Industry trends

Linyi powder rebar rust inhibitor manufacturers sell rebar rust inhibitor directly, which can promote the rebar surface to produce a layer of y-Fe2O3 or Fe3O4 oxide passivation film, and repair the defects on the rebar surface, so that the entire rebar is wrapped by a layer of oxide passivation film, with good compactness and stability, which can prevent the penetration of chloride ions, reduce the free speed of iron ions, so as to achieve the purpose of rust prevention. Classification of rebar rust inhibitor: mixed rebar rust inhibitor (powder), permeable rebar rust inhibitor (liquid). 1、 Product features: 1. Prevent or delay the corrosion of reinforcement, thus extending the service life of the structure; 2. Significantly improve the compressive strength of concrete

2024/01/24 12:37:19

Fuyang rebar rust inhibitor concrete mixing type 1. Product introduction Rebar rust inhibitor is a kind of rebar rust inhibitor, which can prevent or delay rebar corrosion when mixed into the concrete, thus extending the service life of the structure. In the classification, it belongs to the "mixing type". This product is suitable for concrete made of ordinary silicon and slag cement, and has good compatibility with fly ash, slag powder, silica fume and common water reducing agent. This product is selective to air entraining agent. When it is used above 25 ℃, it has obvious early strength, accelerating coagulation, and has impact on slump loss. If necessary, retarding measures can be taken. It forms a dense protective layer on the surface of reinforcement, when harmful ions invade

2023/12/28 16:24:51

Road and bridge concrete surface reinforcer rebound strengthening liquid Concrete surface reinforcer can rapidly react with free calcium in the concrete through full penetration, increasing the compactness of the structure, making the concrete surface form a solid entity as hard as a chimestone, greatly improving the strength and wear resistance of the concrete structure surface, so as to obtain a better sealing, firmness A surface that is resistant to abrasion, dust, water and most industrial chemicals. Maturation plugging will not wear away as the surface coating with use. This product will make the concrete harder and harder and the plugging performance better because it can lock the pores well. 1、 Apply

2022/08/19 13:16:46

The two-component * * polymer emulsion modified cement mortar is a kind of polymer repair and reinforcement mortar made by the factory processing of modified * * polymer emulsion, chemical additives and hard dry mixture. It has * * crack resistance, impermeability, high strength and good cohesion, and is suitable for various complex environments and smooth base construction. This product can protect the reinforcement in the repaired concrete from erosion, and improve the ability to resist carbonization and chloride ion penetration. Polymer repair mortar product introduction This product is a polymer repair and reinforcement mortar made by factory processing of modified * * polymer emulsion, chemical additives and hard dry mixture. It has * * crack resistance and resistance to

2020/04/05 13:35:00

Main uses of new and old mortar concrete interface agent manufacturers: 1. New and old concrete connection: this product is an ideal bond for new and old concrete interface connection, commonly used in construction joints, beam column reinforcement, old foundation reconstruction and other projects. 2. Repair treatment of concrete sanding base course: this product can be used to repair sanding, pitted surface, exposed reinforcement, etc. on the concrete surface. 3. Concrete surface protection and moisture-proof treatment: This product can be used for surface protection of concrete and reinforcement to prevent deterioration and corrosion. Or it can be used as the moisture barrier of the oily coating, which is firmly combined with the polyurethane soil layer. 4. Plastering or brick board pasting construction on occasions requiring acid and alkali corrosion resistance: this product can be used

2020/04/05 13:09:04

Anti sticking coating has low cost, easy construction, fast drying and environmental protection * * strong adhesion. Anti sticking 1. Technical route With the development of society, people put forward higher and higher requirements for the comprehensiveness of the coating, and the decoration of the coating is increasingly valued. Since the stain resistance of coatings is critical to the decorative properties of coatings, it has become a very important indicator to measure the quality of coatings (especially architectural coatings). The stain resistance of the coating is first related to the properties of the coating itself, such as the film density, surface energy, hydrophilic and lipophilic properties, smoothness, surface hardness, etc; Secondly, it is related to the environment, such as temperature, humidity, dust volume, chemistry

2019/07/01 10:35:01

Oily epoxy mastic Epoxy mastic is mainly classified into modified emulsion epoxy and pure oily epoxy. Please consult the sales staff when selecting products according to your requirements! You can increase the cost! The brand features impermeability, salt resistance, alkali resistance, weak acid corrosion resistance, and strong adhesion with a variety of materials. Origin: Beijing specification 20KG/barrel resin mastic. Scope of application: repair of honeycomb holes on concrete texture, leveling of anti-corrosion lining of chimney, pasting of acid resistant brick granite, and leveling of anti-corrosion repair of underground pipeline of sewage tank drainage ditch, biogas tank. Product Description: This product is based on modified saturated epoxy resin, curing agent

2019/07/01 09:28:47

The product description of the bridge waterproof and anti-corrosion silane impregnant seller This product is high-purity isobutyl triethoxysilane, which can penetrate into the concrete and react with the air and water molecules exposed to acid and alkaline environment to form a water repellent layer, producing waterproof, anti CL, anti * * * performance. It can effectively prevent the corrosion of concrete caused by sunshine, acid and alkali, sea water and salt mist, so as to protect the internal reinforcement structure of concrete from corrosion. This product is mainly used in highway bridge structures, port wharves, marine engineering, overpasses, power poles, sewage treatment pools, plateau areas with large temperature difference, etc. It is recommended by the national concrete corrosion prevention specifications

2019/06/28 14:54:40

Polymer modified epoxy C50 grouting material * * non shrink product features (1) * * early strength: physical and mechanical properties such as compression resistance and bonding are far superior to ordinary cement-based grouting materials. (2) Self fluidity: it can fill all the gaps and meet the requirements of secondary grouting of equipment. (3) No shrinkage: ensure close contact between equipment and foundation, and ensure high-precision installation needs. (4) Emulsion epoxy cement base: epoxy resin and high-quality cement work together, which has strong durability and meets the requirements of green environmental protection. (5) Corrosion resistance: It can withstand long-term contact corrosion of chemicals such as acid, alkali, salt, grease, etc. (6) Creep resistance: in harsh materials

2018/11/07 09:35:49

Please read the detailed description of polymer secondary grouting materials produced by our company next, thank you! CGM-1, 2, 3, 4, C80 superfluid epoxy resin type * * non shrink grouting material [For more questions, please call] Note: polymer secondary grouting material can be prepared and processed according to customer requirements. 1. Main classification of grouting material [CGM-1] General reinforcement type: anchor bolt anchoring, rebar cutting, secondary grouting for foundation with a thickness of 30mm. [CGM-2] Beanstone grouting material: secondary grouting for equipment foundation with grouting layer thickness ≥ 150mm. Beams, slabs

2018/11/07 09:25:12