Product Center Products
Recommended products
two thousand and twenty-three - eleven - 07
● Overview WTN6040FP-14S is a high-power voice chip developed by Shenzhen Weichuang Zhiyin Electronics Co., Ltd. Its audio output type is PWM, and it has a built-in class D audio power amplifier circuit, which can directly push a 4W 3W speaker. Its output can work normally without LC filtering. It reduces EMI interference in the full bandwidth range and minimizes the impact on other components. At present, the speech length of WTN6040FP-14S is 40 seconds. The audio sampling rate is currently up to 32kHz, 16 level volume control, PWM output mode. The time of this chip
two thousand and twenty-three - eleven - 07
● Overview WT588F02BP-14S is a high-power voice chip developed by Shenzhen Weichuang Zhiyin Electronics Co., Ltd. Its audio output type is PWM, and it has a built-in class D audio power amplifier circuit, which can directly push a 4W 3W speaker. Its output can work normally without LC filtering. It reduces EMI interference in the full bandwidth range and minimizes the impact on other components. At present, the WT588F02BP-14S can store voice content of 170 seconds at most (if the customer has no requirements for voice quality, it can store voice content of 320 seconds at most). W...
two thousand and twenty-three - 09 - twenty-three
Module introduction: WTK6900HM01 is the recognition speech recognition module of the local speech trigger engine, which has the characteristics of low cost, high reliability and strong versatility. In terms of voice technology, it has achieved high reliable wake-up recognition rate, longer distance wake-up, lower false wake-up rate, richer number of voice control commands, stronger anti noise ability, and faster response recognition time. Module features: ● Core and storage - high-performance 32-bit core, 240MHz main frequency, support hardware floating point operation - built-in 1MB SPI FLASH ●&#
two thousand and twenty-three - 09 - fifteen
Product introduction WT2605C is a powerful high-quality voice chip, which uses a high-performance 32-bit processor and can reach a maximum frequency of 240MHz. It has the characteristics of low cost, low power consumption, high reliability, and strong versatility. The existing WT2605C-32N (small size 4 * 4MM) packaging chip. Customize serial communication protocol standard (AT) instructions. SPI Flash, TF card and USB flash drive are supported as memory. It has the functions of file index play, insert, single track cycle, all track cycle, random play, etc. The 31 level volume is adjustable, and the maximum support is
Test plate/test rack

Multi function test rack

Product features:

have Mode selection of 14 different functions;

Support the detection of various single chip and module keys, 1-wire, 2-wire, 3-wire serial port control modes;

support Detection of capacity and checksum of SPI_FLASH;

When using When DSA communicates with USART, it can also send codes through the USB-RS232 interface for the serial port debugging assistant software;

have WTV020 frequency offset correction timeout detection function;

Scope of application:
Time to market: two thousand and twenty-three - eleven - 07
Product description:
Product description:
Product overview First of all, thank you for being our customer and using our self-developed WT1201P12 multi-function test stand. The test rack is applicable to the connection between various WT series single chips and their modules in the mode of button and serial port control, which can help you get rid of the tedious task of writing and downloading the transmitter program; It is also suitable for checking the capacity and checksum of SPI_FLASH. It can also correct the frequency offset of WTV020, which can provide you with a convenient and fast way. In order to understand the various functions of the product and its use process, please read the instructions carefully first. Product features ☆ Mode selection with 14 different functions; ☆ Support the detection of various single chip and module keys, 1-wire, 2-wire and 3-wire serial port control modes; ☆ Support the detection of capacity and checksum of SPI_FLASH; ☆ When DSA and USART are used for communication, serial port debugging assistant software can send codes through USB-RS232 interface; ☆ It has WTV020 frequency deviation correction timeout detection function; ☆ One button keys with special functions in each module; ☆ Interface with PWM and DAC and its audio output, as well as volume adjustment of DAC; ☆ Various additional rows of needles are reserved for easy expansion; ☆ Size: 129.63mm x 101.62mm; ☆ Working voltage: DC9 - 12V; ☆ Static current: 78 mA;
  • product details

Product Overview

First of all, thank you for being our customer and using our self-developed WT1201P12 multi-function test rack. The test rack is applicable to the connection between various WT series single chips and their modules in the mode of button and serial port control, which can help you get rid of the tedious task of writing and downloading the transmitter program; It is also suitable for checking the capacity and checksum of SPI_FLASH. It can also correct the frequency offset of WTV020, which can provide you with a convenient and fast way.

