1. Product scheme design, hardware and software design, development and production;

2. Draw electrical schematic diagram, PCB diagram and program;

3. Prepare the demand list of design product components;

4. Prototype test and record data;

5. Prepare technical standards, inspection standards and process requirements for designed products;

Job Requirements

1. College degree or above in electronics related majors;

2. More than 3 years of working experience in electronic control, with a certain software programming foundation and strong hands-on ability;

3. It is required to have solid knowledge of analog electricity, digital electricity and SCM;

4. Skillfully use relevant design software;

5. Good sense of responsibility, communication ability and team spirit;

6. Have strong learning ability and ability to solve problems independently;

1. Bachelor degree or above, major in automation, electrical automation, electromechanical integration, vehicle engineering, etc;  

2. More than five years' experience in electric appliance development of motorcycle/electric motorcycle, familiar with the whole vehicle development process;

3. The scheme design of the electrical system of the whole vehicle, the selection and matching test of electrical components, and the technical and performance requirements of the whole vehicle;

4. Preparation of test items and technical standards for electrical components and verification of product reliability;

5. Familiar with the operation and application of CATIA/UG, AutoCAD, Office and other software;

6. High enthusiasm for work, strong project promotion and execution, team spirit, good at communication, quick thinking;

2、 Qualifications:

1. According to the design requirements of the whole vehicle project, be able to independently complete the design work of the motorcycle/electric whole vehicle circuit, including the design scheme, electrical schematic diagram, wiring process, understand the technical development direction of the industry, and be familiar with the whole vehicle

1. Responsible for the technical design of electrical architecture, parts selection, structural layout analysis, etc. of the whole recreational vehicle and special vehicle;

2. Responsible for the engineering development, test, matching, technical document preparation and problem rectification of the electrical components of the project;

3. Be responsible for improving the quality of electrical components in mass production projects, improving user complaints, and solving common problems

4. Be responsible for the research on new technologies of electrical components, including the verification and promotion of intelligent and energy-saving technologies;

5. Be familiar with the design and development process of special vehicles, and be responsible for the formulation and optimization of the design process, standards, quality and other systems in the professional field;

6. Be responsible for the control and resource coordination of electrical component product suppliers·

Qualifications:

1. Education requirements: full-time university bachelor degree or above;

2. Professional requirements: mechanical engineering, vehicle engineering, electrical and automation;

3. Work experience: 3 years or more of electrical parts related production in the main engine factory

2. Be responsible for the formulation of technical scheme and production process.

3. Responsible for the design, production and follow-up of tooling, fixtures and molds.

4. Review the technology and process of suppliers.

5. Be responsible for the accounting and review of product prices and costs.

6. Responsible for the formulation of technical and process improvement plans for old products.

7. Be responsible for the daily management of the technical department.

8. Responsible for the formulation of work objectives and performance appraisal of department personnel.

9. Be responsible for team building, personnel training and cultivation of the technical department.

10. Complete other work assigned by the superior.

Job requirements:

1. More than 8 years of experience in technology development and management of automotive interior parts (seat foam, interior covering parts).

2. Be familiar with the project development process and standards of the automotive OEMs.

3. Good communication and coordination ability (internal and external)

4. Strong sense of responsibility, good stability

1. Organize the electrical design, testing and quality improvement of electric vehicles;

2. Be responsible for the review of technical documents such as the development project document, test report and certification sheet of electrical components;

3. Be responsible for guiding and participating in new product electrical design and innovative design of electrical components;

4. Organize the establishment of standards for electrical components and assist in the promotion of the whole vehicle project;

5. Guide suppliers to improve quality and technology, and participate in the evaluation of electrical parts suppliers;

6. Complete other work temporarily assigned by superior leaders.

Job requirements:

1. Bachelor degree or above, solid basic knowledge of electrical appliances, good ability to try electrical schematic diagrams, electricians and electronics

2. Have the ability of demand analysis, strong logical analysis and independent problem solving

3. Effective communication, excellent execution, understanding and judgment, organization and coordination, analysis and keen insight

Job responsibilities:

1. Development and design of automobile electronic power steering column (EPS) and steering gear electronic controller (ECU), and build the controller software and hardware platform;

2. Connection, communication and exchange with the main engine factory;

3. Technical support and management of suppliers.

Supplementary notes:

Job requirements:

1. Bachelor degree or above in electronics and automation related majors;

2. Familiar with IATF16949 product development process in the automotive industry, and familiar with development platform software, Altium, Allegro, candence, MATLAB, AUTOCAD and other software;

3. Have certain design work experience, electronic and electrical design ability, and be able to independently undertake design tasks;

4. Have certain communication and learning ability, work seriously, have a strong sense of responsibility, and can withstand certain work pressure.

