1. According to the design task and process, be responsible for the matching design of the motorcycle's three electricity integration;

2. Be responsible for type selection management of core components;

3. Be responsible for testing, fault analysis and improvement of the three electricity system;

4. Responsible for the preparation of relevant technical documents;

5. Be responsible for docking and technical support with the main engine factory and battery factory;

6. Organize and coordinate the team, carry out cross departmental cooperation, and realize the optimization of the technical functions of EIC;

7. Support after-sales service to solve on-site difficult problems.

Job requirements:

1. College degree or above, major in electrical or mechatronics;

2. Have at least 3 years of work experience, be familiar with the electrical system architecture, battery management system, power matching of new energy motorcycles, and have team leadership experience or successful project experience is preferred;

3. Understand and master the principle of vehicle electrical system and be able to integrate the system;

4. Proficiency in 2D and 3D

2. Skilled in making DFM analysis report, communicating with customers about changes and modifications, and reasonable mold structure design.

3. Be able to modify the mold data according to the mold sample, size inspection report or customer design changes.

4. It is better to have mold flow analysis ability and make mold related documents.

5. Be capable of salary interview.

Good car route; Building 5, No. 66, Tonggui Third Road, Yufengshan Town, Yubei District, Chongqing

2. Be responsible for the overall control of the project product development progress, and complete the conversion from product design to mass production according to the company's specified nodes;

3. Be responsible for guiding and assisting the production process.

Supplementary notes:

1. Major in mechanical design and manufacturing and its automation, mechanical and electronic engineering, mold design and other engineering technologies;

2. Working experience in product development, process design or other machining/mold manufacturing is preferred;

3. Professional knowledge related to design/manufacturing technology, 3D design, application of knowledge of turning and milling, etc. is preferred;

4. Have some professional knowledge related to parts manufacturing, master the knowledge of development procedures and quality management, be familiar with the design standards of processing technology, tooling accessories, molds, measuring tools, etc., and be able to use computers and other aids

1. Proficiency in CATIA, CAD and other development software; The application software completes the design and development of 3D data and 2D drawings, understands the general layout design, ergonomics and DMU, and understands the CAE simulation analysis (only one can be satisfied);

2. Active thinking, with certain communication and coordination ability; Be able to communicate with suppliers independently and prepare technical development agreements or relevant documents;

3. Responsible for the design of new product assembly and parts; Be responsible for technical disposal of product design changes, drawing of design change drawings, etc., and be able to participate in scheme formulation independently or according to design input;

4. Organize and promote the review and signing of customer technical agreements and supplier technical agreements;

5. Tracking management of product sample trial production process, sample test, user verification, etc., and technology, NV

1. College degree or above, major in mechanical design and manufacturing, more than 3 years of working experience or excellent fresh graduates;

2. Under 35 years old, physically and mentally healthy;

3. Proficiently master 3D drawing software UG or Solidworks or Pro/E, 2D drawing software AutoCAD or CAXA, etc., carry out structure and assembly design of mechanical parts, and be able to draw;

4. Have a certain understanding of various machining processes and electrical automation control;

5. Good team work spirit, good pressure resistance and excellent execution ability;

6. Experience in non-standard automation related project design is preferred;

Job description

1. Responsible for the scheme design of non-standard projects;

2. Responsible for 3D modeling of mechanical structure of non-standard equipment and outputting 2D design drawings;

3. Responsible for outsourcing processing of mechanical parts, tracking the processing progress and quality control;

4. Responsible for editing

1. Be able to read plane drawings;

2. Skillfully use tools to grind, shape and assemble parts;

3. Skilled use of drilling machine;

Qualifications:

1. More than two years of relevant experience in machining industry is preferred;

2. Have some common sense of machining

3. Be able to understand part drawings and assembly drawings;

4. Be able to correctly implement the safety operation regulations;

5. Be responsible, hardworking and obey the arrangement.

1. Responsible for mechanical design related work, including parts selection, non-standard parts design drawing, production site assembly guidance, pre-sales and after-sales technical support, etc;

2. Responsible for diesel engine modification, diesel engine maintenance process preparation, generator set assembly process preparation, etc;

3. Be responsible for project management related to technology;

4. Temporary work assigned by company leaders.

Job requirements:

1. Proficiency in mechanical design software (CAXA/CREO preferred) and office software;

2. Major in mechanical design, manufacturing and automation, with experience in diesel generator set industry and electrical design experience is preferred;

3. Careful work, strong sense of responsibility, good at communication.

1. Be responsible for the development and maintenance of dealers and customers, establish relevant file information, formulate product cooperation plans, and reach cooperation;

2. According to the sales task and the different situations of each dealer and customer, carry out product empowerment to promote the achievement of performance;

3. Regularly check and analyze dealers and customers, formulate follow-up and improvement plans, and ensure the achievement of performance;

