protection; 14. Excellent full bandwidth EMI suppression capability 15. Excellent "power on/power off" noise suppression 16. Note: the PA2 pin of the chip is usually low and plays high ● Pin description Note: Do not add up and down to PA2, which may cause the IC to enter the non working mode. ● Remarks on limit parameters: the chip can work normally at - 40 ℃~+85 ℃ according to the laboratory test results of samples. ● Electrical characteristics VCC=3.0V, Ta=25 ℃ Note: when the chip is playing normally and initializing, the power supply should not exceed 1
Hot Products / Related products More
two thousand and twenty-three - eleven - 07
● Overview WTN6040FP-14S is a high-power voice chip developed by Shenzhen Weichuang Zhiyin Electronics Co., Ltd. Its audio output type is PWM, and it has a built-in class D audio power amplifier circuit, which can directly push a 4W 3W speaker. Its output can work normally without LC filtering. It reduces EMI interference in the full bandwidth range and minimizes the impact on other components. At present, the speech length of WTN6040FP-14S is 40 seconds. The audio sampling rate is currently up to 32kHz, 16 level volume control, PWM output mode. The clock frequency of this chip is 13.1072 (± 3%) MHz. The chip can change the internal voice content of the chip online through the supporting downloader; The chip supports 1-wire and 2-wire serial communication. ● Function description 1. The working voltage is 2.0~5.5V (in order to make the power amplifier work normally, the minimum working voltage is recommended to be no less than 3.0V); 2. Audio output mode: 12bit PWM; 3. It can directly drive the 4R horn and output 3W@5V 4. Support audio playback of 6K~32Khz sampling rate; 5. Customers can replace it through the matching downloader
two thousand and twenty-three - eleven - 07
● Overview WT588F02BP-14S is a high-power voice chip developed by Shenzhen Weichuang Zhiyin Electronics Co., Ltd. Its audio output type is PWM, and it has a built-in class D audio power amplifier circuit, which can directly push a 4W 3W speaker. Its output can work normally without LC filtering. It reduces EMI interference in the full bandwidth range and minimizes the impact on other components. At present, the WT588F02BP-14S can store voice content of 170 seconds at most (if the customer has no requirements for voice quality, it can store voice content of 320 seconds at most). WT588F02BP-14S is different from the traditional voice chip. It can change the internal voice content of the chip online through the matching downloader; The chip supports 1-wire and 2-wire serial communication. ● Function description 1. The working voltage is 2.5V~5.5V (in order to make the power amplifier work normally, the minimum working voltage is recommended to be no less than 3.0V); 2. Audio output mode: 16bit PWM; 3. Direct drive 4R 3W@5V Horn; 4. Support audio playback of 6K~32Khz sampling rate; 5. Customers can change the internal voice of the chip through the matching downloader
Back to top
  • Your name:
  • *
  • corporate name:
  • *
  • Address:
  • *
  • Telephone:
  • *
  • Fax:
  • *
  • E-mail:
  • *
  • Postal Code:
  • *
  • Message subject:
  • *
  • detailed description:
  • *
     
COFCO Fu, No. 90, Dayang Road, Fuyong Street, Bao'an District, Shenzhen
Floor 2/3, Building 6, Robot Intelligent Manufacturing Industrial Park
WT1999@waytronic.com
4008-122-919
  • Mobile Cloud Website
  • WeChat official account
  •  

    Copyright © 2005 - 2016 Shenzhen Weichuang Zhiyin Electronics Co., Ltd

    YGPANB No. 44030602001141