Tianjin Baodi Anticorrosion and Waterproof Polymer mortar Price - manufacturer's telephone
Tianjin Baodi Anticorrosive Waterproof Polymer Mortar Price - Manufacturer Phone
Beijing Ruishengte Building Materials Co., Ltd
Contact: Manager Zhao
Mobile:***
WeChat:***
Q Q：394778306
Address: Shahe Town, Changping District, Beijing
**Polymer cement Reinforcing mortar It has high compressive strength, anti disassembly strength, large adhesive strength, alkali resistance, heat resistance, frost resistance, acid resistance, anti-corrosion and waterproof properties. The third-party test report is complete, welcome to call for consultation!
Scope of application:
1. Steel wire rope (steel strand) mesh of bridge structure - polymer mortar external layer reinforcement method matching * * mortar.
2. Steel wire rope (steel strand) mesh of beam, column, floor and other parts - polymer mortar external layer reinforcement method matching * * mortar.
3. Concrete structure reinforcement.
4. Repair and reinforce the cracks, holes, peeling and other parts of the building.
5. Concrete structure reinforcement of the plant with corrosive gas corrosion;
six wall Fiber reinforced polymer for ceiling and roof insulation benzene ethylene Reinforcing layer of insulation board;
7. Repair of concrete honeycomb, loophole, crack, protective layer damage, rebar leakage and other defects.
8. This product is a polymer mortar used in the "reinforcement method of wire rope polymer mortar".
9. This product is a polymer mortar used for "road and bridge repair, leveling and reinforcement".
10. This product can be used for all kinds of mortar waterproof works required for exterior walls of high-rise, multi-storey, middle and high-rise buildings, kitchens, toilets, balconies, floors, window surroundings, wall pipes, floors, ports, docks, roads, bridges, pools, water towers and civil buildings.
11. Bonding anti-corrosion stone.
technical parameter
Beijing polymer mortar - * * type - anti-corrosion repair mortar manufacturer
|
project
|
performance index
|
detection result
|
|
Bond strength
（Mpa）
|
7d
|
------
|
2.35 Mpa
|
|
(77d) Water resistance
|
------
|
2.02 Mpa
|
|
28d
|
≥2.5Mpa
|
2.76 Mpa
|
|
compressive strength
（Mpa）
|
7d
|
------
|
30.00 Mpa
|
|
28d
|
≥55 Mpa
|
57 Mpa
|
|
Bending strength (Mpa)
|
28d
|
≥12 Mpa
|
13 Mpa
|
Note: The test blocks were immersed in sulfuric acid solution with PH=2, 2% hydrochloric acid solution, 10% sodium hydroxide solution and saturated sodium oxide solution for one year, without shedding and leakage.
construction
·Base treatment:
(1) Remove the floating ash on the surface, remove the loose parts, and there shall be no accumulation of water or a large amount of oil stain. If the base course is sanded or has low strength, the base course shall be hardened first.
Ruishengte** polymer mortar
(2) When the one-time construction area is large, construction joints shall be reserved or staggered construction shall be carried out. The area of each piece should not exceed 10 ~ 15m two , depending on the site environment. The interval time for patching or staggered construction shall not be less than 24h.
(3) The construction temperature should be above 5 ℃, not in rainy days or freezing days.
· Material preparation:
Put Material A Shake well, then Press Material A ： Material B =1: 6 mix and fully stir to form a uniform slurry. Reference dosage 2000kg/m three The prepared material should be 1 ~ Use up within 2 hours 。
· Local repair of defect:
According to the construction requirements, Use a spatula to apply the prepared mastic to the repaired part. When applying, it should be compacted and polished. It can be put into use 7 days after completion.
· Large area integral surface plastering construction:
When it is used as an integral surface course, the thickness shall not be less than 3mm. When the integral surface course is made on the facade of concrete or masonry structure and the surface of steel structure, it shall be carried out in two times, and the interval between each time shall not be less than 24h. When the later plastering is carried out, it shall be leveled at one time and repeated plastering is not allowed.
·Construction of ground abrasion resistance improvement treatment:
Apply the mixed glue on the ground to be repaired, and the thickness should not be less than 3mm. Curing after construction, 2 ~ You can get on people in three days and heavy loads in seven days.
Packaging and storage
Material A: 20kg/barrel, stored in a dry and ventilated place above 0 ℃, free from exposure and freezing, with a shelf life of 6 months;
Material B: 50kg/bag, protected from rain forest and moisture, with a shelf life of 6 months.
Tianjin Baodi Anticorrosive Waterproof Polymer Mortar Price - Manufacturer Phone