5. Salary is negotiable. Work location: II

1. Bachelor degree or above

2. More than 1 year experience in auto parts product development (first tier suppliers are preferred)

3. Be able to skillfully use CATIA and AUTOCAD software

Work and rest:

Nine to five thirty, weekend, annual leave

fringe benefits:

Project award 3-5 months salary+five insurances and one fund+overtime salary+holiday benefits+birthday benefits+free working meal+free physical examination+free uniforms+free training

Work location:

No. 899, Haier Road, Jiangbei District, Chongqing

Job responsibilities:

1. Fully understand the customer's requirements, design the size and structure of the product based on the customer-centric purpose, draw engineering drawings, and select the best materials;

2. Participate in the review of injection mold scheme to optimize product design and mold design;

3. Participate in the trial production of new products, actively communicate with mold suppliers and material suppliers, and participate in the process development based on mold and material characteristics;

4. Solve the problem of

2. Conduct technical communication with customers, clarify customer requirements, needs and expectations, organize the review of customer standards, confirm the design and development input, and develop technical solutions;

3. Assist in signing foreign technical contracts and agreements (OEMs and supporting suppliers);

4. Assist in formulating product development plan according to new project development plan;

5. Carry out product structure design, material definition and relevant design calculation, issue product 2D and 3D drawings, and build product BOM according to project development goals, project budget and customer technical requirements;

6. Prepare technical standards and specifications;

7. Prepare and maintain DFMEA, and determine the list of special characteristics of products;

8. Determine product DVP, PVP list and plan;

9. Support relevant departments to solve quality problems and work

1. Mainly responsible for the quotation of new auto parts, new product development and mass production

2. Responsible for the quotation of new products and the preparation of product technical scheme and TR at the early stage of quotation, and the technical communication with customers at the early stage of development (customer input identification)

3. Be responsible for the technical management of new product development in the whole life cycle, and develop new products according to the APQP development process

4. Responsible for the preparation of mold design, APQP and PPAP data

5. Be responsible for the preparation of design specifications for special fixtures, special measuring tools, special containers, special tools and packaging, and track the actual progress

6. Be responsible for on-site technical services, quality tracking and process records of new products in sample, small batch and mass production stages

7. Take the lead in developing and identifying the project at all stages according to the APQP development process

8. Be responsible for organizing project team members to hold special meetings on summary and rectification at each stage, and be responsible for the work before mass production

1. Participate in the preliminary data review of new products, summarize the trial production experience, participate in the formulation of design schemes, and check the compliance of new products with design standards

2. Prepare the project schedule, promote the project according to the schedule, and complete the internal DV assessment

3. Take the lead in the improvement of lamp performance, arrange the change and improvement of parts suppliers, complete the OTS approval of parts, and take the lead in the submission of APQP and PPAP

4. Complete the optimization of the appearance size of lamps, establish the size standard of lamps, negotiate with customers on the size control standard in the trial production stage, and hand over the management standard

5. Collect and formulate improvement countermeasures for problems (host and internal production), track the improvement of problem points, and report the improvement progress of problem points

Work location:

1. Chongqing Minglang Lamps Co., Ltd., Luohuang Town, Jiangjin District, Chongqing

2. Jushang Coffee Minglang Development Department, Floor 2, Building 3, Caixin City International Commerce, Longxi Street, Yubei District, Chongqing

Position is important

1 Implement the arrangement of the Director of Product Development Department

2 Be responsible for the preparation of project schedules.

3 Be responsible for the follow-up of each project node and the production of PPAP samples.

4 Responsible for the summary and archiving of technical problems and the preparation of APQP during the development of new products.

5 Timely report the work of the project team under its jurisdiction to the director.

6 Check the e-mail and reply, track the project progress in each department and workshop and promote it.

7 Contact and communicate relevant matters by telephone, and update the project progress every two days.

8 Assist the quality control engineer to deal with the quality problems in the production process, and track the mold repair status.

9 Prepare documents or update and distribute them.

10 PPAP sample trial arrangement/submission for testing, PPAP document package data preparation.

11 The drawings shall be updated and printed (the size number and technical description shall be translated), the packaging process shall be made and issued.

