Architecture wall Thermal insulation is divided into external thermal insulation of building exterior wall, internal thermal insulation of building exterior wall, internal thermal insulation of building interior wall and external thermal insulation of building interior wall. These different wall thermal insulation are to increase the thermal resistance of the wall, improve the thermal insulation rate of the wall, make the wall impervious to cold, and prevent cold bridges and condensation water. For example, the internal insulation of the building wall, the protection position is only inside the internal wall and beam of the building. The external wall corresponding to the internal wall and plate cannot be protected by materials. The heat transfer is fast, so a cold (hot) bridge is formed in this part. Meanwhile, Zhisheng Weihua is insulated Thermal insulation coating Relevant people proposed that the thermal insulation cold (hot) bridge in the building wall has a large area, which is a low efficiency form of energy conservation. Due to the heat loss, the temperature of the cold (hot) bridge is very different from that of the non cold (hot) bridge.
A good building wall thermal insulation material should have many advantages and market share. The following mainly introduces the thermal insulation paint for internal insulation of building walls, a good thermal insulation material, low thermal conductivity, waterproof and moisture-proof, fire retardant and flame retardant integrated thermal insulation paint, model ZS-211, reflective thermal insulation coating , water-based environmental protection, no volatile matter generation, increase the wall thermal insulation rate by more than 90%, effectively prevent the wall and roof from permeating cold, resulting in low indoor temperature, and the construction of building wall thermal insulation paint milky white light paste is convenient and simple.
The building wall insulation mainly takes measures from the inside and outside protective structures of the building to reduce the indoor heat emission to the outside, which plays an important role in creating a suitable indoor thermal environment and saving energy. ZS-211 Reflective thermal insulation coating can form a three-dimensional network hollow structure connected by closed micro beads on the surface of the building wall nanometer hollow ceramics The static air groups sandwiched one by one are formed between the beads, that is, the thermal insulation units - Cold and heat exchange blocking, Zhisheng two hundred and eleven Thermal conductivity of reflective thermal insulation coating 0.04W/m.K , can effectively prevent heat conduction, and the thermal insulation level of the coating reaches R-30.1 , thermal reflectance is 90% above, ZS-211 Reflective thermal insulation coating, thermal insulation and soothing efficiency can reach 90% Left and right, can keep in the room 70% The above heat is not lost. ZS-211 Reflective heat insulation coating is applied on the building wall, which can effectively prevent cold and cold, and has high cold air shielding rate three Above mm, the thermal insulation rate reaches 90% , can increase indoor temperature in winter five Above ℃. The good performance of Zhisheng building wall thermal insulation coating can not be replaced by thermal insulation materials, which plays a decisive role in the technical improvement of painting materials. Energy saving, stability, and science and technology have never been seen before. For the development of the whole society, it is a truly epoch-making thermal insulation material.