4. Provide professional consultation to dealers and customers.

Qualifications:

1. College degree or above, male or female;

2. More than 3 years of sales or channel development experience, and relevant working experience in the real estate industry and second-hand housing industry is preferred;

3. Fluent Mandarin, strong language expression ability, good logical thinking ability;

4. Able to travel for a short time.

1. According to the drawings, select the appropriate welding process and raw materials to weld the product parts and equipment;

2. Remove welding slag, timely inspect after welding, and make welding records to ensure welding quality;

3. After welding, check the slag inclusion and incomplete penetration, and conduct repair welding and re welding in time;

4. Regularly maintain the welding machine, and repair the welding equipment independently or with others.

5. Be familiar with the welding materials of various equipment and their corresponding welding requirements, and use them skillfully;

6. Enterprising, highly enterprising, responsible and good professional ethics. Obey management.

1. Be familiar with drawing using SolidWorks, Autocad, proe, UG and other software.

2. Have some basic knowledge of petrochemical machinery, and have the ability to independently develop and design drawings of petrochemical machinery and equipment is preferred.

3. According to the company's equipment process plan, be responsible for petrochemical machinery and equipment process drawing, vacuum oil filter equipment, pipeline and component drawing, 3D modeling and 2D drawing of engineering sketch.

4. Be able to use basic computer office software, such as Word, Excel, Adobe Acrobat.

5. Good communication skills and team spirit, serious and responsible.

6. Strong sense of responsibility and team spirit are required.

7. Bachelor degree or above in petrochemical machinery design, experience in petrochemical machinery design and drafting is preferred.

8. Age: 24-55 years old.

2. Be responsible for machine preheating and debugging injection molding machine parameters;  

3. Management and maintenance of injection mold;

4. Record and summarize relevant design data in production;

5. Responsible for regular maintenance and cleaning of injection molding machines and other production equipment;

6. Assist lean engineers to analyze and solve product process problems and process improvement

Other requirements:

1. Male, 25-45 years old, junior high school or above

2. More than 2 years of injection molding experience, able to adapt to night shift

3. Understand the structure and performance of injection mold and injection molding machine, be able to debug the machine, be skilled in testing new products and improving process performance;

4. Proficient in process commissioning of injection molding machine, manipulator commissioning, injection molding timing valve commissioning;

2. Be responsible for guiding the establishment of interior and exterior decoration product design target matrix;

3. Be responsible for guiding the design process of interior and exterior decoration products, establishing various verification criteria for the structure, process, comfort, etc. of interior and exterior decoration products, participating in the review, and putting forward rectification opinions for the product design and process problems arising from the product verification and review process;

4. Take charge of the countermeasures against the problems of interior and exterior decoration products in the process of design verification and test verification;

5. Be responsible for the introduction and establishment of advanced design concepts, specifications and test standards in the industry.

2. Cooperate with the review, verification and confirmation of product design at all stages;

3. Cooperate to solve major technical problems in production and R&D;

4. Preparation and technical filing of relevant drawings.

Supplementary notes:

1. Have experience in production line, non-standard equipment control program design, installation and commissioning, and can detect the upper computer.

2. Knowledge of electrical and industrial automatic control; Able to use Protel, CAD and other software;

3. Proficiently use Siemens PLC for industrial control system. Skilled in using Siemens touch screen. Familiar with electrical standards;

4. Have a strong sense of responsibility, good teamwork skills, communication skills, good at learning; Strong practical ability.

1. Responsible for the promotion and sales of key channel businesses in the region under its jurisdiction;

2. Provide customers with perfect pre-sales, sales and after-sales services of insurance;

3. Actively communicate with customers, timely feedback customer information, safeguard customer interests, and provide quality services;

4. Basic work in daily management of auto insurance customers.

The position is located in Wuli Store, Jiangbei, the main urban area. Welcome to join us. The salary is high, the benefits are good, and the job is easy

Qualifications:

1. Insurance experience is preferred;

2. He is optimistic about the prospect of the insurance industry, loves the insurance business, and has the intention of long-term development in the industry;

3. He is active, has a good attitude from the foundation, is positive, and is a positive person;

4. Strong sense of responsibility and team spirit;

5. Education requirements: full-time college degree or above, especially excellent ones can be relaxed.

1. Responsible for telephone contact, development, establishment, maintenance and management of customer resources;

2. Deeply explore customer needs and recommend the company's products and services to customers;

3. Timely communicate with customers, do a good job of information feedback and customer follow-up support services;

4. Be fully familiar with the business workflow, and help customers solve problems in the process of using the company's products;

5. Achieve the company's sales goals and ensure the smooth completion of the team's tasks.

The position is located in Wuli Store, Jiangbei, the main urban area. Welcome to join us. The salary is high, the benefits are good, and the job is easy

Job requirements:

