2. Assist the quality engineer to analyze, improve and follow up the quality problems on site;

3. Input, count and maintain daily quality data;

4. Assist the quality engineer to complete the unconventional test and form the test report;

5. Manage and maintain quality equipment, and be responsible for relevant reliability testing;

6. Provide technical support for inspectors, and carry out regular training to improve their working ability;

7. Assist in following up customer inspection and after-sales

1. Maintain various systems and standards related to the quality team of the enterprise's quality management process and supervise their implementation;

2. Implement various management systems of the enterprise, and implement quality objectives;

3. Participate in the formulation of control objectives related to yield, monitor and measure the objectives, propose improvement opportunities, and follow up the improvement results;

4. Monitor and measure the improvement measures to improve the yield, and follow up the improvement results;

5. Be responsible for investigating and analyzing quality accidents and putting forward handling suggestions; Organize the formulation of quality improvement plan and guide and monitor the implementation of the plan;

6. Be responsible for the reporting, statistics, analysis and management of quality related information, and effective monitoring, measurement, analysis and improvement of products;

7. Participate in customer complaint investigation, audit customer complaint problems, and reduce customer complaints; Audit and monitor the control points in the production process of finished products;

8. Supervise and inspect the implementation of process discipline to promote continuous improvement. Ensure that the product quality conforms to

2. Participate in the preparation of various technical documents and operation instructions of the company.  

3. Be responsible for the periodic verification or calibration of measuring instruments and various testing equipment.

4. Implement product audit, process audit and internal audit as planned.

5. Assist in handling customer complaints and relevant quality information feedback, and prepare the analysis report of the company's quality status.

6. Be responsible for the planning, supervision, inspection, review and improvement of the department's quality work.

7. Be responsible for handling nonconforming products within their own authority, and inspecting and verifying the implementation effect of corrective, preventive and improvement measures.

8. Be responsible for applying the specified statistical techniques for data analysis.

9. Be responsible for reporting suggestions to the direct superior as required.

10. Assist the superior to use the quality system management tools to verify the suitability and sufficiency of the system

2. Participate in quality analysis, prepare quality control plan, design quality control card and determine quality control points;

3. Determine control procedures and necessary tooling to ensure the control of process quality and final inspection;

4. Coordinate relevant departments to analyze quality problems and supervise the implementation and effect of improvement measures

5. Continuously monitor the progress of all quality objectives and implement necessary improvement measures;

6. Responsible for the maintenance and control of product related quality documents and records.

7. C1 driver's license is preferred

2. Organize and hold quality analysis meeting, find out the cause of the problem, and develop temporary measures and permanent plans

3. Responsible for coordinating the production department to complete the quality control in the production process;

4. Reasonably specify the process of product testing and the setting of testing sites;

5. Timely communicate with customers after quality problems occur at the client, reduce customer complaints, and timely prepare relevant analysis reports (one page report or 8D report, etc.) according to customer requirements

6. Responsible for auditing suppliers with relevant departments, issuing reports and proposing improvement suggestions.

7. Sort out the list of open quality problems of suppliers, take the lead to rectify and close the quality problems of suppliers, and regularly conduct product audit or process audit on suppliers

Supplementary notes:

1. More than two years of quality management experience in the automotive industry; Proficiency in using 5 quality tools

1. Planning of product quality and establishment of control plan in the early stage of new product introduction.

2. Monitor the manufacturing process (process) of mass production products to ensure that the product quality is within the required range.

3. Solve the quality abnormalities in the production process and continuously improve the yield of product quality.

4. Establish the quality anomaly prevention and control plan and regularly hold leading quality meetings.

5. Promote all staff to participate in continuous quality improvement activities and enhance their quality awareness.

6. Be responsible for improving team morale and skills, formulating, implementing and assessing quality training plans.

7. Cooperate with the implementation of IATF16949, ISO9001, ISO14001, QC080000 systems and

1. Evaluate the integrity of relevant data when the new project is transferred to mass production, formulate and regularly optimize the inspection standards at the mass production stage, and do a good job in personnel training;

2. Analyze the fabric quality problems caused by abnormal process quality, and supervise the implementation and effect of improvement measures;

3. Track the quality problems in the double track stage to ensure that the problems can be solved in time to meet customer requirements;

4. Do a good job of cross department communication, and follow up the key quality problems of the project on a weekly and monthly basis;

