The reinforcement processing shed is a place for straightening, bending, welding and other reinforcement processing operations on the construction site. The length and width of the reinforcement processing shed are generally determined according to the number of reinforcement processing and the number of machinery used. Generally, there are 6 * 12m, 9 * 12m, 18 * 30m, etc. The length and width can be designed according to the actual construction situation. The layout of the workbench of the reinforcement processing shed should also be reasonable, according to the real reinforcement processing process, as well as the storage of raw material reinforcement before processing and finished products after processing, so the ground of the reinforcement processing shed should be 30cm higher than the ground of the construction site to prevent rain soaking. When erecting with scaffold tubes, there should be ground cross bars and diagonal braces to ensure the stability of the processing shed.
2. Construction details of reinforcement processing shed on site:
The Eozhe reinforcement processing shed is made of standard steel. First, several steel pipes are buckled and erected into an integral steel structure of the processing shed at the site with fasteners. Then, diagonal braces and double-layer anti smashing structures are set to verify whether the strength of the steel structure meets the design requirements. Safety banners are hung on the railings. The entire reinforcement processing shed is standardized after construction. Full assembly type, fast assembly, simple disassembly, convenient transportation, profiles and accessories can be customized according to needs. At the same time, the ground also needs to be hardened. The column foundation is poured with 700 * 700 * 700mm concrete, and 300 * 300 * 12mm steel plate is embedded.
3. Precautions for reinforcement processing shed on site:
1. Generally, the reinforcement processing shed is within the lifting range of the tower crane, otherwise it is inconvenient to lift the reinforcement. At the same time, double-layer hard protection must be set up, and the specific size of the shed should be determined according to the actual situation.
2. The top of the protective shed has two layers. The upper layer is paved with formwork, and the lower layer is paved with two layers of bamboo chips. The spacing between the two layers is 500 mm.
3. Tool type reinforcement processing shed shall be hung with operation instruction board and banner of safety propaganda language at a conspicuous place. The size of the board is: width × height=2000mm × 1000mm, and the width of the banner should be 1m.
4. The ground of the processing workshop needs to be hardened, and the concrete ground should be selected.
5. There are fire extinguishers, rebar processing equipment and lighting system inside
6. The ground of the processing workshop needs to be hardened, and the concrete ground should be selected.
7. In the south, in case of typhoon, windproof measures should be taken, and wind rope can be set.