12 Product mold repair drawing

1. Responsible for the development and quality of automotive interior and exterior photoelectric products;

2. Response to abnormal quality of automotive photoelectric products and sudden quality accidents;

3. Quality evaluation and improvement of automotive photoelectric products;

4. Evaluation management of production process change and development and implementation of reliability scheme for automotive photoelectric products

Job requirements:

1. University degree, major in electrical engineering, physics, etc;

2. Knowledge of electrical product development experience in automotive industry is preferred;

3. Good at communication, with strong sense of responsibility and team spirit.

2. Be familiar with motorcycle plastic process.

3. Be familiar with the manufacturing process of auto parts.

4. Responsible for product development and mass production of new projects.

5. 3D drawing: making structural data

6. Preferably engaged in the lighting industry, salary negotiable

6. Able to adapt to ERP system management

2. Complete modeling, product simulation and output drawings;

3. Participate in product trial production, testing and analysis;

4. Provide technical guidance, coordination and communication for production;

Supplementary notes:

1. Bachelor degree or above in vehicle engineering and machinery related majors;

2. Relevant design work experience;

3. Work conscientiously and carefully.

2. Complete the collaborative design task before winning the bid.

3. Complete the collaborative design task after winning the bid, and output 3D data, 2D drawings, the first version of BOM, and the first version of special characteristics list.

4. Develop relevant product requirements and material specifications.

5. Participate in customer technical exchanges and provide solutions for customers.

6. Participate in design change review and verification.

7. Responsible for the formulation of rectification plan and progress tracking of problems in the project development process;

7. Summary of product design experience and lessons learned.

8. Participate in design and development review and verification.

9. Complete temporary tasks assigned by leaders.

6. Be responsible for tracking various tests of products, analyzing and confirming test problems, developing improvement plans, and promoting the achievement of design goals;

7. Be responsible for the preparation of relevant design processes and standard documents of the department, as well as the special work in charge..

Supplementary notes:

1. Skilled in Office

2. Complete the implementation of software system code, write code notes and development documents;

3. Assist engineers in system function definition and program design; Assist the test engineer to develop the test plan and locate the problems found;

4. Complete commissioning, testing and maintenance according to design documents or requirements;

Supplement:

1. Clear and agile thinking, strong logical analysis ability, good language and written expression ability;  

2. Good communication skills, team work and practical spirit; Strong sense of responsibility;

3. Hardworking, professional research spirit.

2. Be responsible for production technology management in terms of equipment operation and product mold making.

3. For the entry of new products and projects, do a good job in technical research and development and supporting work.

4. Assist the Production Department to cooperate with the operation according to the production plan.

5. Be responsible for completing relevant drawings and reports of the department.

6. Assist in the implementation of quality standardization management.

7. Assist in the preparation and approval of safety technical procedures, operating procedures and operating procedures, and check the implementation of procedures and systems.

8. Actively promote the application of new technologies, new materials and new processes, and carry out small reforms and small innovations in production practice to promote product innovation.

Job requirements:

1. Bachelor degree or above, major in auto parts.

2. More than three years of experience in automotive parts machining technology, with automotive three-way catalytic converter from

2. Prepare annual, quarterly and monthly construction equipment pre inspection plans, equipment overhaul and medium maintenance plans, spare parts manufacturing and supply plans;  

3. According to the construction development or project needs, cooperate with the superior to formulate new equipment procurement and investment plans, and organize the selection and purchase of equipment;  

4. Be responsible for the inspection, record, assessment and daily management of the operation of various equipment of the company;  

5. Be responsible for the maintenance and management of various equipment, and play the role of audit, coordination and supervision in the installation of electromechanical equipment; 6. Be responsible for the maintenance, calibration and overhaul of electrical equipment, instruments and measuring equipment to ensure

The equipment operates normally, and relevant work experience is preferred.

6. Prepare Equipment Security

1. Be responsible for data analysis of market quality indicators such as R1000, ECB and CPU of new energy special components of new energy vehicles, and identify specific problem points, top problems and trend changes of market feedback;

2. Organize relevant units to analyze the core parts returned from the market, and define the failure mode of core parts provided by the market;

3. Assist the head of the VRT team to carry out rectification work for the projects leading to market feedback and track the follow-up market feedback;

4. Take the lead in organizing new energy VRT to carry out problem analysis, discussion and evaluation, and make detailed arrangements for follow-up work;

5. Punish violations within the scope of supervision according to the company's quality management specifications and relevant systems;

6. Prepare data reports regularly, report quality problems and track the rectification of (QTM) related problems, and supervise and evaluate project participants;

7. Be responsible for the organization and record of relevant meetings, and prepare and save documents

2. Update the design of existing products, and output the technical documents at the design and development stage.

3. In the process of product research and development, it is connected with the OEM project.

4. Synchronous development and collaborative design with the OEM.

5. Summarize design experience, analyze the causes of product problems and propose solutions.

Supplementary notes:

1. College degree or above, more than 3 years of working experience in automobile, machinery, mold and other related industries.  

2. Be able to skillfully use design software such as CATIA or UG.  

3. Familiar with plastic materials and structures commonly used in automobiles, with certain knowledge of injection molding process and mold;.   

4. Experience in auto lamps, rearview mirror and handle is preferred;

5. Those who can use the light distribution analysis software SPEOS are preferred.

6. This year's science and engineering graduates are acceptable.