What you buy is not only a rock drill, but also a series of perfect services supported by the equipment. The national service network provides high-quality services for the vast number of mining equipment users.
characteristic:
1. Just move the handle as required to complete drill hole Or crushing operation.
2. The machine is easy to operate, more time-saving, labor-saving, and has the characteristics of fast chiseling speed and high efficiency.
3. At present, the machine has reached the high quality level of similar products, and can exchange parts with international similar products.
4. When drilling holes in rock, the vertical downward, horizontal upward less than 45 ° and vertical downward deeper drilling can reach 6m.
5. The main engine weighs only 27 kg and can be operated by only one person. It is convenient to carry and suitable for high mountains Power Supply No wind pressure equipment It is especially suitable for temporary projects with large mobility in the area of.
6. This machine can be used in high mountains, flat lands, hot areas of 40 ° or cold areas of minus 40 °. It has a wide range of adaptability.
7. This machine adopts the outlet packing All indicators meet export standards. It is very popular in the market because it only needs gasoline to operate without other auxiliary equipment!
8. This machine is suitable for iron ore, copper ore, nickel ore, lead zinc ore, gold ore, gem ore Granite 、 Bluestone 、 jade And other mines.
Purpose:
YN27C The internal combustion rock drill is widely used in mines, roads, quarries, buildings, road tamping, geological survey, national defense projects, etc.
technical parameter
Main engine weight 27 kg
Engine type Single cylinder air-cooled two-stroke gasoline engine
Carburetor type No float type
Ignition mode contactless system
Engine displacement 185 cm3
Engine load speed (measured when drilling five holes) ≥ 2450 r/min
Idle speed of drill rod ≥ 200 r/min
Tool shank size tool tail hexagon 22x108 mm
Drilling depth ≥ 6 m
Oil tank volume ≥ 1.14 L
Drilling speed ≥ 250mm/min
Mixing ratio of gasoline and lubricating oil (by volume) 8:1
Spark plug gap 1.5 mm
Oil consumption rate (measured when drilling five holes) ≤ 0.12L/M
Impact energy ≥ 25J