Job requirements: semiconductor silica gel.

1. Technical secondary school/senior high school (inclusive) or above, with CNC operating experience, CNC machine tools, machining centers, lathes, etc.

Time: early long day shift, two days off in the morning, 8.30-20.30, late two shifts, four days off in the morning.

Salary: comprehensive monthly salary: 4-5.5K/month. 1.5 times on weekends and three times on holidays!!

Treatment: buy five insurances and one fund (12% of provident fund) when you start work, including three meals and accommodation (four bedrooms, upper berth sleeping and lower berth desk). There is a factory car for pickup (currently it is a taxi for reimbursement).

Other benefits: paid annual leave, group construction, festivals, birthdays, wedding gifts, funeral condolences, etc.

Other benefits: holiday gifts, birthday gifts, wedding gifts, funeral condolence. Paid vacation, commuter bus, group building activities

Job requirements:

1. More than 8 years of relevant design experience;

2. Working experience in machinery industry and injection mold industry is preferred;

3. Must be able to draw SOLIDWORKS;

4. Team work spirit and continuous learning ability.

job content:

1. Have the development intention, the spirit of the manager, promote in a short time, and be responsible for the operation, management and development of the department;

2. Responsible for formulating, cultivating and managing the development direction of the team, and achieving the company's planned tasks;

3. Responsible for team performance tracking and feedback, regular employee interviews, employee career planning, etc.

Job requirements:

1. 25-45 years old, college degree or above;

2. Good communication and management skills;

3. Work conscientiously and responsibly, have a sense of collective honor and strong sense of responsibility;

4. No bad habits and criminal records.

5. Meet the standard minimum salary 1w

working hours:

Monday to Friday 8:30-17:00

1. Familiar with mechanical design software SolidWorks, AutoCAD, etc., and the ability of finite element fluid analysis is preferred;

2. Solid foundation of mechanical knowledge, familiar with: common material selection, machining process, standards, etc. of industrial valves;

3. Experience in industrial valve and fluid machinery project development is preferred;

4. Proactive and meticulous work, strong sense of responsibility, innovation, learning ability, and good team spirit;

Qualifications:

1. Design and development post, major in mechanical design and manufacturing, full-time bachelor degree or above; (Hard requirements)

2. At least three years of mechanical equipment design experience, under the age of 35, the excellent can be appropriately relaxed;

3. The company will provide sufficient development space for employees after they are qualified for employment and probation;

4. At present, the salary level of our company is between E1-E16. The specific salary level is determined according to the interview and relevant certificates.

1. Break down and communicate the sales target issued by the company;

2. Lead department staff to complete customer development and achieve sales goals;

3. To guide, train, motivate and assess the staff of the department;

4. Supervise the department staff to complete the sales collection;

5. Other work arranged by superior leaders.

Job requirements:

1. Age 25-45, college degree or above, major in real estate, finance, medical and other related fields;

2. More than 3 years of experience in marketing supervisor, experience in real estate and financial industry is preferred;

3. Have rich marketing knowledge, know about market research and market forecast, and be able to evaluate the market development trend;

4. Master team building, personnel management and other knowledge, have good communication skills and team spirit.

2. Be familiar with the design of precision mechanical parts such as mechanical fixtures;

Job requirements:

1. College degree or above, major in mechanical and electrical engineering;

2. Be familiar with and apply more than one 3D mapping software;

3. Earnestly responsible, rigorous and meticulous, with good team spirit and communication ability;

2. Skilled in making DFM analysis report, communicating with customers about changes and modifications, and reasonable mold structure design.

3. Be able to modify the mold data according to the mold sample, size inspection report or customer design changes.

4. It is better to have mold flow analysis ability and make mold related documents.

5. Be capable of salary interview.

Good car route; Building 5, No. 66, Tonggui Third Road, Yufengshan Town, Yubei District, Chongqing

1. Technical secondary school degree or above, major in machinery;

2. 1-2 years of work experience, accept fresh graduates (23rd and earlier);

3. Organic processing experience is preferred.

Job responsibilities:

1. Be responsible for the production of semiconductor material machining process section;

2. Complete the production tasks according to the production task list and operation instructions;

3. The maintenance and daily cleaning of equipment and tools shall be completed on time;

4. Maintenance of daily point inspection records, consumable replacement records and processing records;

6. Find and feed back the problems existing in the production process, track and record the problems until they are closed.

