D371X-16 Soft Seal Wafer Turbine Butterfly Valve
Overview of wafer butterfly valve:
D371X-16 soft seal wafer type turbine butterfly valve is simple in structure, small in size, light in weight, and composed of only a few parts. The valve can be quickly opened and closed only by rotating 90 °, which is simple to operate. At the same time, the valve has good fluid control characteristics. The turbine wafer butterfly valve is designed with a single eccentric structure, which is different from the neutral line soft seal. After the butterfly plate rotates about 20 degrees, the valve seat and the seal ring quickly separate, thus reducing friction. Use stud bolts to connect the valve between the two pipe flanges, and use bolts to connect the flanges on both ends of the valve to the pipe flanges.
When the D371X-16 turbine soft seal butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. The sealing specific pressure is generated by the elasticity of the valve seat or valve plate when the valve plate squeezes the valve seat when the valve is closed.
Material table of main parts of soft seal butterfly valve:
1. Valve body: gray cast iron, nodular cast iron, cast steel, stainless steel, etc
2. Butterfly plate: CI, DI, WCB, stainless steel
3. Sealing ring: rubber, cast steel, alloy steel, stainless steel
4. Valve rod: 2Cr13, stainless steel
5. Packing: O-ring, flexible graphite
6. Turbine: carbon steel
Sealing valve seat material and service temperature of turbine butterfly valve:
1. Neoprene (X, ORJ): - 40 ℃~+82 ℃, applicable working temperature: ≤ 65 ℃
2. NBR (XA, ORJA): - 40 ℃~+93 ℃, applicable working temperature: ≤ 80 ℃
3. Ethylene propylene rubber (XB, ORJB): - 40 ℃~+150 ℃, applicable working temperature: ≤ 120 ℃
4. Polytetrafluoroethylene (XC, JC, OR F): - 268 ℃~+200 ℃, applicable working temperature: ≤ 150 ℃
5. Silicone rubber (XD, OR JD): - 70 ℃~+250 ℃, applicable working temperature: ≤ 200 ℃
6. Viton: (XE, OR JE): - 23 ℃~+204 ℃, applicable working temperature: ≤ 180 ℃
D371X-16 wafer turbine soft seal butterfly valve has a long service life compared with other valves, and can achieve two-way sealing without leakage. The flow characteristics tend to be straight and the regulation performance is good. The turbine butterfly valve has a wide range of applications, and can be used as a device for cutting off and regulating flow in different medium pipelines. The working temperature is suitable for below 120 ℃. It has been used in petrochemical industry, paper making, energy exploitation, power plant, food industry, water supply and drainage engineering, mechanical equipment supporting, electronic industry, urban construction, water treatment, oil products and other fields.