What should be paid attention to when installing the electric ball valve?
Time: 2021-08-20 12:20:10 Source: Yonglong Valve Reading: zero second
At present, Shanghai Yonglong Valve Factory Ball Valve The quality problem of has become a topic of discussion. The electric ball valve with powerful performance is not easy to be damaged due to the blockage of gas buffer during operation, so the flow can be adjusted to a large extent without taking additional explosion-proof measures. The electric ball valve was praised by after-sales service during installation, and the following points should be noted:
First, pay attention to the specifications of the equipment
Before installing the electric ball valve, the operator should pay attention to check whether the control valve meets the installation specifications, especially the size, materials and accessories. In addition, the operator should properly protect the electric ball valve to prevent sun and rain. Humidity is easy to cause valve corrosion. Therefore, the electric ball valve should be installed in a dry environment without environmental interference, so it is an outdoor electric control valve.
Second: Pay attention to the cleaning of pipes
Ball Valve During installation, the operator should pay attention to whether there are foreign matters in the valve body. Foreign matters in the pipeline may damage the sealing surface of the valve, or even hinder the movement of the valve core, ball valve and butterfly plate, resulting in the valve not being closed correctly. Therefore, in order to ensure the stable operation of the electric ball valve, the operator needs to clean the pipeline before installing the electric ball valve.
Third: Pay attention to the convenience of maintenance
When installing the powerful electric ball valve, the operator should leave enough space for subsequent inspection and maintenance of the actuator and valve core. In addition, for the flanged electric ball valve, the operator shall ensure that the flange surface can be evenly contacted. In addition, for the control valve equipped with electric ball valve positioner and hand wheel, there must be a space for convenient operation, observation and adjustment.
Moreover, it can be seen from the analysis of the electric ball valve service manufacturer that in the process of installing the full function electric ball valve, additional pressure should be avoided as far as possible, and in the process of installing the electric ball valve, tilt should be avoided as far as possible. In short, install the applicable Ball Valve Attention shall be paid to the key points such as specification, channel cleaning and convenient system maintenance. (CNPV)
[Recommended reading] / TECHNICAL ARTICLES