Supply of Max acrylic high crack resistant waterproof coating

Product Overview:
This product is made of pure Acrylic acid Main raw materials, adding active chemicals and high quality filler Single component water emulsion prevention made by compounding
water coating 。 With strong adhesion, it can be directly brushed on the metal tile surface; Super elastic, cracks within 3mm can be repaired directly.
Scope of application:
Roofs, metal tiles, internal and external walls, toilets window Platform, pool, basement, etc.
usage method:
Clean the base surface to remove oil stains, moss and loose parts, which must be flat and firm; Sand holes and uneven places, greater than 3mm
The cracks must be filled and leveled with Mikass leak stoppage king or quick setting water; The wall corner and the periphery of the pipe orifice shall be made into an arc shape.
Paint once within 10cm of both sides of the crack, and then paint the second time after the surface is dry (the surface is not sticky)
Apply polyester non-woven fabric while painting. After the surface is dry, apply it twice in turn.
matters needing attention:
Please read the packing instructions carefully before construction.
Construction shall not be carried out in rain, with open water or below 5 ℃.
It is not allowed to add water for dilution, so as not to affect the waterproof effect. The unused paint shall be covered tightly and sealed for storage.
If the air is too humid or not ventilated, ventilation equipment shall be used to accelerate the drying of coating.
Storage method:
This product should be stored in a cool, ventilated and dry place. It can be stored for two years if not unsealed. It can still be used if there is no abnormality after the overdue cover opening.
Executive standard: JC/T864-2008
Reference dosage: The formation level is about 1.5kg/m2
Product packaging: 1kg/bottle (12 bottles per box)
5kg/barrel
18kg/barrel