How to deal with the sewage well leak repair

How to deal with the sewage well leak repair Handling and The following steps can be referred to for the sewage well in the leakage catcher:

1. Find the leakage point: observe whether there are cracks in the well wall, or Whether there are other leakage places, these can be used as leakage points.
2. Crack cleaning: once the leakage point is determined, the crack shall be cleaned to ensure its surface is clean.
3. Brush penetrant: Brush penetrant (i.e. paint) several times at the crack to better cover the crack.
4. Press in leak repair material: press the pre prepared material into the crack through a tool so that it can fill the crack.
5. Curing: wait until the leak repair material is completely dry, and then use clean water for curing to ensure that no leakage occurs again.

For the treatment of water collecting wells, the problem of water control and collection needs to be considered to ensure that surface water and groundwater can be effectively controlled and discharged, and some waterproof facilities can be installed , such as waterproof wall, waterproof door, etc.

The above steps are for reference only. Please note that necessary measures must be taken in the process of sewage well treatment and leak repair, such as wearing safety equipment, wastewater treatment, etc., to protect the environment and health 。 If you are not familiar with the relevant operations, you can seek the help of professionals. How to deal with the sewage well leak repair