In order to understand the various functions of the product and its use process, please read the instructions carefully first.

 

Product features

have Mode selection of 14 different functions;

Support the detection of various single chip and module keys, 1-wire, 2-wire, 3-wire serial port control modes;

support Detection of capacity and checksum of SPI_FLASH;

When using When DSA communicates with USART, it can also send codes through the USB-RS232 interface for the serial port debugging assistant software;

have WTV020 frequency offset correction timeout detection function;

One touch keys with special functions in each module;

Self contained PWM, DAC interface and its audio output, as well as DAC volume adjustment;

Various additional rows of needles are reserved for easy expansion;

Size: 129.63mmx101.62mm;

Operating voltage: DC9-12V;

Quiescent current: 78mA;

 

 

Published: two thousand and sixteen - eleven - fourteen
Introduction: The multi-functional test board V1.5 has the characteristics of small size, multiple functions, and integration of downloading and testing. It can be used for WT588D, WTV-S, WTV-SR (WTV-SR needs to add a conversion seat) The writing and testing of voice chips such as WTV-NAND (conversion seat is required) and voice modules are not only voice chip writing seat and voice module writing seat, but also voice chip test rack, voice module test rack, voice chip downloader, voice chip programmer and other multi-functional uses. The WT588D download programmer, which can perform online download, offline download, one copy eight, test and other tasks, is very powerful. It can complete up to one copy eight tasks between modules, modules and Flash, Flash and modules, Flash and Flash. It provides unparalleled efficiency for mass production and is an indispensable programming tool for the application of WT588D mass production. The master chip information is copied into the sub chip faster than other downloaders, and the copy information is accurate. It has separate reset, erase, programming, verification functions, as well as the "self copy" one key operation function. The advanced offline download function reflects the convenience of the WT588D one copy eight programmer. The WT588D one copy eight programmer not only has powerful functions in copying, but also has the same excellent test functions as the WT588D multi-function test rack V1.5. Meet various test requirements. Detailed instructions for use can be obtained from online customer service. Features and advantages can be obtained from online customer service: ☆ Multi function test board download operation: after the engineering documents are compiled into BIN files on the upper computer WT588D VioceChip software, the WT588D module and WT588D external SPI Flash (need to be used with the conversion seat) are placed on the bottom of the locking seat, The WTW16P and WTW28P in the WT588D module only need to be placed against the bottom (the notch is against the rocker of the locking seat), and then the project information can be downloaded to the WT588D module or relevant SPI Flash through the USB data cable. When downloading, the USB port directly supplies power to the download board without plugging in the DC9V power supply. From the computer, use WT588D VoiceChip software to edit voice, control mode and trigger mode, and then click Download to download project information to WT588D module and external SP
Published: two thousand and sixteen - eleven - fourteen
Features and advantages: ☆ Support offline download program; ☆ Support burning WTV040/080/170/340, WTV-S, WTW-16P, and WTW28P; ☆ Support empty check, burning, calibration and other operations; ☆ LED indication of working status; ☆ 232 serial communication; ☆ Single power supply. ☆ Working voltage: DC5V ~ 12V ☆ Working current: 45mA Application examples can be used for engineering burning and testing of WTV series products.
Published: two thousand and sixteen - eleven - fourteen
Product overview First of all, thank you for being our customer and using our self-developed WT1201P12 multi-function test stand. The test rack is applicable to the connection between various WT series single chips and their modules in the mode of button and serial port control, which can help you get rid of the tedious task of writing and downloading the transmitter program; It is also suitable for checking the capacity and checksum of SPI_FLASH. It can also correct the frequency offset of WTV020, which can provide you with a convenient and fast way. In order to understand the various functions of the product and its use process, please read the instructions carefully first. Product features ☆ Mode selection with 14 different functions; ☆ Support the detection of various single chip and module keys, 1-wire, 2-wire and 3-wire serial port control modes; ☆ Support the detection of capacity and checksum of SPI_FLASH; ☆ When DSA and USART are used for communication, serial port debugging assistant software can send codes through USB-RS232 interface; ☆ It has WTV020 frequency deviation correction timeout detection function; ☆ One button keys with special functions in each module; ☆ Interface with PWM and DAC and its audio output, as well as volume adjustment of DAC; ☆ Various additional rows of needles are reserved for easy expansion; ☆ Size: 129.63mm x 101.62mm; ☆ Working voltage: DC9 - 12V; ☆ Static current: 78 mA;
