Ming'an UHSS168 9V separate smoke start emergency annunciator adopts photoelectric sensor controlled by MCU chip; 9V Battery Power supply, low power consumption. There is an undervoltage indication signal when the battery power supply is insufficient; Ming'an smoke fire start emergency annunciator can accurately detect indoor smoke through photoelectric smoke sensor. When the smoke concentration exceeds the limit of start emergency signal, start the emergency annunciator to send audible and visual alarm signals. The smoke fire start emergency annunciator is applicable to the smoke fire monitoring alarm of indoor environment such as residential area, shopping malls, hotels, restaurants, leisure places, Internet cafes, office buildings, teaching buildings, banks, libraries, computer rooms and warehouses Start emergency annunciator H S Code: 85311000
Features of individual smoke sensing function:
*Ming'an 9V separate smoke fire start emergency annunciator
*Photoelectric sensor, high sensitivity;
*On site acousto-optic start emergency signal signal;
*Ultra thin structure design;
*SMT process manufacturing, strong stability;
*Simple and convenient installation;
*Low voltage alarm prompt;
*Production standard: GB4715/EN
Technical parameters:
*Working voltage: DC9V;
*Static current: ≤ 10uA;
*Start emergency signal current: ≤ 15mA;
*Working temperature: - 10 ℃~50 ℃;
*Operating temperature: ≤ 95% RH;
*Start emergency signal mode: audible and visual start emergency signal;
*Overall dimension: 107mm * 35mm
*Packing method: 1 piece/color box, 100 pieces/box
Ming'an smoke start emergency annunciator implements the after-sales principle of 3-month replacement, 1-year warranty and lifelong maintenance; For the experience of our products pin Businessmen, agents, engineers, foreign traders, and end users provide solid after-sales support. Contact: Liu Yi, Tel: * * * Online chat: QQ: 1787961126
matters needing attention:
1. This product should not be installed in a cold and hot environment with high wind speed and a lot of smoke and dust.
2. The product shall be tested once a month.
3. To ensure the smoke sensitivity of the product, it needs to be cleaned with a soft brush every 6 months detector The surface must be disconnected before cleaning Power Supply 。
4. When the battery voltage is insufficient, the buzzer will emit a short "beep" every 40 seconds. To ensure the detection sensitivity of the detector, please replace the battery in time.
5. If you find that the detector does not work properly or is damaged, please do not disassemble it by yourself. You can contact the customer service center or the nearest agency, and professional personnel will be available to serve you.
6. Photoelectric smoke detectors can reduce the occurrence of disasters, but can not ensure that everything is safe. For your safety, please use this product correctly, and at the same time, you should be vigilant in daily life and strengthen the awareness of safety prevention.