Product Center Products
Recommended products
two thousand and twenty-three - eleven - 07
● Overview WTN6040FP-14S is a high-power voice chip developed by Shenzhen Weichuang Zhiyin Electronics Co., Ltd. Its audio output type is PWM, and it has a built-in class D audio power amplifier circuit, which can directly push a 4W 3W speaker. Its output can work normally without LC filtering. It reduces EMI interference in the full bandwidth range and minimizes the impact on other components. At present, the speech length of WTN6040FP-14S is 40 seconds. The audio sampling rate is currently up to 32kHz, 16 level volume control, PWM output mode. The time of this chip
two thousand and twenty-three - eleven - 07
● Overview WT588F02BP-14S is a high-power voice chip developed by Shenzhen Weichuang Zhiyin Electronics Co., Ltd. Its audio output type is PWM, and it has a built-in class D audio power amplifier circuit, which can directly push a 4W 3W speaker. Its output can work normally without LC filtering. It reduces EMI interference in the full bandwidth range and minimizes the impact on other components. At present, the WT588F02BP-14S can store voice content of 170 seconds at most (if the customer has no requirements for voice quality, it can store voice content of 320 seconds at most). W...
two thousand and twenty-three - 09 - twenty-three
Module introduction: WTK6900HM01 is the recognition speech recognition module of the local speech trigger engine, which has the characteristics of low cost, high reliability and strong versatility. In terms of voice technology, it has achieved high reliable wake-up recognition rate, longer distance wake-up, lower false wake-up rate, richer number of voice control commands, stronger anti noise ability, and faster response recognition time. Module features: ● Core and storage - high-performance 32-bit core, 240MHz main frequency, support hardware floating point operation - built-in 1MB SPI FLASH ●&#
two thousand and twenty-three - 09 - fifteen
Product introduction WT2605C is a powerful high-quality voice chip, which uses a high-performance 32-bit processor and can reach a maximum frequency of 240MHz. It has the characteristics of low cost, low power consumption, high reliability, and strong versatility. The existing WT2605C-32N (small size 4 * 4MM) packaging chip. Customize serial communication protocol standard (AT) instructions. SPI Flash, TF card and USB flash drive are supported as memory. It has the functions of file index play, insert, single track cycle, all track cycle, random play, etc. The 31 level volume is adjustable, and the maximum support is
WTN series

Selection of voice chip and voice module

Product features:

There are many kinds of voice chips. If you don't know how to select a voice chip suitable for your own product, you can refer to this article. Our company has focused on the voice IC industry for nearly 20 years, and the product application involves various industries. We hereby summarize the industry experience, hoping to help you further understand, so as to select a voice chip product suitable for your own.


Scope of application:
Time to market: two thousand and twenty-three - eleven - 07
Product description:
Product description:
At present, the voice chip and voice module available in the market can be selected according to the length of time and function. The following is some experience, hoping to be helpful to users who use voice chip for the first time. L In terms of time length: generally speaking, the time length of voice chip (default OTP: one-time) is 6~340 seconds. Basically focused on short seconds. It has clear sound, short time, low price, easy production, and unlimited order quantity, so it is a better choice for product testing. The price of 20 second chips on the market is about 2~3 yuan; About 4-5 yuan in 40 seconds; 170 seconds is about 9~10 yuan. In general, the manufacturer makes samples. When the user orders for service, the manufacturer burns the contents and gives them to the user. In this way, users can save some time. If the user's voice needs to be modified frequently, he can buy a set of programming (also called a burner, a downloader), learn how to make it himself, and then he can make it himself. The voice chip is mainly used in security access control, household appliances, medical equipment and other occasions. The OTP voice chip is a programmable one-time voice chip, which cannot be burned and written repeatedly. At present, our OTP voice chip has the WTN6 series (at present, many commonly used voice chips in the market choose the WTN6 series of voice chips with high cost performance and good sound quality). The storage capacity of the external flash voice chip is much larger than that of the OTP voice chip, and the audio content can be replaced repeatedly. At present, our external flash voice chips include WTV600 mixer chip, WT2000H high-quality chip, WT2003H series MP3 chip, and WT2605 high-quality MP3 decoding chip series. The structure of the voice module is about MCU+external memory, so its storage capacity is much larger than that of the chip, from 10 to 30 minutes. However, the price generally ranges from 20 to 80 yuan, several times that of the chip. The size is also larger than the chip, and the power consumption is slightly larger. The voice module integrates the voice chip with the peripheral circuit, and can be used without adding additional devices; At present, our voice modules include WT2003H series and WT2605 series. L From the functional point of view: OTP voice chips are disposable. They can be ordered in any quantity and shipped quickly, but they also have disadvantages: they cannot be burned repeatedly. Our company has produced some voice modules that can be rewritten repeatedly, such as WT588F series
  • product details


At present, the voice chip and voice module available in the market can be selected according to the length of time and function. The following is some experience, hoping to be helpful to users who use voice chip for the first time.