2. Hardworking, with driver's license, able to drive independently;

3. This post is the company's overseas post, and the working place is in Chang'an Company.

1. Responsible for all advanced process development of some products.               

2. Responsible for tracking, analyzing and rectifying some problems in advance.            

3. Handle customer feedback information and problems in the production process, implement corrective measures, track improvement and verify.                         

4. Be responsible for continuous optimization of on-site process and continuous update of production line capacity and labor price.

5. After copying the previous product quantity, continue to improve the product process and analyze and rectify the problems.

Qualifications:

1. College degree or above, major: mechanical manufacturing, electromechanical integration and other engineering majors are preferred.

2. Have more than five years of equipment process work experience, and more than two years of the same position.

3. Be familiar with the knowledge and advanced management concept of production site management.

4. Have good communication and coordination ability.

1. College degree or above, major in mechanical design and manufacturing, more than 3 years of working experience or excellent fresh graduates;

2. Under 35 years old, physically and mentally healthy;

3. Proficiently master 3D drawing software UG or Solidworks or Pro/E, 2D drawing software AutoCAD or CAXA, etc., carry out structure and assembly design of mechanical parts, and be able to draw;

4. Have a certain understanding of various machining processes and electrical automation control;

5. Good team work spirit, good pressure resistance and excellent execution ability;

6. Experience in non-standard automation related project design is preferred;

Job description

1. Responsible for the scheme design of non-standard projects;

2. Responsible for 3D modeling of mechanical structure of non-standard equipment and outputting 2D design drawings;

3. Responsible for outsourcing processing of mechanical parts, tracking the processing progress and quality control;

4. Responsible for editing

Salary: 3000 - 5000/month

Location: Yubei District

Work experience: more than one year

Working hours: 9:00 a.m. - 7:00 p.m

Three days off per month

Job responsibilities:

1. Car repair, daily work arrangement and guidance

2. Carry out production operations as required, judge common faults of cars, and skillfully disassemble and assemble parts

3. Hardworking and responsible

2. Be responsible for the production and inspection of the first product, supervise the production process, and complete the customer sample delivery;

3. Complete the quotation, development and management of new products;

4. Complete the company's product process, tooling design and process document preparation;

5. Complete the design and improvement of the tooling (clamps, knives, auxiliary tools and inspection tools) of each product, put forward the list and technical requirements to ensure the implementation of the management system in the work of the Technology Department, and conduct regular internal audit;

6. Assist the production site team leader and commissioning personnel to complete the machine commissioning;

7. Assist the Sales Department to solve customer technical problems and provide good customer service;

8. Complete other tasks assigned by leaders.

Job requirements: 1. Large

1. Responsible for telephone contact, development, establishment, maintenance and management of customer resources;

2. Deeply explore customer needs and recommend the company's products and services to customers;

3. Timely communicate with customers, do a good job of information feedback and customer follow-up support services;

4. Be fully familiar with the business workflow, and help customers solve problems in the process of using the company's products;

5. Achieve the company's sales goals and ensure the smooth completion of the team's tasks.

The position is located in Wuli Store, Jiangbei, the main urban area. Welcome to join us. The salary is high, the benefits are good, and the job is easy

Job requirements:

1. I am optimistic about the insurance industry and have the idea of using it as a work skill;

2. Strong sense of service and responsibility;

3. Good ability to deal with emergencies.

fringe benefits:

1. High returns: base salary plus commission, unlimited salary, more pay for more work;

2. Fair promotion mechanism: give everyone

Coating workshop production, product quality, 6S management, process management, cost management

job content:

1. Be responsible for the normal production of products, commissioning and maintenance of processes;

2. Be responsible for making relevant records of all proofing products truthfully;

3. Quality control of the products produced in the workshop, and control the one-time coating qualification rate of the products;