1. I am optimistic about the insurance industry and have the idea of using it as a work skill;

2. Strong sense of service and responsibility;

3. Good ability to deal with emergencies.

fringe benefits:

1. High returns: base salary plus commission, unlimited salary, more pay for more work;

2. Fair promotion mechanism: give everyone

1. Actively and earnestly complete the work assigned by the leader;

2. Be able to bear hardships and stand hard work;

3. Able to work in two shifts;

4. Be able to assist the superior leaders to complete other work.

Job requirements:

1. Familiar with injection molding production and processing technology;

2. Management experience;

3. Can debug Yizhimi and Zhenxiong injection molding machines;

4. Familiar with computer keyboard, keycap and other electronic products injection molding process is preferred.

5. High school diploma;

6. Recognize the company's corporate culture, have a positive and sunny attitude, a sense of responsibility, and a team spirit.

1. Be responsible for product design and development tasks, complete specific product development, drawing design and other work, and track the whole project;

2. Review the product design process and organize the preparation of technical data;

3. Confirm the technical parameters and processes of the supplier's products;

4. Be responsible for the improvement of the company's existing products, the company's project experiments and experimental reports;

5. Participate in the feasibility study of product project initiation, and organize the company's product pre research and technology pre research;

6. Participate in system scheme design and prepare technical patent application documents;

7. Be responsible for technical support within the technical team;

8. Be responsible for the promotion of the project, and coordinate with customers, suppliers and other related matters;

9. Make design guidelines, assist in production, procurement and other work;

10. Collect relevant latest technical data, and make technical preparations for the update and development of products;

11. Organize discussion about products

1. Read and understand engineering drawings, technical specifications and relevant documents to ensure accurate understanding and implementation of requirements;

2. Use sheet metal processing equipment, such as shearing machine, bending machine, punch, etc., to process metal sheets into various shapes and sizes;

3. Fabricate and assemble parts, components or finished products, check the quality before completion, and make necessary repairs and adjustments;

4. Operate welding equipment to connect and repair metal materials, such as electric arc welding, argon arc welding, laser welding, etc;

5. Use measuring tools and instruments, such as calipers, gauges, thickness gauges, etc., to conduct size and quality inspection and ensure that the products meet the requirements;

6. Observe and implement the relevant safety regulations and operating procedures, ensure the safety of the working environment, and use personal protective equipment.

Job requirements:

1. Be familiar with the disassembly, unfolding and processing characteristics of sheet metal parts;

2. Be familiar with relevant knowledge of mechanical manufacturing process;

3. Familiar with sheet metal

2. Establish and improve product incoming materials and inspection process according to product inspection needs, and issue inspection report.

3. Determine and analyze the quality problems in the production process, find the root causes of the problems, and make continuous improvement.

4. Develop special training programs and regular training programs according to the skill requirements of department personnel.

5. Supervise the implementation of inspection requirements during production, verify and improve various quality management systems.

6. Data statistics and maintenance;

Supplementary notes:

1. College degree or above in related majors;

2. At least 1 year of enterprise QA management experience and quality system experience;

3. Familiar with TS16949 standard and workflow, with quality audit and training experience; Proficient in using office software;

4. Strong organization, coordination and communication skills; Strong sense of responsibility

2. Assist in solving difficult problems in the product, as well as technical research and other related work;

3. Responsible for 3D design of product related parts, 2D engineering drawing design, and daily maintenance of technical documents.

Coating workshop production, product quality, 6S management, process management, cost management

job content:

1. Be responsible for the normal production of products, commissioning and maintenance of processes;

2. Be responsible for making relevant records of all proofing products truthfully;

3. Quality control of the products produced in the workshop, and control the one-time coating qualification rate of the products;

4. Be responsible for all work related to oil adjustment, programming and process adjustment; (6S on site)

5. Train operators according to painting and ABB safety operation regulations;

6. Check the effectiveness of the documents and records used by the workshop at any time;

7. Implement the verbal arrangements made by the technical director (company leader);

1. Mechanical engineering design automation production line, conveyor line, special equipment and other non-standard equipment.

2. Mechanical engineering outputs plane processing drawings.

3. Be responsible for the distribution of workshop drawings.

Supplementary notes:

Proficient in the use of plane and three-dimensional design software, with years of experience in non-standard equipment, and successful cases are preferred.

1. More than three years of mechanical design experience;

2. Be familiar with the manufacturing process and processing technology of products; Good mechanical drawing skills

3. Skillfully use 3D software.

4. Skillfully use Autocad

1. High return: no responsibility base salary+high commission+year-end bonus+job promotion;

2. Fair promotion mechanism: open and transparent promotion mechanism, giving every young person with ideas and abilities a fair chance to promote;

3. Perfect training system: the company provides professional pre job training, so that each workplace white rapid growth;

4. Extensive network resources: we are a physical factory, facing the bosses and executives of upstream and downstream enterprises, and can lay a solid foundation for our own network.

