Treatment scheme for water leakage and leakage stoppage of culvert cover slab Grouting and leakage stoppage treatment of pedestrian walkway

Treatment scheme for water leakage and leakage stoppage of culvert cover slab Grouting and leakage stoppage treatment of pedestrian walkway culvert The following methods can be referred to for the treatment scheme of cover plate leakage and the grouting treatment of pedestrian walkway:

1. Find out the leakage of culvert cover plate The water causes shall be repaired accordingly.
2. If the cracks are caused by uneven settlement of the foundation under the cover plate, the cracks need to be reinforced Mark one meter on both sides of the gap, and then fill it with cement mortar for reinforcement.
3. If the water leakage is caused by cracks in the cover plate due to aging, it is necessary to replace the aging part. Note that all the original covers must be replaced during construction.
4. If grouting method is used to strengthen the leakage of foundation and cover plate, epoxy resin and other grouting materials can be used for grouting, After grouting, the foundation can be effectively strengthened to avoid other problems later.
5. For grouting and plugging of pedestrian walkways, the accumulated water can be removed first, and then cement mortar can be used to strengthen and harden the ground. For the crack part, professional tools can be used to seal it, and then appropriate grouting materials can be selected for grouting treatment.

The above scheme is only for reference, and the specific situation may vary due to different site conditions, so it is recommended to consult professional engineers and handle according to the actual situation. Treatment scheme for water leakage and leakage stoppage of culvert cover slab Grouting and leakage stoppage treatment of pedestrian walkway