4. Be responsible for all work related to oil adjustment, programming and process adjustment; (6S on site)

5. Train operators according to painting and ABB safety operation regulations;

6. Check the effectiveness of the documents and records used by the workshop at any time;

7. Implement the verbal arrangements made by the technical director (company leader);

1. Part No. application and BOM establishment, packaging material design

2. Product 2D drawing arrangement and release

3. The DFM review and evaluation report of the mold assist in the production

4. Pilot production leading, product design maturity verification execution

5. ECN product design change implementation in the factory after receiving EC notice

6. Review with customers' specifications, formulate new specifications, and implement design changes

7. SOP preparation and import,

8. Assist in the improvement of production process problems of mass production models and capacity improvement

9. Actively deal with the analysis of the defective products of the accepted models and the introduction of improvement measures,

10. Production of PPAP data

11. Recognition of auxiliary materials, evaluation and import of automatic auxiliary material design

12. Complete other tasks assigned by the superior

1. Read and understand engineering drawings, technical specifications and relevant documents to ensure accurate understanding and implementation of requirements;

2. Use sheet metal processing equipment, such as shearing machine, bending machine, punch, etc., to process metal sheets into various shapes and sizes;

3. Fabricate and assemble parts, components or finished products, check the quality before completion, and make necessary repairs and adjustments;

4. Operate welding equipment to connect and repair metal materials, such as electric arc welding, argon arc welding, laser welding, etc;

5. Use measuring tools and instruments, such as calipers, gauges, thickness gauges, etc., to conduct size and quality inspection and ensure that the products meet the requirements;

6. Observe and implement the relevant safety regulations and operating procedures, ensure the safety of the working environment, and use personal protective equipment.

Job requirements:

1. Be familiar with the disassembly, unfolding and processing characteristics of sheet metal parts;

2. Be familiar with relevant knowledge of mechanical manufacturing process;

3. Familiar with sheet metal

2. Strictly implement the process procedures and safety operation procedures.

3. Timely maintain equipment, tooling and measuring tools to keep them in good performance.

4. Be responsible for the quality of the products produced and the maintenance and operation of the equipment operated.

Supplementary notes:

1. Junior high school or above, conscientious and responsible;

2. Have more than 3 years of experience in sheet metal parts production, be familiar with sheet metal parts production process, and be able to skillfully make sheet metal parts according to drawings.

1. Responsible for the introduction of new products and solving problems in the process of introduction;

2. Solve technical problems on the production site, and organize and carry out relevant training;

3. Prepare product production process documents, organize training, implement product process requirements, and constantly explore and implement new working methods and new process measures according to product characteristics;

4. Prepare tooling according to process needs and be responsible for verification, improvement and actual use of process tooling;

5. Measure, update and manage the standard working hours of products, and provide the evaluation data of labor cost and production efficiency;

6. Continuous optimization and improvement of production process to improve production efficiency and product quality.

Qualifications:

1. College degree or above, major in mechanical design and manufacturing, automation, electromechanical integration, etc;  

2. At least three years of experience in machining process design;  

3. Familiar with machining process flow, can quickly master product performance, product structure

(1) Improve the company's quality management system and maintain its effective operation;

(2) Be responsible for the quality management of basalt fiber and composite materials at the production site, do a good job of quality monitoring in the production process, and timely organize to solve the technical quality problems of basalt fiber products in production to ensure product quality;

(3) Responsible for the trial production of new basalt fiber products and new processes, and the quality management of the first batch of production;

(4) Be responsible for guiding the inspectors of basalt fiber and composite materials to make records of incoming inspection, process inspection, finished product inspection and batch management of raw materials/outsourced parts/purchased parts;

(5) Responsible for organizing the review of the treatment of nonconforming basalt fiber and composite materials on the production site;

(6) Collect, statistically analyze the quality information of basalt fiber and composite materials, guide the filling of inspection records, and regularly collect, sort out, bind and file them;

