-
2024-09-24 Methods of pph tube zigzag processing It also has impact strength at low temperature, which increases hydrostatic strength and chemical resistance. PPH pipes shall be protected from long-term sunlight as far as possible, and PPH pipes without grooves shall be protected from direct sunlight during construction to prevent thermal deformation. When PPH pipes are stored, handled and transported, they should be loaded and unloaded with belts, slings or slings. There should be at least two nodes when lifting. Read more -
2024-09-20 The tensile deformation of the outside of pp pipe is large When metal clamps and hangers are used for pp pipes, soft material gaskets shall be used between the metal clamps and pipes. Pp tube The welding and cooling process is the same as that of socket welding. Connect the outer surface of the pipe with the inner surface of the pipe, place the surface in the mold of the welding machine at the same time without rotation and heat it for a few seconds, then quickly take out the welding machine, put the heating pipe into the pipe fittings quickly and vertically, and carry out the connection process of pressure maintaining cooling. Read more -
2024-08-29 Main materials and application effect of frpp pipe When extruding the frpp tube, the screw is driven by the motor through the gear wheel box to rotate. The rotating screw takes materials from the feeding port, usually loose flake, powder, and granular solid cold materials, Frpp pipe The composition of the extrusion auxiliary machine is determined according to the type of products. The auxiliary machine is composed of the head, the shaping device, the cooling device, the traction device, the cutting device and the coiling or stacking device of products. Read more -
2024-07-24 PP air duct is easy to become brittle at low temperature PP air duct has good electrical performance and high-frequency insulation, and can be used normally in humid environment without being affected by the environment. PP air duct It can be used at about 100 ℃, and has good electrical performance and high-frequency insulation, which is not affected by humidity. However, it is easy to become brittle at low temperature, is not wear-resistant and easy to age, and is suitable for making general mechanical parts, corrosion resistant parts and insulating parts. Read more