L Considering the length of time:

Generally, the duration of voice chip (default OTP: one-time) is 6~340 seconds. Basically focused on short seconds. It has clear sound, short time, low price, easy production, and unlimited order quantity, so it is a better choice for product testing. The price of 20 second chips on the market is about 2~3 yuan; About 4-5 yuan in 40 seconds; 170 seconds is about 9~10 yuan. In general, the manufacturer makes samples. When the user orders for service, the manufacturer burns the contents and gives them to the user. In this way, users can save some time. If the user's voice needs to be modified frequently, he can buy a set of programming (also called a burner, a downloader), learn how to make it himself, and then he can make it himself. The voice chip is mainly used in security access control, household appliances, medical equipment and other occasions.

OTP voice chip is a programmable one-time voice chip, which cannot be burned repeatedly. At present, our company's OTP voice chip There are WTN6 series (many commonly used voice chips in the market at present have high cost performance and sound quality WTN6 series voice chip )。

The storage capacity of the external flash voice chip is much larger than that of the OTP voice chip, and the audio content can be replaced repeatedly. At present, our external flash voice chips include WTV600 mixer chip, WT2000H high-quality chip, WT2003H series MP3 chip, and WT2605 high-quality MP3 decoding chip series.

The structure of the voice module is about MCU+external memory, so its storage capacity is much larger than that of the chip, from 10 to 30 minutes. However, the price generally ranges from 20 to 80 yuan, several times that of the chip. The size is also larger than the chip, and the power consumption is slightly larger.

Voice module It integrates the voice chip with the peripheral circuit, and can be used without adding additional devices; At present, our voice modules include WT2003H series and WT2605 series.

 

L In terms of function:

OTP voice chips are disposable. They can be ordered in any quantity and shipped quickly, but they also have disadvantages: they cannot be burned and written repeatedly. Our company has produced some voice modules that can be rewritten repeatedly, such as WT588F series voice module, WT2003H series voice module WT2605 series voice modules, some of which can be replaced by MCU or supporting burners, some can be replaced by voice content directly through USB port, and even can be downloaded remotely for voice updates. These powerful functions greatly enrich the connotation of voice modules, increase their application fields, and open up new horizons.

With the development of technology and the integration of products, voice chips have gradually replaced a variety of voice devices in various applications. The main characteristics of voice chips are low power consumption, strong anti-interference ability, few peripheral devices, simple control, long voice storage time (some voice chips can store content for 100 years), no loss of voice when power is off, and some chips can repeatedly erase voice content. Such as car reversing radar, electronic lock, treadmill, rice cooker, anti-theft system and other equipment are equipped with voice chips. As there are many kinds of chips with different functions, engineers will have some hesitation in selecting voice chips. Therefore, engineers who are new to the voice industry will be provided with some reference for selecting voice chips.

(In addition to the above two dimensions Introduction to selection of recording chip and playback chip ← Stamp here)

At present, with the popularization of AI AI concept, product innovation needs , Speech recognition scheme The application is also closer to daily life. The intelligent module is divided into two categories: voice recognition module and MP3 audio Bluetooth module; At present, our company's speech recognition chips include WTK6900F series and WTK6900G series. The speech recognition modules mainly include WTK6900F-B03, WTK6900G-B01, WTK6900H series, etc. It is a non-specific speech recognition scheme, the terms can be customized, and the special speech recognition scheme for the lighting industry is WTK6900F series; Bluetooth module mainly includes WT2605 Audio Bluetooth module Series.

 Selection of voice chip and voice module  

Shenzhen Weichuang Zhiyin Electronics Co., Ltd. has been specialized in the voice chip industry for more than 20 years. The above selection of voice chips is a summary of our industry experience. We hope it can help you understand our industry in the selection. If you are not sure how to select a model, you can consult our online engineers to sincerely provide you with a voice solution that is suitable for you and solve your problems with voice chip options.

 

FAQ:

1. Excuse me, I need to use very little voice content. In a few words, what type of voice chip should I choose?

A: Hello, if you don't have much demand for voice content, you can choose OTP voice chips from Shenzhen Weichuang Zhiyin Electronics Co., Ltd. You can recommend WTN6 series.

 

2. Because this is the first time I have access to a voice chip, I want to ask, what should I do to input the voice chip I want into the chip?

