Water fuel oxyhydrogen water welding machine, that is, the machine that generates oxyhydrogen gas from water electrolysis as fuel, is another name of oxyhydrogen water welding machine, and also has the names of oxyhydrogen machine, oxyhydrogen flame welding machine, water fuel oxyhydrogen welding machine, etc. It is a different name of the same oxyhydrogen water welding machine in different application fields.
The principle of Jindian series hydrogen oxygen water welding machine/water fuel hydrogen oxygen machine is that hydrogen oxygen gas generated by DC electrolysis is burned, and flame welding is carried out by using the high temperature of hydrogen oxygen flame. The characteristic of Jindian oxyhydrogen flame is that the combustion product is water vapor, which will not produce black smoke when welding with oxyhydrogen flame, and will not pollute the welding parts. Compared with other carbon containing gases, oxyhydrogen flame is clean and environmentally friendly.
1、 Jindian hydrogen oxygen water welding machine /Operating principle structure diagram of water fuel oxyhydrogen welding machine
2、 Advantages of oxyhydrogen welding
1. Hydrogen oxygen flame welding takes water as raw material, and the product after combustion is water vapor, which will not pollute the environment.
2. The oxyhydrogen flame water welding machine generates oxyhydrogen gas through water electrolysis, which is produced and used immediately, and does not store gas, which indirectly avoids the potential risk of gas storage in gas tank. The water fuel oxyhydrogen water welding machine is equipped with a multi-channel safety anti backfire safety device. Even if there is some misoperation, it can also increase the safety factor by virtue of no redundant stored gas and multi-channel anti backfire device.
3. There is no need to purchase and transport bottled gas, as long as there is electricity and water, it can be used normally.
4. The oxyhydrogen flame is carbon free, which will not cause other pollution after welding. The characteristic of oxyhydrogen flame is that the flame is concentrated and does not diverge. The temperature of oxyhydrogen flame can reach 2800 ℃, which can realize rapid and precise welding of oxyhydrogen flame without affecting surrounding workpieces. It is efficient and fast.
3、 Present Code Parameters of 305TL hydrogen oxygen water welding machine
Embrace sustainable development and keep evolving Me! Jindian 2022 305TL oxyhydrogen water welding machine comes into the market, enabling intelligent change of oxyhydrogen water welding machine.
305TL hydrogen oxygen water welding machine is a new digital hydrogen oxygen water welding machine in the 305 model of Jindian series. It is equipped with a new single-chip microcomputer control technology, which is sensitive to start and stable to produce gas. At the same time, double backup IGBT modules are configured, with normal current and stable flame, making the welding process easy. Beautiful appearance and good protection.
Present Code 305TL hydrogen oxygen water welding machine Product specification:
Gas production rate: greater than 300 l/h
Nameplate: Jindian 305TL hydrogen oxygen water welding machine
Electrolytic current: 12A ± 15% DC electrolysis ()
Electrolytic voltage: 24V±15%
4、 Maintenance and precautions of hydrogen oxygen flame water welding machine
1. Add water in time to avoid working at low water level for a long time. When the machine emits beeps, the user should add water in time. When adding water, open the water feeding nut according to the steps of turning off the fire, turning off the machine, and venting. Add an appropriate amount of water into the water replenishing cylinder of the oxyhydrogen water welding machine. When adding water, the water level can be observed, which is generally half the height of the water level scale.
2. Through the observation of the transparent water level tube on the front panel of the machine, when the color is deepened and yellowed, it indicates that the electrolyte needs to be replaced in time.
Before changing the electrolyte, the electrolytic cylinder shall be cleaned for many times. See the operation manual of modern hydrogen oxygen water welding machine for specific operation steps.
3. Clean the dust inside the machine regularly. Open the side panel of the machine, use compressed air to clean the dust and other sundries accumulated on the switch power supply surface, and ensure that the electronic components inside the machine operate at a reasonable temperature.
Jindian oxyhydrogen water welding machine is safe, economical and high-quality.