Hot Products / Related products More
two thousand and seventeen - 06 - ten
Overview: (This product has been discontinued, and there are other new upgraded products with the same function, you can consult our customer service) WTV series voice chips are a series of voice chips launched by Shenzhen Weichuang Zhiyin Electronics Co., Ltd., with superior performance and affordable price, which can provide users with higher cost performance. This series of chips includes WTV010, WTV020, WTV040, WTV080, WTV170, WTV340 and other voice chips. In terms of functions, WTV010, WTV020 and WTV040 have the same functions as WTV040, WTV080, WTV170, WTV340 and other voice chips. This instruction only introduces the relevant information of WTV040, WTV080, WTV170, WTV340 and other voice chips. The voice programming software matched with WTV series voice chips has simple operation interface, easy operation and complete functions. Making full use of the internal resources of the chip can greatly shorten the production cycle of the chip. This chip has many unit circuits, and has strong programmable ability. In addition to playing voice, it can also play MIDI music. It can not only achieve standard control mode, but also customize various functions according to needs, so as to improve the cost performance of the product as much as possible
two thousand and sixteen - eleven - fourteen
Overview (This product has been discontinued, and there are other new upgraded products with the same function, which can be consulted by our customer service) WTV040 voice chip has many unit circuits, and has strong programmable ability. In addition to playing voice, it can also play MIDI music, which can not only achieve standard control mode, but also customize various functions according to needs, Try to improve the cost performance of the product to a higher level. It can also control various electrical equipment, and can be used in many fields, such as electronic piano, toys, children's learning machines, anti-theft equipment, smart home appliances, health care and physiotherapy products, instruments, and various automatic control systems. Among many products that require high sound quality and flexible functions, WTV040A-16S voice chip is one of the more cost-effective solutions, and it is also a better choice to replace ISD series voice chips in some occasions! Function description: ☆ Programmable OTP voice chip. ☆ When the frequency is 6KHZ, the voice length can reach 40 seconds according to the chip model. ☆ Built in 16bits DAC digital/analog converter, PSG voice synthesizer and sound quality optimization algorithm, which can show relatively high quality audio. ☆ PWM and DAC
two thousand and sixteen - eleven - fourteen
Overview (This product has been discontinued, and there are other new upgraded products with the same function, you can consult our customer service) WTV020 series voice chips include WT5010, WTV020 and WT5040, whose voice time is 10 seconds, 20 seconds and 40 seconds respectively. WTV020 series voice chip is a powerful one-time programmable voice chip. The optional control modes include key control mode, parallel port control mode, serial port control mode, etc. The trigger mode of key control mode is flexible; In the serial port mode, the volume can be controlled, the power amplifier can be turned on or off, and the functions of loop play and stop are available. WTV020 series chips have built-in 16 bit DAC audio processing core, built-in internal filter power amplifier, which can directly drive 0.5W speakers, built-in PSG programmable speech synthesis technology, which truly has the characteristics of high sound quality and low noise. The audio output is in PWM or DAC mode. The professional voice programming software matched with WTV020 series voice chips has simple operation interface, easy operation and complete functions. Making full use of the internal resources of the chip can greatly shorten the production cycle of the chip. This chip has many unit circuits and strong programmable ability, which can not only realize the standard controller
Back to top
  • Your name:
  • *
  • corporate name:
  • *
  • Address:
  • *
  • Telephone:
  • *
  • Fax:
  • *
  • E-mail:
  • *
  • Postal Code:
  • *
  • Message subject:
  • *
  • detailed description:
  • *
     
COFCO Fu, No. 90, Dayang Road, Fuyong Street, Bao'an District, Shenzhen
Floor 2/3, Building 6, Robot Intelligent Manufacturing Industrial Park
WT1999@waytronic.com
4008-122-919
  • Mobile Cloud Website
  • WeChat official account
  •  

    Copyright © 2005 - 2016 Shenzhen Weichuang Zhiyin Electronics Co., Ltd

    YGPANB No. 44030602001141