(7) Responsible for the quality management training of inspectors, and organizing the work study of inspectors

1. Properly handle emergencies in the production process to ensure smooth production and 100% completion of production tasks;

2. Be responsible for the drafting, revision, supervision, inspection and guidance of process procedures of various varieties;

3. Supervise and inspect the production process discipline and process hygiene, find out the causes of abnormalities in the workshop production process in a timely manner, report to the workshop director, and solve them in a timely manner;

4. Be responsible for the verification, preparation and implementation of production processes of various varieties;

5. Strictly implement the workshop product process procedures, post SOP and cleaning SOP;

6. Check the workshop site at any time to see if there is any potential quality hazard, deal with and solve the potential quality hazard in time, and ensure that the product qualification rate is 100%.

7. Participate in the weekly safety self inspection of the workshop, properly handle the safety hazards detected, and ensure that there are no major safety accidents in the workshop throughout the year;

8. Assist production technology department and workshop to carry out

1. Responsible for the promotion and sales of key channel businesses in the region under its jurisdiction;

2. Provide customers with perfect pre-sales, sales and after-sales services of insurance;

3. Actively communicate with customers, timely feedback customer information, safeguard customer interests, and provide quality services;

4. Basic work in daily management of auto insurance customers.

The position is located in Wuli Store, Jiangbei, the main urban area. Welcome to join us. The salary is high, the benefits are good, and the job is easy

Qualifications:

1. Insurance experience is preferred;

2. He is optimistic about the prospect of the insurance industry, loves the insurance business, and has the intention of long-term development in the industry;

3. He is active, has a good attitude from the foundation, is positive, and is a positive person;

4. Strong sense of responsibility and team spirit;

5. Education requirements: full-time college degree or above, especially excellent ones can be relaxed.

1. Be familiar with the material properties and processing properties of PVC, PP, PE and other general resins, and understand the material properties and processing properties of various additives.

2. Familiar with plastic molding processing principles (extrusion or injection molding), able to deal with technical problems in the production process, relevant experience is preferred.

3. Be familiar with extrusion or injection mold structure, and have knowledge of mold technology improvement.

4. Good communication and coordination skills and team spirit.

5. Proficient in using office software.

Post responsibilities

1. Formulate process documents, technical standards and raw material formula standards related to workshop production, and supervise their implementation.

2. Assist the workshop to deal with quality abnormalities, identify and prevent major abnormalities in time.

3. Lead the workshop to improve the process and technology, and continue to reduce costs and increase efficiency.

4. Promote the work related to mold testing and material testing in the workshop.

5. Guide the workshop technical foreman and adjustment workers, and be responsible for their training

(1) Be responsible for product design, complete product structure design, prepare processing technology, site construction scheme and material consumption quota;

(2) Be responsible for solving the technical and quality problems of products in the process of trial production, production and use;

(3) Be responsible for completing other tasks assigned by the superior.

2. Job requirements

(1) Bachelor degree or above, major in mechanical design and manufacturing;

(2) More than 3 years of professional related work experience; Mechanical product development experience in large manufacturing enterprises is preferred;

(3) Skilled in using Solid/UG/CAD and other mapping software;

(4) Work actively, have a sense of responsibility, strong hands-on ability, clear thinking, clear goals, and team spirit.

1. Analyze and convert drawings and data according to project needs, apply for DFM and DPR, prepare relevant technical documents, and prepare relevant technical documents required for PPAP submission such as FEMA and control plan according to project stages;

2. Be responsible for the design of process routes and the preparation and improvement of process documents;

3. Be responsible for the design of tools and measuring tools for product development, as well as the formulation and review of fixture plans;

4. Provide technical services on site, solve technical problems on site, and cooperate with other departments to improve technology and provide technical support;

5. Process support for product quality, cost, efficiency and other improvements;

6. New product development shall be carried out in the order of APQP.

Job requirements:

1. College degree or above, major in mechanical design;

2. Have at least 2 years of working experience in mechanical manufacturing, understand the processing procedures, and be familiar with tools, fixtures, measuring tools, auxiliary tools, etc

1. Be responsible for the preparation of the company's device product test plan and test cases;

2. Be responsible for product function test and record, and product technical data preparation;

3. Be responsible for on-site commissioning of the first three projects of new products and handling of on-site quality problems;

Job requirements:

1. Experience in product development or testing, familiar with secondary commissioning or design of power system is preferred.