Answer:; Hello, the service of voice chip of Shenzhen Weichuang Zhiyin Electronics Co., Ltd. is roughly as follows: First, you can send us the voice content you need, which can be in written form (of course, it is better if you have a ready made voice). Then we will recommend a suitable voice chip according to your functional requirements, and then burn the voice content you need to use into the chip according to your requirements. Customers only need to send the corresponding instructions with the microcontroller to let the chip play the voice. If you want to burn your own different voice content into the chip, it is also possible. First, you can select a voice chip from Shenzhen Weichuang Zhiyin Electronics Co., Ltd., and then we will send you a supporting host computer software. Then you can operate according to the software's instruction manual to generate a burning document, and then use the download tool from Shenzhen Weichuang Zhiyin Electronics Co., Ltd. to burn the burning document into the chip, Then send the corresponding instructions to the chip to play the sound.

 

3. Hello, this is my first time to contact a voice chip. I want to know how to choose a suitable voice chip?

A: Hello, generally speaking, voice chips are chosen because voice related functions may be required in the product. First, you can choose a voice chip according to the capacity of your voice content. For example, if the required voice content is about tens of seconds, you can choose the OTP class of Shenzhen Weichuang Zhiyin Electronics Co., Ltd., such as the WTN6 series. For another example, if you need voice content, it may take several minutes, or even dozens of minutes. You can choose Shenzhen Weichuang Zhiyin Electronics Co., Ltd.'s repeatable erasable type, such as WT588F or WT2003H series; If you need to play different voice content for several hours, even days, or months, you can consider choosing WT2003H series from Shenzhen Weichuang Zhiyin Electronics Co., Ltd. Secondly, you can select the appropriate voice chip according to the function you want. For example, if you want to use the recording function, you can choose the WT2000H, WT588F recording chip of Shenzhen Weichuang Zhiyin Electronics Co., Ltd. or the WT2605 series. For example, if I only need tens of seconds or a few seconds of recording, you can choose the WT588F series. For example, if I want to record for a few minutes or hours, you can choose our WT2000H series. For example, if I want to record for hours, days or months, you can choose the WT2605 series from Shenzhen Weichuang Zhiyin Electronics Co., Ltd. You can also call the customer service personnel of Shenzhen Weichuang Zhiyin Electronics Co., Ltd. directly to talk with them about what you want to do in detail, and they will choose the appropriate voice chip for you.