5. Regularly collect and sort out quality data feedback information, organize analysis and improvement of typical and TOP problems, and prepare weekly and monthly quality reports;

6. Carry out regular process audit and update and maintain relevant quality control documents.

Job requirements:

1. Mechanical, electronic and electrical related majors;

2. More than one year of process quality experience;

3. Familiar with Microsoft series office software, 8D

Requirements 1. College degree, more than 2 years of chassis parts quality related work experience; 2. Have a strong quality awareness and be proficient in using OFFICE office software; 3. Be able to read CAD drawings and master the use and maintenance of measuring tools; 4. Understand the relevant standards and requirements of the quality management system; 5. Good at learning, good communication ability and problem solving ability, team spirit, strong execution and sense of responsibility.

1. Responsible for formulating product inspection and judgment standards, and responsible for the analysis and judgment of quality abnormalities.

2. Be responsible for quality customer complaint management.

3. Be responsible for the statistics, summary and analysis of quality related data.

Job requirements:

1. Be familiar with the key points of process control, process flow, industry quality standards and basic knowledge of quality system.

2. Be familiar with the 8D report and the use of five tools.

3. Proficiently use office software and icon PPT production.

Other requirements:

1. Strong communication and coordination ability, careful, strong pressure resistance and execution ability.

2. Be familiar with and master SMT related process capability.

2. Have QE work experience and C1 driver's license.

Those who meet the requirements can directly submit their resumes to liuchunli@cquni.com

2. Responsible for product quality control in the whole production process from samples to mass production, and seeking customs clearance test, control and improvement processes to improve product quality.

3. Be responsible for solving the quality problems in the production process, handling quality abnormalities and quality improvement.

4. Follow up the quality of products, handle customer complaints and provide improvement measures.

5. Guide supplier to improve quality, analyze and improve defective parts.

6. Be able to skillfully use professional and office software such as CAD.

7. Be responsible for the final approval of design drawings, and provide design drawings to the Design Department on time.

8. Be responsible for the establishment and certification of various system data.

9. Other matters assigned by leaders.

1. Be responsible for the quality management of the production process, timely deal with the process problems related to product quality, and organize the analysis and handling of quality problems;

2. Supervise and coordinate the progress of each department in solving quality problems;

3. Use statistical technology to collect, count, analyze and feed back on-site quality problems;

4. Responsible for writing and maintaining the product archives and quality standards of consumer harnesses;

5. Investigate the causes of customer complaints and develop corrective and preventive measures;

6. Follow up the quality assessment of new products, participate in the process improvement of new products, and track the trial site of new products for customers.

Job requirements:

1. College degree or above, more than three years of relevant work experience in quality work, familiar with QE workflow;

2. Objective and rigorous work, strong sense of responsibility, team spirit;

3. Be familiar with the requirements of quality management system, and be able to skillfully use quality tools, such as QCC, 8D, PPAP, etc.

2. On site patrol inspection to prevent quality accidents, solve on-site quality problems, participate in the investigation of quality accidents and prepare analysis reports;

3. Participate in product defect and fault analysis and follow up;

4. Be responsible for organizing and implementing training on the knowledge of the company's quality management system;

5. Assist the relevant departments of the company to formulate the company's product quality standards;

6. Be able to provide more than 3 years of quality management experience and resignation certificate in pharmaceutical companies;

7. Assist to complete other work assigned by leaders.

Supplementary notes:

1. Hold a licensed Chinese pharmacist certificate, major in Chinese pharmacy (pharmacy), college degree or above,;

2. Diligent, active, down-to-earth, strong working motivation, and strong learning ability;

3. The treatment is negotiable.

1. Technical secondary school degree or above, including electrical engineering and its automation/mechatronics/mechanical design and manufacturing and its automation/electronic information engineering/electrical automation/urban rail transit vehicles/communication signal specialty is preferred

job content:

1. Carry out daily patrol inspection and special inspection in strict accordance with relevant standards and process documents of the depot,

2. Feed back the quality of the depot,

3. Sort and file daily test records

4. Have good communication skills, and can skillfully use office software

5. Have strong ability to express in words and be able to use relevant testing instruments.

Work address: Tangjiatuo Depot/Shichuan Depot.

