With the coming of spring and the continuous rain, wooden furniture is prone to damp and mildew, which can cause the problem of moth eaten. Therefore, people should always do a good job of insect prevention strategy for wooden furniture! Next, let's learn the insect prevention method of wooden furniture with Xiao Bian! Three tricks to solve the problem of wormhole aging of wooden furniture: paint the wooden furniture that has not been damaged. Paint the wooden furniture with raw tung oil, shellac paint or varnish to make it completely isolated from the moth, so as to achieve the purpose of moth prevention. However, it should be noted that when painting, any part of the wooden furniture should be painted evenly to ensure the beauty and firmness of the paint. When the wooden furniture is damaged by insects, dichlorvos and water can be mixed into a liquid medicine in a ratio of 1:5. Spray the liquid medicine with a sprayer to make it penetrate into the furniture

Although it is not necessary to select anti-theft doors for each interior door, they will be installed. Generally, there are many wooden doors, or composite doors. The color matching problem should also be considered when selecting the door. What color should be selected for the interior door? What are the interior door color matching skills? Now let's talk about it for everyone. Let's have a look. What color is selected for the interior door? Sometimes, the living room door can still make some innovations, and the gorgeous color is also a highlight. The transparent glass floor to ceiling windows are used in the romantic landscape bedroom to let the outdoor style be released at a glance. The transparent orange door also lights up the space. The fashionable and creative living room door blooms in warmth in the sunny season. The light white soft clothes make the whole living room look clear and bright, as if it is covered by the eyes of the morning

In the process of new house decoration, we will encounter many problems. For example, it is also troublesome to customize or purchase finished furniture. Before making a decision, we should clarify these points to avoid budget overruns! 1. First, if the size of the house is small, it is recommended to customize the furniture. Due to the width or length restrictions in many places of the small house, it is difficult for us to buy suitable finished furniture. Small houses have higher requirements for use functions. Customized furniture can be customized as required, with better storage function. If you are a house type, you can buy finished furniture. 2. Look at the decoration budget. If the budget is enough, we can consider customizing furniture. Now the decoration is very environmentally friendly. We should choose regular manufacturers and good boards, so the relative price will be slightly higher. If the budget is not enough, we can choose to buy

Although the veneering materials of the two wood industry both contain the same resin, the difference in thickness and structure leads to the difference in performance. Fireproof boards and melamine boards are commonly used materials for cabinet doors. What's the difference between them? Let's listen to the small editor. Cabinet fireproof board, fireproof board and melamine board are common cabinet door materials in the current cabinet market, but many owners and friends do not understand the difference between the two materials, and many products are almost indistinguishable from the appearance. The salesmen of some manufacturers also deliberately confuse the two materials and sell melamine boards as fireproof boards. In fact, there are some differences between the two materials. Melamine board: also called double veneer. This kind of board is the paper printed with color or imitation wood grain, soaked in melamine transparent resin, and then pasted

How does the lattice wood industry ingeniously match the wood veneer in the same decoration space? 1. First, determine which wood veneer is used for the main tone (large area pattern) to determine whether the wood veneer is cold color or warm color, and then determine the matching color system. This tone should be unified and coordinated. 2. If the wood veneer you choose has a very clear and visible texture, you need to ensure that they are all of the same style or pattern, so that the atmosphere of the whole space can be harmonious and unified. 3. Try to keep the colors within 2-3 types, and use them repeatedly in other places of the space, not to mention four or five different wood finishes in a space, so that the whole space will not be too fancy, and it will appear more balanced. 4. If there are many different wood veneer textures in the space that make you feel at a loss, add some white

1. For mechanical crack prevention, we can use iron wire to bind the ends of the dried plates, and then use crack prevention rings, combined nail boards, etc. to prevent the expansion and contraction of the plates by mechanical methods, so as to avoid cracking of the wood. 2. The method of downward sawing in wood making is improved. Because there are differences in different directions of the plates, under the same temperature and humidity changes, the maximum coefficient of wet expansion and dry shrinkage is chord direction, then radial direction, and finally longitudinal direction. Therefore, we should cut more radial cut plates to avoid cracking to a certain extent. 3. Applying waterproof coating In order to avoid cracking of the board, we can apply waterproof coating on the end and surface of the board to slow down the evaporation intensity of the wood surface, which can reduce the cracking of the wood to a certain extent. 4. Using high temperature qualitative treatment, we also

1. Plywood not only has all the advantages of natural wood, such as light bulk weight, high strength, beautiful texture, insulation, etc., but also can make up for some natural defects of natural wood, such as knots, small breadth, deformation, large vertical and horizontal mechanical differences, etc. 2. Plywood production can make rational use of logs. Because it has no sawdust, every 2.2-2.5m3 of logs can produce 1m3 of plywood, which can replace about 5m3 of logs to be sawn into boards. Every 1m3 of plywood products can produce 1.2-1.5m3 of residues, which is a good raw material for producing MDF and chipboard. Plywood has the advantages of small deformation, large format, convenient construction, no warping, and good horizontal tensile resistance. Therefore, this product is mainly used in furniture manufacturing, interior decoration, and various boards for residential buildings.

Density board (also known as "fiberboard") is a kind of man-made board made of wood materials such as tree trunks, branches or other plant fibers as raw materials after hot grinding (grinding into powder), sizing (urea formaldehyde resin or other applicable adhesives), drying, paving and hot pressing. Advantages: all kinds of wood veneer, adhesive tape film, veneer, light metal sheet and other materials can be glued on the surface of the density board; Various coatings and paints can also be applied on the density board, and the effect is very beautiful. After punching and drilling, the hard density board can also be made into sound absorption board. The surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and it is easy to shape, avoiding problems such as decay and moth eaten. Excellent physical performance, good nail holding force, uniform material, no dehydration problem. Disadvantages: It is not moisture-proof, swells when it sees water, and bears load for a long time

Multilayer board is one of the commonly used materials in furniture processing enterprises, which is a kind of man-made board. A group of veneers is usually glued with each other perpendicular to the grain direction of adjacent layers. The surface and inner layers of multilayer boards are symmetrically arranged on both sides of the central layer or core. A slab made of glued veneers in a crisscross pattern in the direction of wood grain and pressed with or without heating. The number of layers is generally odd, and a few are even. There is little difference in physical and mechanical properties between vertical and horizontal directions. Commonly used are plywood, five plywood and other multilayer boards. Multilayer board can improve the utilization rate of wood, which is a main way to save wood. It can also be used as functional materials for aircraft, ships, trains, automobiles, buildings, packing crates, etc. Multilayer boards, also known as plywood and plywood, are called differently according to the number of layers. According to the thickness of 3-9mm

Many plywood sold on the market will always have different levels of color drop changes during long-term use. The key to extending the service life of the field frequency is the maintenance and attention in the subsequent operation. 1. In order to prevent discoloration and mildew of plywood skin, attention should be paid to damp proof, avoid excessive humidity indoors, and prevent soaking and rain. The paint construction must be thorough and correct. When decorating the wall, the wooden frame should be nailed to prevent the panel from being directly installed on the cement and brick wall to avoid moisture and mildew. 2. The plywood shall be prevented from cracking and cracking after decoration. Avoid long-term direct sunlight or excessive dryness in the room. The panel surface should not face the air outlet of the air conditioner or the side of the heating hood, so that the panel skin may crack due to excessive dryness, affecting the service life of the panel. 3. When cleaning, gently wipe with a dry cloth or a twisted rag,