Published: two thousand and twenty-three - 09 - 08
Physical image: interface operation instructions: this test board is compatible with WT588F and WTN6 series chips. Before use, the corresponding chips need to be correctly welded on the U1 position in the figure above, and the positions of other devices remain unchanged. 1: Power supply 2.4V~5.2V2: UART serial port communication interface, 3: chip IO port, can use USB downloader V1.00 to replace bin file 4: PWM output, when the test chip is PWM output, the horn can be placed here, when used for testing, the sound 5: PWM power amplifier is played, when using (WT1312) PWM power amplifier chip, select PWM power amplifier output mode 6: DAC power amplifier, use (LM4890) When DAC type power amplifier chip, select DAC power amplifier output mode 7: short press address minus (play sound) 8: short press address plus (play sound)
Published: two thousand and eighteen - 05 - fourteen
At present, the voice chips and voice modules available in the market can be selected according to the length of time and functions. The following are some experiences, hoping to be helpful to users who use voice chips for the first time. L In terms of time length: generally speaking, the time length of voice chip (default OTP: one-time) is 6~340 seconds. Basically focused on short seconds. It has clear sound, short time, low price, easy production, and unlimited order quantity, so it is a better choice for product testing. The price of 20 second chips on the market is about 2~3 yuan; About 4-5 yuan in 40 seconds; 170 seconds is about 9~10 yuan. In general, the manufacturer makes samples. When the user orders for service, the manufacturer burns the contents and gives them to the user. In this way, users can save some time. If the user's voice needs to be modified frequently, he can buy a set of programming (also called a burner, a downloader), learn how to make it himself, and then he can make it himself. The voice chip is mainly used in security access control, household appliances, medical equipment and other occasions. The OTP voice chip is a programmable one-time voice chip, which cannot be burned and written repeatedly. At present, our OTP voice chip has the WTN6 series (at present, many commonly used voice chips in the market choose the WTN6 series of voice chips with high cost performance and good sound quality). The storage capacity of the external flash voice chip is much larger than that of the OTP voice chip, and the audio content can be replaced repeatedly. At present, our external flash voice chips include WTV600 mixer chip, WT2000H high-quality chip, WT2003H series MP3 chip, and WT2605 high-quality MP3 decoding chip series. The structure of the voice module is about MCU+external memory, so its storage capacity is much larger than that of the chip, from 10 to 30 minutes. However, the price generally ranges from 20 to 80 yuan, several times that of the chip. The size is also larger than the chip, and the power consumption is slightly larger. The voice module integrates the voice chip with the peripheral circuit, and can be used without adding additional devices; At present, our voice modules include WT2003H series and WT2605 series. L From the functional point of view: OTP voice chips are disposable. They can be ordered in any quantity and shipped quickly, but they also have disadvantages: they cannot be burned repeatedly. Our company has produced some voice modules that can be rewritten repeatedly, such as WT588F series
Published: two thousand and eighteen - 04 - seventeen
Overview: WTN6006-8S-E chip is a voice chip specially used for electronic doorbell ringing. At present, there are 12 versions of "ding dong" sound effects with different sound colors to choose from. For specific "ding dong" sound effects, please contact our business personnel to provide sound effect files for audition. It has 5-level volume control and supports PWM output and DAC output. Accurate ± 1% internal oscillation, no need to add external oscillation, with ultra-low power consumption standby. Function overview: (1) Working voltage: 2.2V~5.5V (2) In standby mode, the static current is less than 5uA (3) Accurate ± 1% internal oscillation, with low-voltage reset (LVR=2.0V) (4) 12 bit PWM/DAC output, which can directly drive 8 Ω/0.5W speakers (5) Support key control mode (6) Support BUSY status output (standard program BUSY pin defaults to high level when idle, and low level during voice playback) Note: If customers need to use the "ding dong" sound effect provided by themselves, you can contact our business personnel to burn and produce the "ding dong" sound effect of customers. Pin description: limit parameter:
Published: two thousand and seventeen - 03 - seventeen
Introduction: WTN6 series is a multi-functional, low-power, high-performance CMOS voice chip. At present, there are five chips WTN6006, WTN6020, WTN6040, WTN6080 and WTN6170 (voice length is 6 seconds, 20 seconds, 40 seconds, 80 seconds and 170 seconds respectively). At present, the audio sampling rate is up to 32kHz, 16 level volume control, and two audio output modes PWM output and DAC output. Accurate+/- 1% internal oscillation, no need to add external oscillation, with ultra-low power standby. The WTN6 voice chip has the WT588F02 series of voice ic playing in the same category. It provides the lower computer software and burning test tools for the rewritable Flash voice chip. For details, please consult our online engineers. At the same time, in order to facilitate users to purchase and test samples, our company also launched the Voice Sample Box (VSB test tool), as shown in the following figure: → Customers who need to purchase can purchase at the same time. (Based on our experience, our company has carried out an analysis of industry selection for reference. The selection guide of recording chips and playback chips ← here, the selection guide of voice chips and voice modules ← here) Function description: (1) Working voltage: 2.4V~5.2V; (2) In standby mode, the quiescent current is less than 5uA (after the voice is played, the DATA/CLK signal line can sleep after maintaining a stable level for about 2 seconds); (3) Accurate+/- 1% internal oscillation, low voltage reset (LVR=2.0V) (4) 12 bit PWM pure audio output, which can directly drive 8 Ω/0.5W speakers and buzzers, DAC audio output, and external power amplifier; (5) Serial port control mode: digital pulse, key, 1-wire serial port, 2-wire serial port (6) supports BUSY status output (standard program BUSY pin defaults to high level when idle, and low level during voice playback. In addition, under serial port control mode, BUSY pin level changes only when voice chip receives correct voice address timing); Note for model selection: 1. The control mode and output mode of the chip have been set when the program is written, and cannot be changed again. When the chip is customized, the application requirements need to be explained with the salesperson. 2. Since the WTN6 needs a certain initialization time (about 100MS) to power on, and cannot respond to commands during initialization, it is necessary to complete initialization to receive control commands normally. 3. WTN6 chip two-wire serial port control DA
