V Electronic lock DSCK7757 specifications and parameters are as follows:
Executive standard: GJB-9001B
1. Electrical parameters:
Rated parameters
Voltage: DC12V
Current: 2.0A (at DC12V 20 ℃)
Power: 24W
DC resistance: 6 Ω± 5%
Ambient temperature: - 20 ℃~70 ℃
Insulation class: Class B
Duty cycle: 10% energized (Electrify 10%)
Withstand voltage: AC500V (50/60Hz) 1Sec (breakdown current 0.5mA) between coil and frame
Temperature rise: under the rated voltage of DC12V, the temperature rise is 65 ℃ Max (power on for 0.1s, power off for 0.9s)
Service life: typically 500000 times (power on for 0.1s, power off for 0.9s)
Terminal strength: 1KG, when 1kgf (in any direction) is applied, it is not allowed to fall off
Operating temperature: - 20 ℃~70 ℃
Ambient humidity: 5% RH - 85% RH
Power on mode: instantaneous trigger
Single power on duration: 400ms-2000ms (the working mode of this cabinet lock is instantaneous power on trigger
The coil is easy to age or burn out after continuous single power on for more than 5 seconds. Recommended single power on duration: 1000ms, power on interval: ≥ 15s)
Tel:***
Mobile: * * ****
Contact: Mr. Xue
Company address: Yuxiang, Xi'an, Shaanxi door 2083 Wai Wei Lan All Mechanical and Electrical Plaza
Ali Wangpu: https://shop ***64.1688.com
Note: This electronic lock switch The state is realized by the touch pressure micro switch device of mechanical structure, The technical parameters of the built-in microswitch are as follows :
Rated value: higher 250VAC
Operating temperature: T 55
Action life: ≥ 500000 times
According to pressure: 1.47 N
Rated impulse withstand voltage: 2500V
See Attached Table III for the test report of microswitch: test report of built-in microswitch
2. Elastic specification of electronic lock automatic pop-up door:
DSCK7757 Smart cabinet lock | weak | Applicable to key locker |
in | Applicable to 15CM * 15CM left and right cabinet doors |
strong | Applicable to 30CM * 30CM left and right cabinet doors |
strengthen | Applicable to 50CM * 50CM left and right cabinet doors |
Note: The default is strong specification, the closing force is 22.55 N, and the opening force is 14.7 N
The applicable specification is based on the materials used for the door of the general express cabinet, and the specific demand elasticity shall be subject to the actual test effect.
3. Processing specification
Lock case material: iron based electrophoresis;
Weight: 200g;
Powder metallurgy parts:
Iron infiltrated copper alloy, hardness HRB50-60, blackening and oil immersion
Spring : Imported Korean elephant brand piano steel wire
Appearance process specification:
DSCK7757 intelligent cabinet lock | Conventional | plate with nickel |
Chrome plating |
Polished | plate with nickel |
Chrome plating |
Note: Conventional type is conventional complexing type