major component The product is modified Chlorinated rubber Resin, various pigments, wear-resistant filler 、 auxiliary And solvent, etc coating 。 Main characteristics Hard paint film; Excellent weather resistance; Fast drying performance; High adhesion, good wear resistance. Main purpose Widely used inside and outside the home floor Wear resistant finish paint shall be applied. Technical indicators Appearance of paint film: the paint film is flat and smooth, and the color conforms to the standard template Drying time: standard thickness single coating, 25 ℃, Surface dry ≤ 1 hour, solid dry ≤ 12 hours Pencil hardness: ≥ HB Adhesion: ≤ 2 (circle drawing method, grade) Impact strength: 50kg · cm Bending test: ≤ 1mm Water resistant for 7 days: no blistering Wear resistance: ≤ 0.1g Packaging specification Paint: 20kg/hall, curing agent: 3kg/hall. Basic parameters Ratio: paint: thinner=2:1 (weight ratio) Construction time limit: 8h, (25 ℃) Theoretical dosage: 150~250g/m two Complete curing: 7 days Recommended coating number Wear resistant finish , Two coats, 65 ± 5 μ m/coat match set use paint As outdoor wear-resistant finish paint. surface noodles place reason The painting base shall be clean and free from all dirt such as oil stain and dust. apply pretend square method Airless spraying: diluent: XLZ special diluent Dilution rate: 0~15% (calculated by paint weight) Nozzle diameter: about 0.4~0.5mm Ejection pressure: 15~20Mpa Air spraying: diluent: XLZ special diluent Dilution rate: 20~40% (calculated by paint weight) Nozzle diameter: about 2.0~2.5mm Ejection pressure: 0.3~0.5Mpa Roller coating/brush coating: thinner: XLZ special thinner Dilution rate: 0~20% (calculated by paint weight) Storage Deposit stage limit Store the paint in a cool, dry and ventilated place for one year. notes meaning matter term one Read the instructions before construction; two Before use, the paint and diluent shall be mixed according to the required ratio, and the paint shall be mixed evenly before use; three Keep dry and clean during construction, and cover the curing agent packaging bucket tightly after paint preparation to avoid gelling; four During construction and drying, the relative humidity shall not be greater than 85%. The product can be delivered for use only after 2 days after coating. |