Hot Products / Related products More
two thousand and seventeen - 09 - 08
Introduction: (This product has been discontinued, and there are other new upgraded products with the same function at present, which can be consulted by our customer service) WT588S-16S and WT588SXX-16S are reusable voice chips (which can be encrypted, and the encryption function needs to be communicated with the customer service notes), which break through the traditional thinking, and are OTP voice chips+flash developed and produced for our company according to the market demand. This chip has flash attached to it, The contents on the flash can be repeatedly burned, with good sound quality, 12bit PWM output, direct push of 8 Ω/0.5W speakers, and volume adjustment function; Support MIDI, WAV format audio. (Based on our experience, our company has carried out an analysis of the industry selection for reference. A guide to the selection of recording chips and playback chips ← Here, a guide to the selection of voice chips and voice modules ← Here) Features and advantages: ☆ Support for multi variety SPI-FLASH (4Mbit-128 Mbit); ☆ One line and two line serial communication; ☆ Support the upper computer software to make BIN files, and then download them to FLASH; ☆ Support WAV audio format; ☆ Support 12 bit ADPCM decoding, (4K~30Khz); ☆ Support PCM
two thousand and seventeen - 03 - seventeen
Introduction: WTN6 series is a multi-functional, low-power, high-performance CMOS voice chip. At present, there are five chips WTN6006, WTN6020, WTN6040, WTN6080 and WTN6170 (voice length is 6 seconds, 20 seconds, 40 seconds, 80 seconds and 170 seconds respectively). At present, the audio sampling rate is up to 32kHz, 16 level volume control, and two audio output modes PWM output and DAC output. Accurate+/- 1% internal oscillation, no need to add external oscillation, with ultra-low power standby. The WTN6 voice chip has the WT588F02 series of voice ic playing in the same category. It provides the lower computer software and burning test tools for the rewritable Flash voice chip. For details, please consult our online engineers. At the same time, in order to facilitate users to purchase and test samples, our company also launched the Voice Sample Box (VSB test tool), as shown in the following figure: → Customers who need to purchase can purchase at the same time. (Based on our experience, our company has carried out an analysis of the industry selection for reference. A guide to the selection of recording chips and playback chips ← Here, a guide to the selection of voice chips and voice modules ← Here) Function description: (1) Engineering
two thousand and sixteen - eleven - fourteen
Product introduction (this product has been discontinued, and there are other new upgraded products with the same function, you can consult our customer service) WT588D voice module, which is an industrial voice module with high stability, meets the industrial temperature requirements, good sound quality, can be burned repeatedly, and a variety of pin packaging methods are available for customers to choose, It is a powerful voice module developed and produced by our company, which integrates voice chips with peripheral circuits and can be used without adding additional devices. This series of products are industrial grade modules, and the modules are divided into WT588DM01 and WT588DM02 replaceable voice modules. There are also recording, playback and recording modules, recording chips, various types of speech chips, speech recognition chips/modules, and MP3 decoding chips for users to choose from. Our company has been focusing on the voice chip industry for nearly 20 years. At present, we have served more than 5000 enterprises. Many well-known large enterprises at home and abroad have designated first-class suppliers. We are a high-tech enterprise with research and development, production strength, software and hardware strength, WT brand is popular in the voice industry. High cost performance ratio, high stability and high quality are our foundation. There are many kinds of products. We can basically provide whatever you need. We also provide free burning services and free technical services
two thousand and sixteen - eleven - fourteen
Overview: (This product has been discontinued, and there are other new upgraded products with the same function, you can consult our customer service) WT588D II voice chip is a powerful, repeatable, erasable, writable, programmable single-chip microcomputer voice chip, which is an industrial grade voice chip, meeting the requirements of industrial grade temperature, with high stability and good sound quality. WT588D makes the voice chip no longer look for a suitable peripheral MCU circuit for control mode. The highly integrated MCU technology is sufficient to replace the complex peripheral control circuit. The supporting WT588D VoiceChip host computer operation software can replace any control mode of the WT588D voice microcontroller chip at will, and the information can be downloaded to SPI Flash. The software operation mode is simple and easy to understand, matching the voice combination technology, and greatly reducing the time for voice editing. It supports online download. Even when the WT588D is powered on, you can download information to the associated SPI Flash through the downloader, reset the WT588D voice chip circuit, and update it to the control mode just downloaded. It supports the insert mute mode. The insert mute does not occupy the capacity of SPI Flash memory. One address bit can be inserted for 10ms
Back to top
  • Your name:
  • *
  • corporate name:
  • *
  • Address:
  • *
  • Telephone:
  • *
  • Fax:
  • *
  • E-mail:
  • *
  • Postal Code:
  • *
  • Message subject:
  • *
  • detailed description:
  • *
     
COFCO Fu, No. 90, Dayang Road, Fuyong Street, Bao'an District, Shenzhen
Floor 2/3, Building 6, Robot Intelligent Manufacturing Industrial Park
WT1999@waytronic.com
4008-122-919
  • Mobile Cloud Website
  • WeChat official account
  •  

    Copyright © 2005 - 2016 Shenzhen Weichuang Zhiyin Electronics Co., Ltd

    YGPANB No. 44030602001141