Punch Which is the best brand of punch
Jujia Machinery J23 series open type tilting press adopts rigid rotary key clutch It has single and continuous operation specifications, uses belt brakes, and the sliding block is equipped with a collapse protector. The protector collapses when overloaded, so as to ensure that the whole machine is not damaged. The body is tilting casting Structure, easy for stamping parts or waste materials to slide down from the die when tilted. The punch press has strong versatility. Equipped with automatic feeding device, semi-automatic stamping operation can be realized. Stamping production is mainly aimed at board Of. Can pass the mold, can make blanking, punching, forming, drawing, trimming, fine blanking, shaping, riveting and extrusion parts, etc., widely used in various fields. As we use switch Socket, cup, cupboard, dish, computer case, electronics, communication, computer, household appliances, furniture, transportation
Stamping and forming of (automobile, motorcycle, bicycle) hardware parts.
1. (1) High rigidity and high precision frame, welded with steel plate, and heat treated to eliminate the internal stress of the machine body, so that the equipment can work stably for a long time without deformation. (2) The load of structural members is uniform and the rigidity is balanced.
2. Stable high precision:
The crankshaft, gear, transmission shaft and other parts of the main components of the equipment have high wear resistance after hardening and heat treatment, and their long-term performance is stable, ensuring the requirements of high accuracy and stability.
3. Reliable and safe operation performance:
The reason why the operation is convenient and the positioning is accurate is that the Elmar press adopts a combination device of clutch/brake which is different from the traditional brake. In addition, the dual solenoid control valve and overload protection device common to all advanced equipment ensure the accuracy and safety of high-speed movement and stop of the press slider.
4. Production automation, labor saving and high efficiency.
The punch can be equipped with the corresponding automatic feeding device, with feeding error detection, pre cutting and pre breaking devices, which can fully realize automatic production with low cost and high efficiency.
5. Slider adjustment mechanism:
The sliding adjustment is divided into manual adjustment and electric adjustment, which is convenient, reliable, safe and fast, and the accuracy can reach 0.1mm.
6. Novel design and environmental protection.
Specification and model | Nominal force (KN) | Slider stroke (mm) | Travel times (times/minute) | Installation height (mm) | Mold height adjustment (mm) | Distance from slider center to body (mm) | Workbench size (mm) | Larger inclination (°) | Die handle hole size (mm) | Workbench thickness (mm) | Motor power (kw) | Overall dimension (mm) | Operating Weight (kg) |
J23-10 | one hundred | fifty | one hundred and forty | one hundred and fifty | forty | one hundred and thirty | Front and rear 230
Left and right 370 | twenty | φ30 | thirty | one point five | 880×560×1550 | four hundred |
J23-16 | one hundred and sixty | sixty | one hundred and forty | one hundred and seventy | forty | one hundred and fifty | Front and rear 280
Left and right 470 | thirty | φ35 | forty | one point five | 1000×650×1720 | eight hundred and sixty |
J23-25 | two hundred and fifty | seventy | seventy | two hundred | forty | one hundred and eighty | Front and rear 320
About 500 | fifteen | φ40 | fifty | two point two | 1100×800×2000 | one thousand three hundred and ten |
J23-40 | four hundred | one hundred | fifty | two hundred and thirty | sixty | two hundred and thirty | Front and rear 380
Left and right 630 | twenty | φ40 | seventy-five | three | 1400×1000×2300 | two thousand and five hundred |
J23-63 | six hundred and thirty | one hundred | fifty | two hundred and eighty | eighty | two hundred and sixty | Front and rear 450
Left and right 690 | twenty | φ60 | eighty | four | 1700×1200×2550 | three thousand and eight hundred |
J23-80 | eight hundred | one hundred and fifteen | forty-five | two hundred and forty | one hundred | two hundred and sixty | Front and rear 460
Left and right 750 | twenty | φ60 | ninety-five | seven point five | 2000×1300×2650 | four thousand five hundred and twenty |
J23-100 | one thousand | one hundred and thirty | forty-five | two hundred and forty | one hundred | three hundred and twenty | Front and rear 520
Left and right 810 | twenty | φ60 | ninety | seven point five | 1950×1400×2750 | six thousand and one hundred |
one thousand | one hundred and thirty | forty-five | two hundred and eighty | one hundred | three hundred and twenty | Front and rear 650
1020 left and right | fifteen | φ70 | one hundred and five | eleven | 2150×1550×3270 | nine thousand |
J23-125 | one thousand two hundred and fifty | one hundred and forty | thirty-five | two hundred and eighty | ninety | three hundred and twenty | Front and rear 650
1020 left and right | fifteen | φ70 | one hundred and five | eleven | 2150×1550×3270 | nine thousand and five hundred |
J23-160 | one thousand and six hundred | one hundred and sixty | fifty-four | three hundred | one hundred | three hundred and seventy | Front and rear 750
Left and right 1120 | fifteen | φ80 | one hundred and twenty | fifteen | 2200×1300×3100 | thirteen thousand |