1. College degree or above, science and engineering background, mechanical related majors;

2. More than two years of project development experience, familiar with IATF16949, and able to implement project development according to its specifications;

3. Experience in auto parts project development is preferred

job content:

1. Connect with customers, communicate, coordinate and transform customer needs;

2. Sort out and digest customer information;

3. Organize the content to review the technical requirements, quality requirements and progress requirements of customer information;  

4. Tracking of APQP, PPAP development plans and big schedule development plans; Understand the five tools and system documents.

5. Analysis of the completion of sub plans, such as delay, assessment of the impact on the grand schedule and other arrangements such as rescue measures;

Job requirements:

1. 3-5 years of operation in product design industry;

2. Be familiar with product structure process and mold structure process;

3. Proficient in UG, CAD, CATIA and SW software

4. Love teaching and have good expression ability!

5. Strong team awareness and positive energy!

6. Obey management, cooperate with teaching arrangements, and use professional knowledge to provide accurate and personalized course teaching services

Fully responsible for the company's R&D, technology and quality work.

Management authority: preside over the company's research and development, technology, safety and quality work, organize the design unit and experts to carry out technical checks on the feasibility and preliminary design of the company's project construction. Guide, supervise and manage the work related to R&D, technology and quality at all levels of the company. And undertake and implement the established obligations of various rules and regulations.

Management responsibility: take full responsibility for the company's R&D, technology and quality work.  

operating duty:

1. Under the leadership of the general manager, he is fully responsible for the company's research and development, technology and quality management, and is responsible to the general manager.

2. Organize the review of project R&D and technical scheme, and optimize the design scheme on the premise of ensuring project safety and meeting operating conditions.

Job requirements:

1. Have a bachelor's degree or above and a senior professional title in engineering management.

2. Be familiar with the professional technical business of the project, have the ability to put forward key technical topics, team

2. Responsible for the design of electrical schematic diagram, PLC programming, debugging, product selection, etc;

3. Early project review, later equipment programming and commissioning;

4. Prepare equipment acceptance data, prepare operation instructions and other relevant documents;

5. Be able to independently complete the electrical design of the project and the selection of relevant parts

Supplementary notes:

1. College degree or above, with unlimited majors, able to travel at home and abroad;

2. More than 3 years of experience in electrical design and PLC programming of non-standard assembly lines and testing equipment;

3. If the same position experience is less than 3 years, you must be fluent in oral English;

4. Careful work, strong sense of responsibility, quick thinking, strong team spirit;

5. Good professional ethics and quality, able to work under pressure.

Electrical engineering and its automation

2. Strictly implement the hot work system, and carefully check whether the welding machine, welding tools and protective equipment are in good condition before welding. Do a good job in safety inspection;

3. Assist the maintenance technician to complete the maintenance of construction machinery;

4. Complete other work assigned by the superior;

5. Strong safety awareness, with driver's license, can drive out independently to complete welding work.

Supplementary notes:

Electric welding, sheet metal, secondary welding, oxygen cutting, must be able to drive, have a C1 driver's license, and hold a welder's certificate.

1. College degree or above in CNC, automation, machinery and other related majors;

2. At least 3 years working experience in CNC programming of mechanical parts;

3. Familiar with lathe machining and machining center as well as mainstream CNC programs such as FANUC, Mitsubishi and Siemens;

4. Skilled in CAD and CAM software, with electrical experience is preferred;

5. Experience in mold machining center;

1. More than 3 years of working experience, military products, medical, automated parts processing is preferred.

2. Obedience to arrangement, strong sense of responsibility, communication ability, team spirit.

Job requirements:

1. High school or above

2. More than 3 years of CNC automation programming experience, able to independently complete the programming of spare parts

3. Proficient in CNC programming, familiar with machining process and process methods, with CNC program optimization ability;

4. Have strong coordination and communication skills, ability to analyze and solve problems, good pressure resistance and confidentiality awareness.

1. Responsible for the formulation of product standard working hours, evaluation of production capacity, manpower and unit price;

2. Planning production line, making production line layout, formulating and training production process SOP and standardized operation;

3. Production line balance analysis and improvement; Manufacturing and processing cost estimation;

4. Work study and work improvement to improve production efficiency;

6. Assist the implementation and development of relevant work of the department and other departments;

7. Inspect the operation methods and production processes of employees in each workshop from time to time;

8. New products are reviewed from the perspective of manufacturability, new process production is guided and tracked, and abnormalities are handled in a timely manner,

9. Lead or assist RD in the specific implementation and follow-up of new products, new materials, new models and new processes, monitor and record process change data in real time, analyze, compare and propose process improvement and implementation status, and report the results of project implementation in a complete document report