The button type salt spray corrosion test chamber has the product description made by Nanjing Annai Test Equipment Co., Ltd
The equipment is widely used in enterprises and institutions such as electricians and electronics, aerospace, automobiles and motorcycles, electricians and electronics, chemical metallurgy, quality inspection and measurement, posts and telecommunications, ships and railways, as well as colleges and universities and scientific research institutions.
The equipment is used to simulate the weather environment and marine climate, and is used to test the protective layer of metal products and other products in a simulated salt fog environment; It refers to the accelerated corrosion of materials or products under certain temperature and relative humidity by using salt containing solution or acid salt containing solution to test the damage degree of materials or products within a certain time range.
The salt spray test has been taken as the national standard in China and has been specified in detail. It has developed from the initial pure neutral salt spray test to acetate spray test, copper salt accelerated acetate spray test, alternating salt spray test and other forms.
Reference standards
The salt spray corrosion test equipment shall be manufactured in strict accordance with the national jun salt spray test standard GJB 150.11 issued by China and the standard GB 2423.17 for salt spray test of electrical and electronic products;
Meet the salt spray test standards for metal coatings GB 6458, GB 6459, and GB6460;
Meet the salt spray test standard GB 5938 GB 5939、GB 5940;
It shall meet the salt spray test standard GB 1771 applicable to paint layers and other international standards on salt spray corrosion currently in use.
Equipment meets the test method : neutral salt spray test (NSS test)
Salt spray test (SS test)
Acetate spray test (ASS test)
Salt spray test methods such as copper accelerated acetate spray test (CASS test);
Button type salt spray corrosion test chamber Standard specification and model
Equipment name
|
Solar module salt spray corrosion test chamber, salt spray chamber, salt spray test chamber, salt spray test machine, salt spray water spray test machine
|
Note
|
1. The following equipment data shall be measured under the ambient temperature (QT) of 25 ℃ and the working room without load; 2. Various non-standard salt spray corrosion test chambers can be customized according to the specific requirements of users
|
Model
|
YWX-150
|
YWX-250
|
YWX-750
|
YWX-010
|
YWX-016
|
YWX-020
|
studio
size
|
450×600
×450
|
600×900
×500
|
750×1100
×500
|
850×1300
×600
|
850×1600
×600
|
1000×2000
×600
|
Overall dimension (length × W × H) mm
|
1100×650
×1030
|
1450×820
×1170
|
1640×1020
×1260
|
2050×1120
×1370
|
2250×1120
×1370
|
2650×1270
×1420
|
Power (kw)
|
one point five
|
two point eight
|
three point one
|
five point four
|
six
|
eight
|
nature
can
finger
mark
|
Test temperature
|
35℃~50℃
|
Saturator
temperature
|
37℃~63℃
|
Fluctuation/uniformity
|
±0.5℃/±2℃
|
Settlement
|
1~2mL/ 80cm two ·h
|
relative humidity
|
95~98%R. H
|
Humidity deviation
|
+2、-3%R. H
|
an electric appliance
Operation control system
|
control apparatus
|
Domestic / Imported intelligent temperature controller with high-precision digital display PID Microcomputer control, control accuracy: ± zero point one ℃
|
Time relay
|
0.1~99 H.M.S can set the spray stop time arbitrarily
|
Timing function
|
0.1~999.9 (S, M, H) adjustable
|
Output mode
|
Pulse solid state relay (PID+SSR) output;
|
sensor
|
Platinum resistance PT100 Ω/MV
|
Pneumatic components
|
Imported high-quality pneumatic components, two-stage air pressure filtration
|
heating system
|
U-type titanium alloy corrosion-resistant nickel chromium heater
|
protection system
|
Leakage, short circuit, test over temperature, test water shortage protection, salt water level prompt, saturator water level prompt
|
Spray mode
|
Tower spray, wall mounted baffle spray, gap spray
|
Use environment
|
Ambient service temperature ≤ 75%
|
Equipment and materials
|
Liner material
|
PVC/PP rigid plastic sheet
|
Case cover material
|
Imported transparent PVC hard board
|
Saturator
|
SUS304 stainless steel round pressure vessel
|
Sealing mode
|
Water tank partition sealing mode
|
Standard configuration
|
2 sets of corrosion-resistant "O" and "V" sample racks, fog exhaust hoses, standard glass fog collecting measuring tools, quartz nozzles
|