Working hours: 9:00 to 6:00, Monday to Friday

1. Be responsible for the quality management of the production process, timely deal with the process problems related to product quality, and organize the analysis and handling of quality problems;

2. Supervise and coordinate the progress of each department in solving quality problems;

3. Use statistical technology to collect, count, analyze and feed back on-site quality problems;

4. Responsible for writing and maintaining product archives and quality standards;

5. Investigate the causes of customer complaints and develop corrective and preventive measures;

6. Follow up the quality assessment of new products, participate in the process improvement of new products, and track the trial site of new products for customers.

Job requirements:

1. More than 2 years of relevant work experience, familiar with the quality management process;

2. Objective and rigorous work, strong sense of responsibility, team spirit;

3. Be familiar with the requirements of quality management system, and be able to skillfully use quality tools. E.g. 8d, etc

② Familiar with aluminum alloy die casting+machining production process

③ Have the ability to analyze quality problems and formulate solutions as a whole;

④ Strong team spirit and learning ability;

⑤ Proficient in using UG CAD EXCEL office software.

1. Be responsible for the quality management of the production process, timely deal with the process problems related to product quality, and organize the analysis and handling of quality problems;

2. Supervise and coordinate the progress of each department in solving quality problems;

3. Collect, count, analyze and feed back on-site quality problems;

4. Collect and sort out the past quality problems, form a list of problems that should be avoided, and input it into the new project to avoid problems from happening again

5. Investigate the causes of customer complaints and develop corrective and preventive measures;

6. Follow up the quality assessment of new products, participate in the process improvement of new products, and track the trial site of new products for customers.

Job requirements:

1. College degree or above;

2. More than 3 years of relevant quality management work in manufacturing enterprises;

3. Strong execution ability, coordination ability and logical thinking ability;

4. Be familiar with 2D and 3D drawing software, office software and ISO/TS16949;

...

1. Responsible for handling customer complaints and making reports of new customer products;

2. Responsible for the arrangement of client rework and customer returned products;

3. Customer relationship maintenance;

4. Process audit and product audit;

5. Customer quality daily/weekly/monthly report preparation;

6. Customer audit correspondence;

7. Line review at new product stage;

8. SIP production for product inspection;

9. Quality project production;

10. Quality standard training, abnormal product judgment and meeting participation.

Job requirements:

1. About 1 year of quality work experience in the electronics industry, with experience in photoelectric industry preferred;

2. Must have some experience in external customer communication, customer service/overseas work experience is preferred;

3. Be proficient in 8D thinking, be able to flexibly use quality tools, minitab, SPC and other tools, and have a certain understanding of the quality system;

4. Be down-to-earth and serious with active thinking;

5....

2. Organize the implementation of laws, regulations and rules at all levels, as well as the instructions, resolutions and rules of the superior. Formulate and implement various rules and regulations in line with the actual situation of the department.

3. Organize the quality control of incoming cement production process products, do a good job in cement batching, optimize cement control parameters, improve product quality and reduce costs; Do a good job in basic maintenance of equipment and industrial facilities to ensure their integrity and normal operation.

4. Supervise subordinate employees to complete safety indicators, comply with various safety rules and regulations, stop and correct unsafe behaviors of employees, and put forward corresponding suggestions;

5. Responsible for the safety, production, technical and administrative work of the department

1. Be responsible for the quality control of new project development, identify quality risks and problems, and rectify and avoid them in advance;

2. Be responsible for tracking product trial production, putting forward risk points and problem points, and forming a list of problems;

3. Respond to customer quality problem reports

4. Responsible for patrol inspection

5. Complete other tasks assigned by leaders.

Job requirements:

1. No educational background is required, but they need to be self-motivated, have career plans for themselves, and are willing to work hard in the quality industry;

2. Strong communication and coordination ability;

3. Responsible;

4. Have a learning plan for the five tools

2. Be familiar with the quality system IATF16949, five tools, 8D, QC techniques, APQP, etc., and be proficient in office software;

3. Strong communication ability, pressure resistance ability and problem analysis ability.

4. Qualification certificate for measuring tool adjustment is preferred.

operating duty:

1. Establish quality control system, effectively implement inspection, and ensure the reliability, accuracy and effectiveness of inspection data in the production process.

2. Assist the company to set up quality control points, and supervise and inspect the work of quality control points.

3. Supervise whether the production process operators and inspectors follow the process procedures and inspection procedures.

4. Organize the company's internal audit regularly and in a planned way, meet the two party and three party audits, ensure the normal operation of the company's quality system, timely rectify problems found, and track the rectification effect of problems.

5. Timely feed back internal and external quality information, and make statistics of all kinds of defective products