Ball valve
Alternative name: lining ball valve lining PTFE ball valve
Model: Q41F46-16
Introduction to fluorine lined ball valve:
Fluorine lined ball valve and plug valve belong to the same type of valve, but the difference is that the fluorine lined ball valve uses a round through ball as the opening and closing part, and the ball rotates around the center line of the valve body with the valve stem to realize the purpose of opening and closing the valve, The inner cavity of the fluorine lined ball valve is in contact with the medium. It is lined with F46 plastic, which has extremely strong corrosion resistance. It is applicable to the temperature of - 40-120 ℃, and can be used to transport the acid, alkali, and salt liquid medium pipelines with concentration. The product has the advantages of long service life, no aging, no toxin decomposition, etc. At the same time, it has the strength protection of the carbon steel shell, and the corrosion resistance of the fluorine lined material. It is a chemical, rubber It is an ideal choice for many industries such as plastic, pharmaceutical, papermaking, electroplating, smelting, water treatment, etc.
![Fluorine lined ball valve_lined ball valve_lined PTFE valve Fluorine lined ball valve_lined ball valve_lined PTFE valve](/uploads/1909/1-1Z9211G9155S.jpg)
Technical parameters of PTFE lined ball valve:
Product specification | DN15~DN200 |
Design Criteria | GB/T 12237 |
Inspection test | JB/T9092-99 |
Electric spark inspection standard | HG/T 3704 |
Structure length | GB/T 12224 |
Manufacturing standard | GB/T 12237 |
Fluorine lined ball valve is also called lining ball valve lining tetrafluoro ball valve. It adopts the method of inner lining fluoroplastic to insert the corrosion-resistant material F46 into the valve body, so as to ensure that the parts in contact with various strong corrosive media are fluoroplastic, separating the corrosive media from the valve body materials. As F46 plastic is relatively soft, the pressure it can bear is also limited. It is not recommended to use fluorine lined valves when the service pressure of pipeline medium is higher than PN1.6MPa,
Precautions:
1. The plastic cover plate at the flange cannot be removed at will unless it is ready for installation and connection with the pipeline to prevent the PTFE flange surface from being scratched or distorted due to temperature difference and foreign matters, which may affect the sealing.
2. When the corrosion resistant valve is connected with the pipeline, the gasket is no longer used, but when connecting with the flange surface of different materials (metal surface, etc.), the appropriate gasket is used to protect the fluorine lining surface.
3. It is not allowed to do any high-temperature welding work on fluorine lined valves and pipe fittings, so as to avoid damage to the lining layer, resulting in valve sealing deformation and leakage.
Related products: Ball Valve pneumatic valve Stainless steel ball valve