2. Major in electrical or automation, measurement and control, etc.

2. Follow up of product preliminary trial production, problem handling, customer docking, data submission, product sample signing;

3. Working experience in auto parts or auto interior design is preferred;

4. Quotation and technical analysis of new projects

Supplementary notes:

1. College degree or above;

2. At least 1 year working experience in auto parts industry;

3. CAD and 3D software are preferred.

4. Have strong learning ability, flexible handling ability, strong communication and coordination ability.

5. With a C1 driver's license and actual driving ability, you need to drive a company car when you are on a business trip.

1. Repair, maintain and transform the electrical part of the equipment;

2. Assist the equipment internal staff to improve the preparation of department operation instructions;

3. Be responsible for project implementation tracking.

Job requirements:

1. At least 3 years of electrical design or maintenance experience;

2. Proficient in electrical principle, able to modify circuit independently;

3. Modify PLC program;

4. Experience in after-sales service and project leader is preferred.

The working address is at the wellhead

1. Be familiar with the adjustment of four axis and five axis machining centers in Mitsubishi and Franke systems;

2. Able to grind simple tools;

3. Be able to understand simple drawings and procedures;

4. Adapt to two shift working system;

5. Careful, responsible, hardworking;

6. Machining industry background is preferred

1. Responsible for the preparation of the company's machining process, mainly including: turning, grinding, drilling;

2. Be responsible for the improvement of the company's machining problems;

3. Assist the machining workshop director to manage the workshop and effectively complete production tasks;

4. Complete other tasks assigned by leaders;

Qualifications:

1. College degree or above, experience in mechanical industry is preferred.

2. Strong sense of responsibility and proactive.

Welfare benefits: the company provides food, housing, five insurances, and various bonuses and subsidies,

Salary: 5000-1000 can be contacted in person or by phone,

Work address: No. 11, Pingxi Road, Degan Street

2. Be responsible for product quality control, establish quality system and solve quality problems

3. Be responsible for equipment selection and design of tooling and inspection tools,

4. Responsible for formulating production quota.

5. Be responsible for equipment inspection and maintenance

6. Training and assessment of subordinates

7. Site environmental management

Requirements

1. College degree or above in machinery

2. Relevant work managers with more than 10 years

3. Healthy, normal vision, no hypertension, heart disease, diabetes and other organ diseases, height above 1.6

1. Be responsible for the matching of products on the same day and the type and quantity of paint required on the same day;

2. All paints must be mixed in correct proportion;

3. Must be familiar with the performance of the paint used by the company;

4. Responsible for cost control of paint accessories;

5. Be responsible for completing the temporary work arranged by leaders.

Job requirements:

1. Be responsible for the cleaning of paint mixing room;

2. Wear protective equipment before work;

3. At least 5 years of working experience in this position;

4. Obey arrangements and have strong communication skills.

1. Participate in the implementation of product development and research, and formulate development plans;

2. Responsible for the design of general assembly drawing and component drawing of mechanical automation equipment;

3. Be responsible for completing the preparation of technical documents and drawing design as planned, recording various work elements in time, and preparing complete product documents;

4. Be responsible for the assembly and commissioning of mechanical parts, and deal with design problems during commissioning;

5. Be responsible for solving technical problems of mechanical part.

Job requirements:

1. Structural automation is preferred;

2. Be familiar with the design principle of mechanical automation equipment, and skillfully use PROE/CAD/Solidwork/UG and other related design software;

3. Be able to independently complete the design of general assembly drawing and component drawing of mechanical automation equipment;

4. Be familiar with the design standards and specifications of various mechanical parts, standard parts, non-standard parts, general parts and pneumatic components;

5. Active in thinking, good at communication and teamwork spirit;

6、...