Brief introduction of combined cartridge filter:
ES-C-2-6 combined cartridge filter It is an energy-saving dust purification equipment. The combined cartridge filter not only has the characteristics of strong dust removal ability, high dust removal efficiency and low emission concentration of the jet pulse filter, but also has the characteristics of stability, reliability, low energy consumption and small floor area, especially suitable for handling the flue gas with large air volume. Widely used in mechanical processing, chemical production, powder recycling, building manufacturing, pharmaceutical production, food company production furniture Dust removal in production and hardware electronic processing industries. The combined cartridge filter dust remover is composed of several separate rooms. When cleaning the ash, each room is carried out separately in sequence, without interference with each other, so as to achieve long-term continuous operation.
Performance characteristics
1. The equipment is small in size and floor area, which effectively saves the use space;
2. The ash discharging mode of ash bucket, ash discharging car, screw discharging device, etc. can be selected;
3. The flexible box type combined unit module can meet different site installation conditions;
4. The imported PLC is used to control the adjustable pulse back blowing, and the differential pressure indicator is set;
5. The filter cartridge is placed horizontally in a connected way, and a single cover ensures safe operation and convenient maintenance of the equipment;
6. High purification efficiency of equipment; More than 99% purification efficiency for dust with particle size of more than micrometer;
7. The equipment can save energy, the running resistance is 500-800pa, the initial resistance is below 200pa, and the high resistance is 1500pa; (Determined according to the wind pressure of the system fan)
technical parameter
Model: ES-C-2-6
Number of filter cartridges: 6
Processing air volume: 3600-4800m3/h
Ash bucket volume: 0.125m3
Size: 1450 * 2570 * 1200
application area
The combined filter cartridge dust remover is mainly composed of upper box, middle box, ash hopper, ash unloading system, injection system and control system, and can adopt a variety of inlet chamber structures.
Dust laden airflow enters the dust remover from the side inlet or top inlet, and the dust is "intercepted" and gathered by the outer surface of the filter cartridge. The purified airflow flows out from the center of the filter cartridge to discharge, so as to achieve the purpose of purification. To clean the filter cartridge, use compressed air (0.6-0.7Mpa) to generate strong airflow through Solenoid valve The door is released to the center of the filter cartridge, and the dust accumulated on the outer surface of the filter cartridge is vibrated and blown down like a vibration wave and falls into the ash hopper below. In order to ensure the normal and continuous operation of the filter cartridge for dust removal, the PLC control system carries out backflushing according to the set procedure.
