FTC300 thermal conductivity hydrogen analyzer

FTC300 thermal conductivity Hydrogen analyzer |Thermal conductivity helium analyzer

FTC300 thermal conductivity helium analyzer        FTC300 thermal conductivity argon analyzer         FTC300 thermal conductivity hydrogen analyzer

Messkonzept FTC300 thermal conductivity hydrogen analyzer | thermal conductivity helium analyzer | thermal conductivity argon analyzer, using the thermal conductivity principle, the same analyzer can be set to test 16 components of binary gas components. Meskonzept's FTC300 thermal conductivity gas analyzer tests the gas of each binary component with a range of 0-100% Vol, a resolution of 1ppm and an accuracy of 0.5% FS. Meskonzept thermal conductivity gas analyzer has a very fast response time of 1 second (T90). After calibration, Meskonzept FTC300 thermal conductivity gas analyzer can be used for binary gas in a specific range. Messkonzep thermal conductivity gas analyzer can measure in high humidity and corrosive gas after special film treatment. Product line Including FTC300 thermal conductivity hydrogen analyzer, FTC300 thermal conductivity helium analyzer and FTC300 thermal conductivity argon analyzer.

Messkonzept's FTC300 Thermal conductivity gas analyzer characteristic:

·Contains FTC300 thermal conductivity hydrogen analyzer, FTC300 thermal conductivity helium analyzer, FTC300 thermal conductivity argon analyzer, etc

Binary gas components of 16 components can be tested through setting

·Up to 6 power linear fitting, with very high precision, reaching

·The range of isolated 4-20mA output can be set arbitrarily within the range of 100 Vol.%

·Free setting start and end

·Classic 2-point calibration or single point gas calibration

·The display screen can be freely set to display ppm or Vol.% with a resolution of 1ppm

·Can be used for external signal input and internal calculation of cross sensitivity compensation

·  Rapid response, T90 response time is less than 1s (depending on the flow)

·Pressure resistant (20bar) and vacuum sealed stainless steel (LF316i) gas conduit

·The three isolation relays display alarm and instrument status respectively

·In the whole 100Vol.% Within the range, the digital output reaches 1 ppm resolution

·PC based Cheng Xun simplifies all settings, linearization and calibration.

·Small but powerful transmitter with aluminum shell, suitable for field operation (protection level is IP65)

·Dimensions: W 145X H 80 (without connector) X D 85 mm

·Power supply: 18V-36VDC/700mA

Messkonzept's FTC300 Types of gases that can be measured by thermal conductivity gas analyzer:

Measuring gas	Background gas	Basic range	*Small range	*Small compression range	Multi gas measurement
H two hydrogen	N two or air	0% - 100%	0% - 0.5%	98% - 100%	yes
H two   hydrogen	Ar	0% - 100%	0% - 0.4%	99% - 100%	yes
H two hydrogen	He	20% - 100%	20% - 40%	85% - 100%	On request
H two hydrogen	CH four	0% - 100%	0% - 0.5%	98% - 100%	On request
H two hydrogen	CO two	0% - 100%	0% - 0.5%	98% - 100%	On request
He helium	N two or air	0% - 100%	0% - 0.8%	97% - 100%	yes
He helium	Ar	0% - 100%	0% - 0.5%	98% - 100%	yes
CO two carbon dioxide	N two or air	0% - 100%	0% - 3%	96% - 100%	yes
CO two carbon dioxide	Ar	0% - 60%	0% - 10%	-	yes
Ar argon	N two or air	0% - 100%	0% - 3%	96% - 100%	yes
Ar argon	O two	0% - 100%	0% - 3%	96% - 100%	yes
Ar argon	CO two	40% - 100%	-	80% - 100%	yes
CH four methane	N two or air	0% - 100%	0% - 2%	96% - 100%	yes
CH four methane	Ar	0% - 100%	0% - 1.5%	97% - 100%	yes
O two oxygen	N two	0% - 100%	0% - 15%	85% - 100%	yes
O two oxygen	Ar	0% - 100%	0% - 2%	97% - 100%	yes
N two nitrogen	H two	0% - 100%	0% - 2%	99,5% - 100%	yes
N two nitrogen	Ar	0% - 100%	0% - 3%	97% - 100%	yes
N two nitrogen	CO two	0% - 100%	0% - 4%	96% - 100%	On request
NH three ammonia	H two	0% - 100%	0% - 5%	95% - 100%	On request
NH three ammonia	N two	0% - 100%	0% - 10%	60% - 100%	On request
CO carbon monoxide	H two	0% - 100%	0% - 2%	99% - 100%	On request
SF six Sulfur hexafluoride	N two or air	0% - 100%	0% - 2%	96% - 100%	On request

Messkonzept's FTC300 Technical parameters of thermal conductivity gas analyzer:

Overall dimensions (excluding joints); weight	145mm x 80mm x 85mm; max.  1800g
power supply	24V DC (18V to 36V), 700mA
Ambient temperature range	-5°C to 50°C, other on request
linear	< 1% range
Warm up time	about 30min; 1h (small range)
flow	0.7L/min ~2.5L/min; 1.0L/min ~1.3L/min (Recommended)
Response time（ T90 ）	<1sec  @1.0L/min
noise	< 1% *Small range
Zero drift	< 2% *Small range, weekly
Repeatability	< 1% range
Error caused by ambient temperature change	< 1% *Small range, each 10°C
Error caused by flow change, @1L/min	< 1% *Small range, per 0.16L/min
gas pressure	Max. 2MPa (20bar)
Error caused by pressure change, (800hPa abs above )	< 1% *Small range, per 10hPa

Messkonzept's FTC300 thermal conductivity analyzer （ FTC300 thermal conductivity hydrogen analyzer, FTC300 thermal conductivity helium analyzer, FTC300 thermal conductivity argon analyzer, etc ） Consult us for details.

Photoacoustic spectroscopy nitrogen dioxide analyzer (NO2)                            Quantum cascade laser ammonia Gas analyzer (NH3)

Quantum cascade laser laughing gas analyzer (nitrous oxide, nitrous oxide, N2O)                Quantum cascade laser formaldehyde analyzer （CH2O）

Chemiluminescence nitrogen oxide analyzer/chemical fluorescence NOx analyzer